In the Name of Allah,

The most compassionate, the most merciful

You are my creator. I worship you and only trust on you, I am alone and you are everything to me and this is enough for me.

Everything belongs to you

Curriculum Vitae (Activities in ultrasonic area have been highlighted by violet color)

Name: Amir                                                                                     

Surname: Abdullah                                                                                         

Borne in: 9/12/1955 in Tehran-Iran                                                              

Birth Certificate No.: 8356

Nationality: Iranian

Marital Status: Married-Two Children

Address: Third floor, No. 14, Cross of Alvand 12 and pooria, Shahid Ebrahimi Ave., Pardissan Town, Tehran-Iran, Postal Code 1463735764

Mobile: +98-912-1045319

E-mail: amirah@aut.ac.ir , abdullah.amir@persiankeytech.com &

             abdullah.amir@gmail.com

Academic Qualifications:

 

Degree

 

 

Field of Study

 

Place

 

Year of Graduation

-B.Sc. 1st

Deg. of Honor

 

-M.Sc. -1st

Deg. of Honor

 

-Ph.D.

Mechanical

Engineering

 

Advanced Manuf.

Technology

 

Sharif Univ.

(EX Aryamehr)

Tehran - Iran

UMIST

U.K.

 

1979

 

 

1985

 

 

1989

Thesis Title:

M.Sc. “A Study of Process Measuring Devices for Transistorized EDM”

Ph.D. “Voltage Injection and Performance Evaluation in EDM”

 

Professional Experiences:

1.      Participation in a project for Computerized Thermodynamic Balance and Defect Identification in the Steam Cycle of NEKA Electrical Power Station (advanced Benson-type power plants in the north of Iran) as a member of the team since 1979 for two years

2.       Head of Mech. Eng. Dept. of Education Organization of Ministry of Power of   I-R-Iran since 1979 for two years

3.      Participation in a project for design of a Diesel Engine for a car manufacturing company in Iran since 1981 for one year

4.      A member of Manufacturing and Production Dept. of I-R-Iran Aircraft Industries since 1981 for two years

5.      Instructor of Special Manufacturing Lab. at B.Sc. and M.Sc. levels at UMIST (U.K.) since 1986 for three years

6.      Academic member of Manufacturing and Production Division of Mech. Eng. Dept. of Tarbiat Modarres Univ. (T.M.U.) since July 1989 until July 2002

7.      Head of Manuf. and Prod. Group of T.M.U. since 1990 for one year

8.      Head of Mech. Eng. Division of T.M.U. since 1991 for one year

9.      Head of Engineering School of T.M.U. since January 1992 until August 1993 for two years

10.  Cooperation with Manufacturing and Production Department of Mech. Eng. Faculty of Amirkabir Univ. (Tehran Poly-technique) since July 1989 until July 2002

11.  Managing and Practical Participation in a Project related to design and manufacture of a Computerized Two–Axis Electro–Discharge Wire–Cutting Machine since 1990 for two years

12.  Work on Design and Manufacture of a Power–Supply Source and Control – Circuits for Transistorized Electro–Discharge Machine in 1990

13.  Managing and practical participation in a project named “Metrology, Dimensional Quality Control and Machining of 1st Stage Blades of Gas Turbine Engine F5-GE” since Feb. 1994 until July 1996

14.  Head of Manuf. and Prod. Committee of Car Manufacturing Plan of Ministry of Industries of I-R Iran Since Oct. 1994 until July 1996

15.  Supervision of Gas–Turbine blade Manufacturing in Advanced Manufacturing Research Center, TehranIran, since Sept. 1996 until 2005

16.  Senior Advisor in selection of Large, Medium and Small size Machine Tools and supervisor of acceptance tests of the machines for establishment of a company for Manufacture of “V94-2 - Siemens Gas Turbines” and “Steam Turbines” for electricity generation. The company name is called  IRAN TURBINE MANUFACTURING COMPANY (TUGA), Since May 1999 until 2005

17.  Senior Advisor in selection of Large, Medium and Small size Machine Tools and supervisor of acceptance tests of the machines for establishment of IRAN GAS TURBINE BLADE MANUFACTURING COMPANY (PARTO), Since July 2003 until 2005

18.  Secretary of 5th Manufacturing Engineering Conference Feb. þ2003

19.  Secretary of 6th Manufacturing Engineering Conference Dec. 2003

20.  Head of New Technologies Research Center since Jan. 2003 until July 2004

21.  Academic member of Manufacturing and Production group of Mech. Eng. Faculty of Amirkabir University of Technology since July 2002 until now

22.   A member of Mechanical Engineering Committee of Supreme Council of     Planning of Ministry of Science, Research and Technology since Feb. 1998 until Feb. 2005

23.  Vice-president of Society of Manufacturing Engineering of Iran since Oct. 2002 until Oct. 2005

24.  Managing Director of Persian Keyan Technologies Company since September 2005 till now

25.  Senior Advisor in design of production line and selection of Large, Medium and Small size Machine Tools and supervisor of acceptance tests for quality of the machines for establishment of a company for Manufacture of  “SGT 600 - Siemens Gas Turbines” for Gas compression and transfer into the pipelines. The company name is called Oil Turbo Compressor Engineering Company (OTEC), Since June 2007 until now

26.  Senior Advisor in design of production line and selection of Large, Medium and Small size Machine Tools and supervisor of acceptance tests for quality of the machines for establishment of a company for Manufacture of “Gas compressors” for Gas compression and transfer into the pipelines. The company name is called “Turbo Compressor Manufacturing Company” (OTCE), Since March 2008 until now

27.  Member of Advisory Board of Mekanikal Engineering Journal, Faculty of Mechanical Engineering, Universiti Teknologi, Malaysia, since 2007 until now

28.  Member of Editorial Board of Amirkabir Scientific-Research Journal, Amirkabir University of Technology, Tehran-Iran, since Oct. 2011

29.  Head of Technical Committee of Machine Tools Qualification Assessment (TC39) of ISO, Standard and Industrial Research Organization of Iran, since June 2011 until now

30.  A Member of board of Society of Manufacturing Engineering of Iran since June 2011 until now.

31.  Head of Materials Forming Enterprise, Amirkabir University of Technology, Tehran-Iran, since Oct. 2011 until now.

32.  A Member of educational council of Mech. Eng. Faculty of Amirkabir University of Technology, Tehran-Iran, since Dec. 2011 until now.

33.  A Member of research council of Mech. Eng. Faculty of Amirkabir University of Technology, Tehran-Iran, since Oct. 2011 until now.

 

Instructed Courses:

Name of Courses

Unit Value

Teaching Times

Level

Teaching Place

1.      Metrology (+Lab)

2.      Nontraditional Manufacturing Processes (+Lab)

3.      Manufacturing Special Language (English)

4.                         

5.      Electro-physical Manufacturing Methods (+Lab)

6.      Test & Control of Machine Tools

7.      Advanced CNC

8.      Advanced Metrology (+Lab)

9.      Selected Topics in Electro physical Methods

10.  Advanced Grinding

2(+1)=3

2(+1)=3

 

2

 

3

3(+1)=4

 

 

3

 

3

2(+1)=3

3

 

3

40

40

 

4

 

2

35

 

 

30

 

7

5

2

 

1

B.Sc.

B.Sc.

 

B.Sc.

 

M.Sc.

M.Sc.

 

 

M.Sc.

 

M.Sc.

M.Sc.

M.Sc.

 

Ph.D.

*♥ª

*♥

 

*

 

$

*$♫§

 

 

*$♫§ª

 

$Δ£

*

*$

 

$

 

*Amirkabir Univ. (Tehran Polytechnique), Mech. Eng. Faculty, TehranIran

$ Tarbiat Modarres Univ., Graduate Engineering School, TehranIran

Δ Sharif Univ. of  Tech., Mech. Eng.  Faculty, TehranIran

£ Tehran Univ., Mech. Eng. Dept., TehranIran

  Tabriz Univ., Mech. Eng. Dept., TabrizIran

Mazanderan Univ., Mech. Eng. Dept., Babol – Iran

§ Shahid Rajaie University, Mechanical Engineering Department, TehranIran

ª Arak University of Technology, Arak-Iran

 

Courses Ready to be Instructed:

Name of Course

Unit Value

Level

1- Manufacturing Systems

3

M.Sc.

 

Workshop and Laboratory Supervision:

1.      Special Manufacturing – Processes Workshop in University of Manchester Institute of Science and Technology (UMIST), Manchester  – United Kingdom of Great Britain, since 1986 until 1989 for three years

2.      Special Manufacturing – Processes Workshop in Amirkabir University, TehranIran, since 1989 until now

3.      Metrology Laboratory in Amirkabir Univ. TehranIran, since 1989 until now

4.      Metrology Laboratory in Tarbiat Modarres Univ., TehranIran, since 1992 until 2002

 

Supervised Academic Seminars:

1.      A Study and Comparison Between the Lubrication Methods of Moving Components of Machine Tools (M.Sc. Seminar-2 units-ter. in Nov. 1992)

2.      A Study and Comparison Between the Methods of Measurement and Control of Displacement, Speed and Acceleration in Machine Tools and Determining Parameters Influencing their Performance and Selection (M.Sc. Seminar-2 units-ter. in Sept. 1993)

3.      A Study and Comparison Between the Methods of Generation of Displacement and Driving Systems in Machine Tools and Determining Parameters Affecting Their Performance and Selection (M.Sc. Seminar-2 units-ter. in Sept. 1993)

4.      A Study on Water–Jet & Abrasive Water–Jet Cutting Processes and Determining Parameters Affecting the Design and Manufacture of the Respective Machines (M.Sc. Seminar-2 units-ter. in Nov. 1993)

5.      A Study on Parameters Influencing on Selection of Machine Tools (M.Sc. Seminar-2 units-ter. in Nov. 1993)

6.      Parameters Affecting Design and Manufacture of Non-standard Components for CNC Lathe (M.Sc. Seminar-2 units-ter. in Dec. 1993)

7.      A Study on Power Transmission Systems for Machine Tools and Determining Parameters Affecting their Performance and Selection (M.Sc. Seminar-2 units-ter. in Feb. 1994)

8.      Installation, Routine Services, Maintenance and Test of Machine Tools with Special Reference to Lathe and Milling Machines (M.Sc. Seminar-2 units-ter. in Feb. 1994)

9.      A Study on Linear, Rotary and Bush Bearings for Machine Tools and Determining Parameters Affecting their Performance and Selection (M.Sc. Seminar-2 units-ter. in Feb. 1994)

10.  Stability and Parameters Affecting Stability in Wirecut EDM (M.Sc. Seminar-2 units-ter. in March 1994)

11.  Laser Application in Manufacturing and Industry (M.Sc. Seminar-2 units-ter. in March 1994)

12.  A Study and Comparison of CNC Control Systems of Machine Tools Fabricated by Different Famous Manufacturers (M.Sc. Seminar-2 units-ter. in April 1994)

13.  A Study on Parameters Affecting Wear and Corrosion of Machine Tools Components and their Protection Methods (M.Sc. Seminar-2 units-ter. in April 1994)

14.  High Energy Rate Forming by Magnetic Field (M.Sc. Seminar-2 units-ter. in August 1994)

15.  High Efficiency Deep Grinding (M.Sc. Seminar-2 units-ter. in May 1995)

16.  Electro–Chemical Machining of Gas Turbine Blades (M.Sc. Seminar-2 units-ter. in July 1995)

17.  Machine Tools Sensors (M.Sc. Seminar-2 units-ter. in Oct. 1995)

18.  Machining of Super Alloys (M.Sc. Seminar-2 units-ter. in Feb. 1996)

19.  Gas–Turbine Blade Hole Drilling (M.Sc. Seminar-2 units-ter. in June 1999)

20.  Sources of Errors in Robots (M.Sc. Seminar-2 units-ter. in July 2000)

21.  Precise Boring using Intelligent Tools (M.Sc. Seminar-2 units-ter. in March 2001)

22.  A Study on GAS Turbine Blade Hole Drilling Methods (Ph.D. Seminar-3 units-ter. in Jan. 2002)

23.  A Study on Technical and Engineering Capabilities of Well-known Internet Search-Engines (Ph.D. Seminar-3 units-ter. in Jan. 2002)

24.  Creep–feed Grinding of Hard Metals, Alloys and Composites (M.Sc. Seminar-2 units-ter. in Aug. 2002)

 

Keynote Speeches and Seminars for Industry:

1.      A. Abdullah “Applications of Electro-Discharge Machining in Die-Making” the 1st Seminar of Die Design and Manufacture, Iran Die-Manufacturing Society, Tehran-Iran, Jan. 1990 (Persian Lan.)

2.      A. Abdullah “Non-contact Metrology Devices” Seminar of Metrology in Heavy Industries, Ministry of Heavy Industries of I-R-Iran, Tehran-Iran, Nov. 1992 (Persian Lan.)

3.      A. Abdullah “Ultrasonic and its Applications in Machining Processes” the 4th Seminar of Die Design and Manufacture, Ministry of Heavy Industries of I-R-Iran, Isfahan-Iran, Jan. 1993 (Persian Lan.)

4.      A. Abdullah “Manufacturing Engineering State and Trends” Keynote Speech, the 2nd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Jan. 1996 (Persian Lan.)

5.      A. Abdullah “High-speed High-energy-density processes and Trends” the 3rd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Dec. 1996 (Persian Lan.)

 

Supervised Academic Projects:

a.       Graduated Students:

Ø  B.Sc. (Bachelor of Science)

1.      Seyed Hossienchi – Seyed Nader, “EDM Process and Determining Operational and Performance Curves of DECKEL DE-20 ED Machine under Low Voltage”, B.Sc. Proj. -3 units-ter. in Nov. 1990 (Supervisor)

2.      Talebiani – Ali, “EDM Process and Determining Operational and Performance Curves of DECKEL DE-20 ED Machine under High Voltage”, B.Sc. Proj. -3 units-ter. in March 1991 (Supervisor)

3.      Shahsavarani – Alireza, “EDM Process and Determining Operational and Performance Curves of AZ-50 ED-Machine with Isofrequency Power–Supply”, B.Sc. Proj. -3 units-ter. in April 1991 (Supervisor)

4.      Bayyat – Mohammad, “EDM Process and Determining Operational and Performance Curves of AZ-60 ED-Machine with Isopulse Power–Supply” B.Sc. Proj. -3 units-ter. in June 1991 (Supervisor)

5.      Abrishami – Hamid Reza, “ED-Wirecut Process and Investigating Influence of Parameters on the Stability of Charmilles Robofil-200”, B.Sc. Proj. -3 units-ter. in August 1991 (Supervisor)

6.      Froughi – Hassan, “Ultrasonic Machining Process and Design of the Machine Mechanical Parts”, B.Sc. Proj. -6 units-ter. in Feb. 1992 (Supervisor)

7.      Radan – Kourouse, “Ultrasonic Machining Process and Design of the Machine Mechanical Parts”, B.Sc. Proj. -6 units-ter. in Feb. 1992 (Supervisor)

8.      Tahmaseb – Mahdi, “Chemical Machining Process and Investigating Effect of Machining Parameters on Machining Results with Special Reference to Steel Work piece and Ferric Chloride Etchant”, B.Sc. Proj. -3 units-ter. in May 1992 (Supervisor)

9.      Rassifard – Abdulreza, “Calculation and Selection of Mechanical–Electrical Components for Converting a Manual Milling Machine to CNC”, B.Sc. Proj. -3 units-ter. in Dec. 1993 (Supervisor)

10.  Farsi – Mohammad, “Factors Affecting Electro-chemical Engraving”, B.Sc. Project-3 units-ter. in June 2000 (Supervisor)

11.  Alirezaie – Tayebeh, “Effect of Shotpeening on surface properties of Inconel-738 LC”, B.Sc. Project-3 units-ter. in Oct. 2001 (Supervisor)

12.  Tahmasebi – Khashayar, “Ultrasonic Assisted Extrusion”, B.Sc. Project-3 units – ter. in Nov. 2003 (Supervisor)

13.  Baghizadeh – Ebrahim, “A Study on Necessities of Quality Assurance System of Measuring Equipment with reference mainly to ISO 10012 and ISO 10725”, B.Sc. Project-3 units – ter. in Nov. 2003 (Supervisor)

14.  Davarzani – Hossien, “Design and Manufacture of a High–Power Piezo–electric Ultrasonic Head”, B.Sc. Project-3 units – ter in July 2004 (Supervisor)

15.  Vegdani Jahromi – Mohammad, “Feasibility Study and Business Plan of Manufacture of Ultrasonic Cleaning Systems”, B.Sc. Project–3 units-ter. in Sept. 2006 (Supervisor)

16.  Soltani – Mohammad, “Manufacture of Piezoelectric Ultrasonic Head”, B.Sc. Project-3 units-ter. in Sept. 2006 (Supervisor)

17.  Rezaie – Ali, “Design and Manufacture of a Test Fixture for Determination of Fatigue Life of Human Tooth”, B.Sc. Project-3 units-ter. in Oct. 2006 (Supervisor)

18.  Maghsoudi – Samira, “Investigating the Dimensional and Strength Properties of Interlock Cotton Textile by Using Ultrasonic Cleaning”, B.Sc. Project-3 units-ter. in Nov. 2006 (Supervisor)

19.  Mirbagheri – Alireza, “Sculpturing techniques by using CNC technology”, B.Sc. Project-3 units-ter. in April 2007 (Supervisor)

20.  Babaie – Hossien, “Design and manufacture of a heat transferring cell for investigating heat transfer by Liquid-nano-powder mixture under ultrasonic action”, B.Sc. Project–3 units- ter. in Sept. 2008 (Supervisor)

21.  Kazemi – Mohammad, “Design and manufacture of a heat transferring cell for investigating heat transfer by Liquid-nano-powder mixture under ultrasonic action”, B.Sc. Project–3 units- ter. in Sept. 2008 (Supervisor)

22.  Akhtari Brojeni – Yashare, “Investigating tool life in ultrasonic assisted turning”, B.Sc. Project–3 units- ter. in Nov. 2008 (Supervisor)

23.  Ghajar – Mohammad Hossein, “Fabrication of Nano-needles for Nono-machining”, B.Sc. Project–3 units- ter. in Jan. 2009 (Supervisor)

24.  Hayyati – Abolfazle, “Study and comparison of available models for estimation of hysteresis in piezo-electric actuators”, B.Sc. Project–3 units, Amirkabir University, ter. in April 2009 (Supervisor)

25.  Ranjbari – Mohammad Reza, “Three dimensional modeling of turbine nozzle using reverse engineering”, B.Sc. Project-3 units-, Amirkabir University, ter. in Sept. 2009 (Supervisor)

26.  Lalehpoor – Shamsuldin, “Pre-stressing by ultrasonic waves”, B.Sc. Project–3 units, Amirkabir University, ter. in Nov. 2011 (Supervisor)

 

Ø  M.Sc. (Master of Science)

1.      Khazandi – Ali, “Vibration Analysis of Nozzle in Propelling Systems with S–F Engine”, M.Sc. Proj. -6 units-ter. in Dec. 1992, (Co–advisor)

2.      Saghafinia – Mojtaba, “Design and Manufacture of a Two–Axis Computer–Numerical–Control System (Hardware and Software) for a Centre Lathe”, M.Sc. Proj.-12 units-ter. in Sept. 1993(Co–advisor)

3.      Mohammadi – Kamal, “Design of a Magnetic Transducer (Electro–Mech. Components) and an Ultrasonic Concentrator working at 22KHZ Frequency and at least 1KW Power”, M.Sc. Proj. -6 units-ter. in April 1994 (Supervisor)

4.      Kouklan – Mohammad Hossien, “Machining and Quality Control Tests of Gas Turbine Blades”, M.Sc. Proj. -6 units-ter. in April 1994 (Supervisor)

5.      Attarseyedi – Siamac, “Design and Manufacture of a Magnetic Linear Scale for Measurement of Displacement” M.Sc. Proj. -6 units-ter. in July 1994 (Co–advisor)

6.      Mahdipour Aghabagher – Mahdi, “Translation of Auto – CAD Drawing Files to CNC Codes”, M.Sc. Proj. -6 units-ter. in July 1994 (Co–advisor)

7.      Mehrara – Mahmoud, “Design and Manufacture of a Pressure Intensifier for Water–Jet Cutting”, M.Sc. Proj. -6 units-ter. in June 1995 (Supervisor)

8.      Mojtabaie – Fariborz, “Design and Manufacture of a Water – Jet Head and Nozzle”, M.Sc. Proj. -6 units-ter. in June 1995 (Supervisor)

9.      Mohaghegh –Kamran, “Electro–resistive Grinding. A New Approach for Machining Hard Materials”, M.Sc. Proj. -6 units-ter. in June 1995 (Supervisor)

10.  Asadi Lari – Ali, “Wear Reduction in Cylinder of High Power Diesel Engine”, M.Sc. Proj. -6 units-ter. in Aug. 1995 (Co–advisor)

11.  Alinaghipoor – Alireza, “Manufacture of a Magnetic Transducer and an Ultrasonic Concentrator working at 22 KHZ Frequency and 1KW Power”, M.Sc. Proj. -6 units-ter. in Jan. 1996 (Supervisor)

12.  Froughi – Hassan, “Creep–Feed Grinding of Gas–Turbine Blades”, M.Sc. Proj. -6 units-ter. in Jan. 1997 (Supervisor)

13.  Rassifard – Abdolreza, “Ultrasonic Assisted Electroforming”, M.Sc. Proj. -6 units-ter. in March. 1997 (Supervisor)

14.  Javaheripoor – Jalal, “Design and Manufacture of an Ultrasonic Knife”, M.Sc. Proj. -6 units-ter. in Sept. 1997 (Supervisor)

15.   Nosratkhah – Mehran, “Turbo-charger Blade Manufacture using SiC”, M.Sc. Proj. -6 units-ter. in May 1999 (Supervisor)

16.  Mohammadi Aliabadi – Bagher, “Reverse Engineering Method with Reference to Blades and Turbine Disk Blisk”, M.Sc. Project-6 units-ter. in March 2001 (Supervisor)

17.  Ghodsi – Mojtaba, “Design and Manufacture of a Linear Stepper Motor”, M.Sc. Project-6 units-ter. in Sept. 2002 (Supervisor)

18.  Shahsavari – Mahdi, “Design and Manufacture of a Special Grinding Machine for Surgery Knives”, M.Sc. Project-6 units-ter. in Oct. 2002 (Supervisor)

19.  Pak – Abbas, “Creep–feed Grinding of Profiled Groove on WC-20%Co Mandrel”, M.Sc. Project-6 units-ter. in March 2003 (Supervisor)

20.  Alavi – Seyyed Hassan, “Using Artificial Neural Network and Genetic Algorithm in Vibration Monitoring of a Gear Train”, M.SC. Project-6 units-ter. in Sept. 2003 (Co–advisor)

21.  Jalali Aghchay – Abdulhossien, “Test and Verification of Nonconductive-Bond between Magnetic Permenduer Thin Plates for High Power Ultrasonic Head”, M.Sc. Project-6 units – ter. in Feb. 2004 (Supervisor)

22.  Karimi – Mohammad, “Design, Analysis and Manufacture of a Linear DC Motor”, M.Sc. Project-6 units – ter. in March. 2004, Tarbiat Moddares Univ. (Co–advisor)

23.  Sardarizadeh – Amir Hossien, “Influence of a Circular Magnetic–Field on Plasma in EDM”, M.Sc. Project-6 units – ter. in April 2004 (Supervisor)

24.  shahini – Mohsen, “Design and Manufacturing of a 1 kW – 22 kHz Piezo-Electric Transducer”, M.Sc. Project-6 units – ter. In July 2004 (Supervisor)

25.  Nikzad – Mostafa, “Ultrasonic Assisted Electro-discharge Machining of Steels” M.Sc. Project-6 units – ter. in July 2004

26.  Vali Mirzalou – Ali, “Electro-Discharge Wire Cutting of Compressor Blade Root of Gas Turbines”, M.Sc. Project-6 units-ter. in Feb. 2005, Khajeh Nasireddin Toosi (Supervisor)

27.  Hojjati – Mahdi, “Simulation and Investigation of Parameters affecting on Residual Stresses of Creep-feed Grinding of Inconel 738 LC”, M.Sc. Project-6 units-ter. in May 2006 (Supervisor)

28.  Shalvandi – Maghsoude, “Fatigue Strength of Stainless-Steel Welded Joints processed by Ultrasonic Peening” M.Sc. Project–6 units-ter. in Sept. 2006 (Supervisor)

29.  Fallahi Sichani – Ehsane, “Investigation of Ultrasonic Wave Attenuation in Building Materials”, M.Sc. Project–6 units-ter. in Dec. 2006 (Supervisor)

30.  Eskandari – Ahmad, “Hardness, Chemical Resistance and Metallurgical Properties of Stainless-Steel Welded Joints processed by Ultrasonic Peening”, M.Sc. Project–6 units – ter. in May 2007 (Supervisor)

31.  Froughi – Siamac, “Ultrasonic-Transducers Optimum Arrangements on a Vibrating Plate for Cleaning Purpose”, M.Sc. Project–6 units – ter. in May 2007 (Supervisor)

32.  Baghizadeh – Ebrahim, “Ultrasonic Cleaning of Vegetables and Fruits”, M.Sc. Project–6 units – ter. in Oct. 2007 (Supervisor)

33.  Hajali Mohammadi – Alireza, “Design and Manufacture of a Compound Matching for Multi Ultrasonic Heads”, M.Sc. Project-6 units- ter. in March 2008 (Supervisor)

34.  Shams Koupaie – Mohammad, “Design and Manufacture of a Positioning Axis with Micrometer Accuracy”, M.Sc. Project–6 units – ter. in May 2008 (Supervisor)

35.  Sotoodeh Zadeh – Mohammad, “Modeling of Ultrasonic Vibrations of a Square Block Work-piece in Ultrasonic Assisted Creep-Feed Grinding”, M.Sc. Project–6 units– ter. in Nov. 2008 (Supervisor)

36.  Sarvi HampaParviz, “Ultrasonic assisted milling”, M.Sc. Project–6 units-ter in April 2008 (Co-advisor)

37.  Sorie Solute– Reza, “Determination of Ultrasonic wave transmission attenuation in soil”, M.Sc. Project–6 units-ter. in Sept. 2009, Amirkabir University (Supervisor)

38.  Abedini– Rezvan, “Ultrasonic peening-head design and manufacture”, M.Sc. Project–6 units-ter. in Jan. 2010, Amirkabir University (Supervisor)

39.  Maleki– Masoud, “Ultrasonic damping in metallic materials”, M.Sc. Project–6 units-ter. in Jan. 2010, Amirkabir University (Supervisor)

40.  Farhadi – Ahmad, “Ultrasonic assisted grinding of super-alloys”, M.Sc. Project–6 units-ter. in Jan. 2010, Isfahan University of Technology (Supervisor)

41.  Abyar Firozabadi – Hamid, “Electro-discharge wire-cutting parameters for accurate small curvature generation”, M.Sc. Project–6 units-ter. in June. 2010, Isfahan University of Technology (Co-advisor)

42.  Fartashvand– Vahid, “Ultrasonic Transfer to Air”, M.Sc. Project–6 units-ter. in June. 2010, Amirkabir University (Supervisor)

43.  Rahimzadeh– Amir Hossein, “Ultrasonic damping in solid nonporous materials”, M.Sc. Project–6 units- ter. in Sept. 2010,  Amirkabir University (Supervisor)

44.  Sohrabifard– Mahfouze, “Ultrasonic assisted deep drawing”, M.Sc. Project–6 units-ter. in June 2010, Shahid Rajaee University (Supervisor)

45.  Ghaffari– Hamed, “Master slave robot Control”, M.Sc. Project–6 units-ter. in Oct. 2010 Amirkabir University (Joint Supervisor)

46.  Rasoli – Mehrdad, “Ultrasonic peening effects on welded Steel A517 and P460N”, M.Sc. Project–6 units-ter. in Dec. 2010, Malek Ashtar University of Technology (Supervisor)

47.  Abbasi – Ali Reza, “Surface Nano-crystal Structure Modification  by Ultrasonic”, M.Sc. Project–6 units-ter. in Feb. 2011, Najaf Abad Open University,(Supervisor)

48.  Eskandari – Sina, “Thermal effects on accuracy of machine tools”, M.Sc. Project–6 units-ter. in March. 2011, Amirkabir University (Joint Supervisor)

49.  Rayat Zadeh – Hamid Reza, “Ultrasonic assisted nano-liquid heat transfer”, M.Sc. Project–6 units, Amirkabir University, ter. in April 2011 (Co-advisor)

50.  Paknejad– Masihe, “Theoretical and Experimentsl Analysis of indentation forming of inner bore of tubes”, M.Sc. Project–6 units- ter. in June. 2011, Amirkabir University (Supervisor)

51.  Dashti – Saeid, “Simulation and Experimentsl Analysis of indentation forming of inner bore of tubes”, M.Sc. Project–6 units-ter. in June. 2011,  Amirkabir University (Supervisor)

52.  Kazemi – Mohammad, “Study on Vibratory Stress Relieving of Welded Parts”, M.Sc. Project–6 units-ter. in Feb. 2012, Amirkabir University (Supervisor)

 

Ø  Ph.D. (Doctor of Philosophy)

1.      Mahdavi Nejad –Ramezan Ali, “Investigating the Reasons for Instabilities of ED Machining of Tungsten Carbide and Silicon Carbide Materials”, Ph.D. Project-20 units-ter. in Feb. 1999, Tarbiat Moddaress Univ. (Supervisor)

2.      Haghighat – Heshmatullah, “Analysis of Three Dimensional Milling using Spherical Tip Tools”, Ph.D. Project-20 units-ter. in Oct. 2000 (Co – advisor)

3.      Javabvar – Darush, “Very high energy rate Forming of Metallic Sheets into Conical Shapes”, Ph.D. Project-20 units-ter. in May 2001, Tarbiat Moddaress Univ. (Co–advisor)

4.      Behzadipoor – Mohammad Reza, “Modular Fixture Design for Milling and Grinding Operations”, Ph.D. Project-20 units-ter. in Dec. 2002 (Co–advisor)

5.      Sodiefian – Gholam Hossien, “Measurement of Nonlinear Viscoelastic properties of Polymer Blends in Simple Shear Flow”, Ph.D. Project-20 units-ter. in Jan. 2004 (Co–advisor)

6.      Salami Naserian – Mohammad, “Tool Wear and Surface Topology Optimization in Ball–nose End–Milling” Ph.D. Project-20 units-ter. in March 2005 (Co–advisor)

7.      Mohaghegh – Kamran, “Reverse Engineering of GAS -Turbine moving Bucket with Reference to Design Intent”, Ph.D. Project-20 units-ter. in Feb. 2006 (Co-advisor)

8.      Shabgard – Mohammad Reza, “Ultrasonic Assisted Electro-discharge Machining of Tungsten Carbide”, Ph.D. Project-20 units – ter. in Sept. 2006 (Supervisor)

9.      Pak – Abbas, “Modeling and Theoretical Analysis of Two Hammer Type Ultrasonic Transducers”, Ph. D. Project – 20 units – ter. in July 2008 (Supervisor)

10.  Amini – Saied, “Ultrasonic Assisted Turning of Super-alloys”, Ph.D. Project–20 units – ter. Feb. 2009 (Co-advisor)

11.  Modaberifar – Mahdi, “Theoretical and practical analysis of powder displacement by variable electric fields”, Ph.D. project – 20 units, Tarbiat Modarres University, ter. in Sept. 2009 (Joint Supervisor)

12.  Tahmasebi – Ghodrate, “Electro-discharge Nano machining”, Ph.D. Project–20 units, Tarbiat Modarres University, ter. in Dec. 2009 (Co-advisor)

13.  Zareie Negad – Mohammad, “Master-slave Robot for Nano Positioning”, Ph.D. Project–20 units, Amirkabir University, ter. in Dec. 2009 (Joint Supervisor)

14.  Kalteh – Mohammad, “Numerical and experimental investigation of forced heat convection of nano-liquid over a microcontroller (heat sink)”, Ph.D. Project–20 units, Amirkabir University, ter. in Sept. 2010 (Co-advisor)

15.  Tajik – Behnaz, “Ultrasonic assisted nano-liquid heat transfer”, Ph.D. Project–20 units, Amirkabir University, ter. in Dec. 2010 (Co-advisor)

16.  Safar – Saber, “Acoustic power transfer to air”, Ph.D. Project–20 units, Amirkabir University, ter. in Feb. 2012 (Supervisor)

17.  Razavi – Hamed, “Ultrasonic assisted Oblique Turning”, Ph.D. Project–20 units, Tarbiat Modarres University, ter in May 2012 (Joint Supervisor)

 

b.      Present Students (Continuing Projects):

Ø  B.Sc.

1.      Ahmadi, “Design and manufacture of combustion chamber for gas injection and burning”, B.Sc. Project-3units, Amirkabir University (Supervisor)

 

Ø  M.Sc.

1.      Tavakolkhah – Vahid, “Ultrasonic assisted Powder Compaction”, M.Sc. Project-6 units, Amirkabir University (Supervisor)

2.      Khan Mohammadi – Raheleh, “Powder compaction and sintering  Simulation under Ultrasonic”, M.Sc. Project-6 units, Amirkabir University (Supervisor)

3.      Lalehpoor – Shamsuldin, “Ultrasonic Strengthening of Steel Tube”, M.Sc. Project-6 units, Amirkabir University (Supervisor)

4.      Nasre Isfahani – Omid “Ultrasonic Assisted Micro-Deburring”, M.Sc. Project-6 units, Open University – Science and Research Department (Supervisor)

 

Ø  Ph.D.

1.      Aboutrabi Zarchi – Mohammad Mahdi, “Ultrasonic Assisted Milling”, Ph.D. Project–20 units, Amirkabir University (Joint Supervisor)

2.      Hajali mohammadi – Alireza, “Development of Fuel Injector-Plug”, Ph.D. Project–20 units, Amirkabir University (Joint Supervisor)

3.      Shalvandi – Maghsoud, “Ultrasonic stress relieving”, Ph.D. Project–20 units, Tarbiat Moddaress University (Joint Supervisor)

4.      Rasouli – Mohammad Ali, “Ultrasonic Assisted Spinning”, Ph.D. Project–20 units, Isfahan University of Technology (Joint Supervisor)

5.      Mohammadi – Aminullah, “Ultrasonic Assisted Electro-discharge Wirecutting”, Ph.D. Project–20 units, Isfahan University of Technology (Co-advisor)

6.      Abedini – Rezvan, “Ultrasonic Assisted Powder Compaction under Sintering”, Ph.D. Project–20 units, Amirkabir University (Joint Supervisor)

7.      Fartashvand – Vahid, “Ultrasonic Assisted Powder Compaction without Sintering”, Ph.D. Project–20 units, Amirkabir University (Joint Supervisor)

8.      Paknegad – Masih, “Ultrasonic Assisted Grinding Heat Transfer”, Ph.D. Project–20 units, Amirkabir University (Supervisor)

9.      Vahdati – Mahdi, “Ultrasonic Assisted Sheet Metal Mill-Forming”, Ph.D. Project–20 units, Tehran University (Co-advisor)

 

Terminated Research Plans:

1.      Manufacture of a Set of 120 GE-Frame 5 Gas Turbine Blades. (two years-ter. in Jan. 2000)

2.      Manufacture of four sets of high precision Forging Dies for Pejout-405 Tulip of Axle. (9 month-ter. in March 2000)

3.      Manufacture of 6 Complete sets of High Precision Tungsten Carbide Die and Punches for Special Thin Blade Manufacture (Accuracy +0.001 mm) (4 years-ter. in May 2000)

 

Patented Works:

1.      “Spark and Control Circuits of ED Machine” Patented in Scientific and Industrial Research Organization of Iran in 1991

2.      “Electro-resistive Grinding Machine” Patented in Scientific and Industrial Research Organization of Iran in 1996

3.      “Design and Manufacture of High Power High Frequency Ultrasonic Transducer by Using Central Mass” Patented in Scientific and Industrial Research Organization of Iran in 2008

4.      “Design and Manufacture of Multi-frequency and High Power Ultrasonic Transducer” Patented in Scientific and Industrial Research Organization of Iran in 2009

5.      “Ultrasonic Peening Device” Patented in 2009

6.      “Ultrasonic Assisted Grinding” Patented in 2009

7.      “Design of  Piezo-electric Ultrasonic Transducer with Consideration of Damping” Patented in 2010

8.      “Ultrasonic Heat Exchanger” Patented in 2010

9.      Wire-Cut Small Curvature Generation in Roughing” Patented in 2010

10.  “Wire-Cut Small Curvature Generation in Finishing” Patented in 2010

11.  “Design and Manufacture of Ultrasonic Assisted indentation Forming” Patented in 2011

 

Awards:

1.      Winner of the 2nd Laureate Applied Research Prize of Khwarizmi International Award for Gas Turbine Blade Manufacture, Tehran-Iran, Feb. 1997

2.      Winner of the 3rd Laureate Applied Research of 21st Khwarizmi International Award for Design and manufacture of high power Magneto-striction ultrasonic head, Tehran-Iran, Feb. 2008

3.      Winner of the 3rd Laureate Applied Research of 24st Khwarizmi International Award for Design and Manufacture of Nano-Tip Needle, Tehran-Iran, 2010  

 

Publications:

Ø  Published by International Journals (outside Iran)

1.      K. Mohaghegh, M. H. Sadeghi, A. Abdullah “Reverse Engineering of Turbine Blades based on Design Intent” published by Springer London, The International Journal of Advanced Manufacturing Technology (IJAMT), May 2006 (English Lan.)

2.      M.T. Shervani-Tabar, A. Abdullah, M.R. Shabgard “Numerical study on the dynamics of an electrical discharge generated bubble in EDM” published by ELSEVIER, Journal of Engineering Analysis with Boundary Elements, No. 30, April 2006, pp 503-514 (English Lan.)

3.      A. Abdullah, A. Pak, M. Farahi, M. Barzegari “Profile Wear of Resin-Bonded Nickel-Coated Diamond Wheel and Roughness in Creep-Feed Grinding of Cemented Tungsten Carbide” published by ELSEVIER, Journal of Materials Processing Technology, No. 183, 2007, pp 165-168 (English Lan.)

4.      M.T. Shervani-Tabar, A. Abdullah, M.R. Shabgard “Numerical and experimental study on the effect of vibration of the tool in ultrasonic assisted EDM” published by Springer London, The International Journal of Advanced Manufacturing Technology (IJAMT), ISSN 0268-3768 (print) 1433-3015 (online), Feb. 2007 (English Lan.)

5.      Amir. Abdullah, Mohammad R. Shabgard “Effect of Ultrasonic Vibration of Tool on Electrical Discharge Machining of Cemented Tungsten Carbide (WC-Co)” published by Springer London, The International Journal of Advanced Manufacturing Technology (IJAMT), ISSN 0268-3768 (print) 1433-3015 (online) Sept. 2007 (English Lan.)

6.      A. Abdullah, A. Pak “Correct Prediction of the Vibration Behavior of a High Power Ultrasonic Transducer by FEM Simulation” published by Springer London, The International Journal of Advanced Manufacturing Technology (IJAMT), ISSN 0268-3768 (print) 1433-3015 (online), Sept. 2007 (English Lan.)

7.      Amir Abdullah, Mohsen Shahini, Abbas Pak “An Approach to Design a High Power Piezoelectric Ultrasonic Transducer” published by Journal of Electro-ceramics (Japan), ISSN 1385-3449 (print) 1573-8663 (online), Jan. 2008 (English Lan.)

8.      Amir Abdullah, Mohammad R. Shabgard, A. Ivanov, Mohammad T. Shervani Tabar “Effect of ultrasonic assisted EDM on the Surface Integrity of Cemented Tungsten Carbide (WC-Co)” published by Springer London, The International Journal of Advanced Manufacturing Technology (IJAMT), Oct. 2007  (English Lan.)

9.      S. Amini, H. Soleimanimehr, M.J. Nategh, A. Abdullah, M.H. Sadeghi “FEM Analysis of Ultrasonic-Vibration-Assisted Turning of super-alloys with Vibratory Tool” Published by Elsevier, Journal of Material Processing Technology 20I, 2008, pp 43-47 (English Lan.)

10.  G. Tahmasebi, Y. Hojjat, V. Ahmadi, A. Abdullah “Optimization of STM/FIM nanotip aspect ratio based on the Taguchi method” Published by Springer London, The International Journal of Advanced Manufacturing Technology (IJAMT), Oct. 2008  (English Lan.)

11.  A. Abdullah, E. Fallahi “Experimental study of attenuation coefficient of ultrasonic waves in concrete and plaster” published by Springer London, The International Journal of Advanced Manufacturing Technology (IJAMT), Nov. 2008  (English Lan.)

12.  M. Zareinejad, S. M. Rezaei, A. Abdullah and S. Shiry Ghidary “Development of a Piezo-actuated Micro Tele-operation System for cell Manipulation” Published by International Journal of Medical Robotics and Computer Assisted Surgery, December 2008 (English Lan.)

13.  Modabberifar M., Hojjat Y., Abdullah A., Dadkhah M., Hajimohammadi M., “Statistical Analysis of Parameter Effects on Linear Velocity of ferrous Particles in an AC Electric Field as a New Method for Powder Transportation”, published by Springer London, The International Journal of Advanced Manufacturing Technology (IJAMT), Jan. 2009 (English Lan.)

14.  G. Tahmasebi, Y. Hojjat, V. Ahmadi, A. Abdullah “Effect of fabrication process parameters on the apex-radius of STM tungsten nanotip” published by Wiley-CTA-2008, Scanning Journal, Feb. 2009 (English Lan.)

15.  Hojjat Y., Modabberifar M., Abdullah A., Dadkhah M., “Analysis of the Dynamic Characteristics of a Three Phase Panel Type
Electrostatic Actuator Using PEM System Identification Method”,
published by The International Journal of Sensors & Actuators: A. Physical., Feb. 2009 (English Lan.)

16.  M. Zareinejad, S. M. Rezaei, H. H. Najafabadi, S. S. Ghidary, A. Abdullah and M. Saadat, “Novel multi-rate control strategy for piezoelectric actuators”, published by Proc. IMechE, J. Systems and Control Engineering, Vol. 223, Part 1, 2009 (English Lan.)

17.  Ghodrat Tahmasebipour, Vahid Ahmadi, Amir Abdullah and Yousef Hojjat, “Fabrication of STM Tungsten NANO-Tip by Electro-Chemical Etching Method”, published by International Journal of Nanoscience (IJN), Vol. 8, Issue 3, June 2009 (English Lan.)

18.  M. Zareinejad, S. M. Rezaei, S. Shiry Ghidary, A. Abdullah and M. Motamedi, “Robust Impedance Control of a Piezoelectric Stage under Thermal and External Load Disturbances”, published by Control and Cybernetics  Journal, Vol. 38, No. 3, 2009 (English Lan.)

19.  K. Mohaghegh, M. H. Sadeghi, A. Abdullah and R. Boutorabi, “Improvement of reverse-engineered turbine blades using construction geometry”, published by Springer, The International Journal of Advanced Manufacturing Technology (IJAMT), Nov. 2009 (English Lan.)

20.  M. Zareinejad, S. M. Rezaei, A. Abdullah and S. Shiry Ghidary, “Precision Control of a Piezo-Actuated Micro-Tele-manipulation System”, published by International Journal of Precision Engineering and Manufacturing, Vol. 11, No. 1, Feb. 2010 (English Lan.)

21.  Ghodrat Tahmasebipour, Vahid Ahmadi and Amir Abdullah, “Optimization of Electrochemical Etching Parasmeters in FIM/STM Tungsten Nanotip Fabrication”, published by Journal of Science, Islamic Republic of Iran, Vol. 21(1): 75-83 (2010). University of Tehran, ISSN 1016-1104, Feb. 2010 (English Lan.)

22.  Hamed Ghafarirad, Seyed Mehdi Rezaei, Amir Abdullah, Mohammad. Zareinejad and Mozafar Saadat, “Observer-Based Sliding  Mode Control with Adaptive Perturbation Estimation for Micropositioning Actuators”, published by Journal of the International Societies for Precision Engineering and Nanotechnology, DOI: 10.1016/j.precisioneng.2010.11.002, Vol. 35, 2011, pp 271-281 (English Lan.)

23.  S. Eskandari- B. Arezo- A. Abdullah, “Thermal errors Modeling of a CNC Machines Axis Using Neural Network and Fuzzy Logic”, published by Applied Mechanics and Materials, Trans Tech Publications, ISSN 1660-9336, DOI: 10.4028/www.scientific.net/AMM.110-116.2976, No. 110-116, Switzerland 2011, pp 2976-2982 (English Lan.)

24.  A. Pak- A. Abdullah, “Creep-Feed Grinding of Tungsten Carbide by Using Resin-Bonded Nickel-Coated Diamond Wheel”, published by Advanced Materials Research (AMR), ISSN 1662-8985, DOI: 10.4028/www.scientific.net/AMR.325.165, No. 325, 2011-08-22, pp 165-170 (English Lan.)

25.  A.Abdullah- A. Farhadi- A. Pak, “Ultrasonic-Assisted Dry Creep-Feed Up-Grinding of Superalloy Inconel 738LC”, published by EXPERIMENTAL MECHANICS Springer, ISSN 0014-4851, DOI: 10.1007/s11340-011-9557-1, 2011-10-12 (English Lan.)

26.  A.Abdullah- M.Maleki- E. Baghizadeh, “On the impact of ultrasonic cavitation bubbles”, published by PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C- JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Professional Engineering Publishing Ltd, ISSN 0954-4062, DOI: 10.1177/0954406211414769, 2011-06-03 (English Lan.)

27.  S. Saffar- A. Abdullah, “Determination of acoustic impedances of multi matching layers for narrowband ultrasonic airborne transducers at frequencies <2.5 MHz- Application of a genetic algorithm”, published by ULTRASONICS Elsevier Science, ISSN 0041-624X, DOI: 10.1016/j.ultras., 2011.08.001 (English Lan.)

28.  V. Rashtchi- A. Safaei, A. Abdullah, “High Precision and Auto Tune Class D Amplifier for Piezoelectric Transducers”, published by INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING-IREE Praise Worthy Prize Srl, ISSN 1827-6660, No. 6-2, 2011-04, pp 580-586 (English Lan.)

29.  A. Abdullah, M. Malaki, A. Eskandari, “Strength enhancement of the welded structures by ultrasonic peening”, published by Journal of Materials and Design, http://dx.doi.org/10.1016/j.matdes.2012.01.040, 2012, pp 7-18 (English Lan.)

30.  M.A. Rasoli, A. Abdullah, M. Farzin, A. Fadaei Tehrani, A. Taherizadeh, “Influence of Ultrasonic Vibrations on Tube Spinning Process”, published by Journal of Materials Processing Technology, ISSN 0924-0136, Doi: 10.1016/j.jmatprotec.2012.02.006, January 2012, pp 1443-1452 (English Lan.)

31.  M. M. Abootorabi Zarchi, M.R Razfar, A. Abdullah, “Investigation of the Effect of Cutting Speed and Vibration Amplitude on Cutting Forces in Ultrasonic-Assisted Milling”, published by Journal of Engineering Manufacture, DOI: 10.1177/0954405412439666, pp 1-7 (English Lan.)

32.  M.J. Nategh, H. Razavi, A. Abdullah, “Analytical modeling and experimental investigation of ultrasonic-vibration assisted oblique turning, part I: kinematics analysis”, published by Intrernational Journal of Mechanical Sciences, DOI: http://dx.doi.org/10.1016/j.ijmecsci.2012.04.007, 27 April 2012, pp 1-52 (English Lan.)

33.  H. Razavi, M.J. Nategh, A. Abdullah, “Analytical modeling and experimental investigation of ultrasonic-vibration assisted oblique turning, part II: Dynamics analysis”, published by Intrernational Journal of Mechanical Sciences, DOI: http://dx.doi.org/10.1016/j.ijmecsci.2012.05.005, 11 May 2012, pp 1-45 (English Lan.)

34.  Massoud Malaki, Amir Abdullah, Ebrahim Baghizadeh, Zahra Heidari, Chamshiri, “Complications Due to Extracorporeal Shock Wave Lithotripsy and Role of Cavitation Bubbles Impacts”, published by International Journal of Internal Medicine, DOI: 10.5923/j.ijim., pp 1-5 (English Lan.)

 

Ø  Published by National Journals (Inside Iran)

1.      A. Abdullah, M. Mehrara “Design of High-Pressure Reciprocating-Pumps” Mech. Eng. Journal, Tehran-Iran, June 1999 (Persian Lan.)

2.      A. Abdullah, R. Mahdavinejad “REFEL SiC ED-Machining Instabilities” Tehran University Engineering Journal, No. 4, Vol. 34, Feb. 2001 (Persian Lan.)

3.      A. Abdullah, R. Mahdavinejad “Tungsten Carbides ED-Machining Instabilities” Tehran University Engineering Journal, No. 4, Vol. 34, Feb. 2001 (Persian Lan.)

4.      H. Haghighat, M.H. Sadeghi, A. Abdullah “Static and Dynamic Simulation of Ball-end Milling of Die Surfaces” Tehran University Engineering Journal, No. 3, Vol. 35, Dec. 2001 (Persian Lan.)

5.      M.H. Sadeghi, H. Haghighat, A. Abdullah “Modeling of Cutting forces in Ball-end Milling process” Scientific and Research Journal of Amirkabir University, No. 49, Year 13, Feb. 2002 (Persian Lan.)

6.      G.H. Liaghat, A. Darvizeh, A. Abdullah, D. Javabvar “Analysis of wrinkling in Very high speed forming of cones and comparison with experimental results” International Journal of Engineering Science of University of Science and Industry of Iran, Tehran-Iran, No. 4, Vol. 12, Feb. 2002 (Persian Lan.)

7.      G.H. Liaghat, A. Darvizeh, A. Abdullah, D. Javabvar “ Analysis of Very high speed forming of cones, comparison with experimental and FEM simulation results” Scientific and Research Journal of Amirkabir University, Tehran-Iran, No. 50, Year 13, March 2002 (Persian Lan.)

8.      G.H. Liaghat, A. Darvizeh, A. Abdullah, D. Javabvar “Analytical and experimental investigation of influence of blank holder in wrinkling control of Very high speed forming of cones” Scientific and Research Journal of Amirkabir University, No 52, Year 13, Oct. 2002 (Persian Lan.)

9.      . G.H. Liaghat, A. Darvizeh, A. Abdullah, D. Javabvar “Analytical, Numerical and Experimental investigation of Strain profile and required actuating mass in very high speed forming of cones” Scientific and Research Journal of Amirkabir University, Tehran – Iran, No. 4, 2003 (Persian Lan.)

10.  Y. Hojjat, M. Karimi, M. Bahrami, A. Abdullah, “Design and Finite Element Analysis of Moving – Magnet Type Flat Linear DC Motor” Published in Modarres Scientific and Research Journal, April 2006 (Persian Lan.)

11.  S. Amini, M. J. Nategh, A. Abdullah, “Force Investigation in Ultrasonic Assisted Turning on Al7075 Workpiece” Published in Majlesi Journal of Mechanical Engineering, Vol. 1, Year 3, 2011, pp 43-51 (Persian Lan.)

12.  A. Abdullah, M. Malaki, “Acoustic Wave Attenuation in St 304 and Al 7075-T6” Published in Physic Research Journal, ISSN 1682 – 6957/10, 1016, j.precisioneng.2010.11.002, No. 1, Vol. 1, 2011, pp 47-54 (Persian Lan.)

13.  H. Razavi- M. J. Nategh, A. Abdullah, H. Soleimani Mehr, “An Investigation on the Kinematics of Tool-Workpieces Relative Movement in One-Directional Ultrasonic-Vibration Assisted Turning”, Published in Moddaress Mechanical Enginnering Journal, No. 11-1, Jan. 2012, pp 103-115 (Persian Lan.)

14.  B. Tajik, A. Abassi, M. Safaraval, A. Abdullah, M. Kazemi, H. Babaee, “Experimental Investigation of Heat Transfer enhancement by acoustic streaming in a closed cylindrical enclosure”, published in Scientific and Research Journal of Amirkabir University, No. 2, May 2012 (Persian Lan.)

 

Ø  Conference Papers Published Outside Iran

1.      Ali Asadi Lari, Mohammad Reza Ghazavi, Amir Abdullah “Wear in the liner of slider–crank mechanism” International congress on the Theory of Machines and Mechanisms, Technical University of Liberec, Department of Textile Machine Design, Sept. 1996 (Eng. Lan.)

2.      G. Sodeifian, A. Haghtalab, A. Abdullah “A High Shear Rate Sliding Plate Rheometer for Nonlinear Viscoelasticity” Proceedings of IMECE 2002: International Mechanical Conference and Exposition, Nov. 2002, New Orleans, USA (English Lan.)

3.      M.R. Shabgard, Atanas Ivanov, A. Abdullah, Andrew Rees “Influence of EDM Machining on surface Integrity of WC-Co” Conference of Paris-France, Nov. 2006 (English Lan.)

4.      A. Pak, A. Abdullah “Correct Predication of the Vibration Behavior of the High Power Ultrasonic Transducers by FEM Simulation” Proceedings of the 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, July 1-6, 2007 (English Lan.)

5.      S. Amini, H. Soleimanimehr, M.J. Nategh, A. Abdullah, M.H. Sadeghi “FEM Analysis of Ultrasonic-Vibration-Assisted Turning with Vibratory Tool” Proceedings of the 10th Advances in Materials and Processing Technologies Conference, Oct. 7-11. 2007, Daejeon, Korea (English Lan.)

6.      Modabberifar Mehdi,  Hojjat Yousef,   Abdullah Amir,   Dadkhah Mohammad “Identification of a Three Phase Panel Type Electrostatic Actuator” 15th International Conference on Mechatronics and Machine Vision in Practice, Auckland-New Zealand, Dec. 2-4, 2008

7.      A. Abdullah,   V. Fartashvand, A.R. Hajali Mohammadi, R. Abedini, “Ultrasonic Cleaning Parameters” International Conference on Advanced Manufacturing and Automation (INCAMA - 2009), Sponsored by CSIR, New Delhi-India, 2009/3/26-28

8.      A.   Abdullah,   M. Malaki, A. Pak, R. Abedini, “Finite Element Analysis of the vibration of a Piezolelctric high power ultrasonic transducer” Electronic Materials and Applications 2010, The American Ceramic Society and the American Ceramic Society’s Electronics Division and Basic Science Division, Florida-USA, 2010/1/20-22

9.      A. Farhadi, A. Abdullah, J. Zarkoob and A. Pak, “Analytical and Numerical Simulation of Ultrasonic Assisted Grinding”, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, Istanbul- Turkey, 2010/7/12-14

10.  Behnaz Tajic, Abbas Abbasi, Majid Saffar Avval, Amir Abdullah, “Numerical simulation of the influence of Bulk Temperature on Acoustic streaming of nonlinear ultrasonic wave in water inside a cylindrical  enclosure” 7th Int. Conference on Flow Dynamics, Sendai- Japan, Nov. 2010

11.  H. Ghafarirad, Seyed M. Rezaei, A. Abdullah, M. Zareinejad and M. Saadat, “Observer-Based Robust Control with Adaptive Perturbation Estimation for a Piezoelectric Actuator”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE 2010 (IMECE 2010-40167), Vancouver, British Columbia-Canada, 2010/11/12-18

12.  S. Skandari, B. Arezoo and A. Abdullah, “Thermal Errors Modeling of a CNC Machine’s Axis Using Neural Network and Fuzzy Logic”, The 2010 international Conference on Mechanical and Aerospace Engineering (ICMAE 2010), Kuala Lumpur-Malaysia, 2010/11/26-28

13.  G. Tahmasebipour, A. Abdullah, V. Ahmadi, Y. Hojjat, “Nano-EDM Process Modeling: Analysis of the Plasma Channel”, Nano-Thailand 2010, Bankok-Thailand, 2010

14.  H. Ghafarirad, Seyed M. Rezaei, M. Zareinejad and A. Abdullah, “Adaptive Robust Control for Micropositioning of Piezoelectric Actuators”, Proceedings of the 18th International Federation of Automatic Control (IFAC) –World Congress, Milano-Italy, 2011/08-09/28-02

 

Ø  Conference Papers Published Inside Iran

1.      A. Abdullah “Accuracy and Tests of Machine Tools” the 1st National Congress on the Development in Collaborations between Industries and Educational/Research Centers, Tabriz Univ., Tabriz-Iran, 5-7th July 1993 (Persian Lan.)

2.      A. Abdullah “CNC Machine Tools Advantages and Disadvantages” the 1st National Congress on the Development in Collaborations between Industries and Educational/Research Centers, Tabriz Univ., Tabriz-Iran, 5-7th July 1993 (Persian Lan.)

3.      A. Abdullah, M. Shadniya “A Comparison Between Performance Curves of AZ-60 ED-Machine with Isopulse System and DECKEL-DE20 and AZ-50 Machine with Isofrequency System” the 1st Production and Manufacturing Engineering Conference, Ministry of Heavy Industries of I-R-Iran, Amirkabir Univ., Tehran-Iran, Oct. 1993 (Persian Lan.)

4.      A. Abdullah “New Manufacturing Processes” the 1st Production and Manufacturing Engineering Conference, Ministry of Heavy Industries of I-R-Iran, Amirkabir Univ., Tehran-Iran, Oct. 1993 (Persian Lan.)

5.      A. Abdullah, M. Rezaie, M. H. kouklan “Metrology and Dimensional Quality Control of Gas Turbine Blade” the 3rd National Mech. Eng. Conf., Amirkabir University, May 1995 (Persian Lan.)

6.      A. Abdullah, M. Rezaie, M. H kouklan “Machining of Turbine Blade” the 3rd National Mech. Eng. Conf., Amirkabir University, May 1995 (Persian Lan.)

7.      Y. Hojjat, A. Abdullah, S. Attarsyedi “Micro-step Control” the 3rd National Mech. Eng. Conf., Amirkabir University, May 1995 (Persian Lan.)

8.      A. Abdullah, K. Mohaghegh “Electro-resistive Grinding, A New Approach for Machining Hard Materials” the 2nd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Jan. 1996 (Persian Lan.)

9.      A. Abdullah, K. Mohaghegh “Effect of Process Parameters on Machining Forces and Work piece Surface in Electro-resistive Grinding” the 2nd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Jan. 1996 (Persian Lan.)

10.  A. Abdullah, M. H. Kouklan “Laser Applications in Industry” the 2nd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Jan. 1996 (Persian Lan.)

11.  A. Abdullah, K. Mohaghegh “History of High Efficiency Deep Grinding” the 2nd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Jan. 1996 (Persian Lan.)

12.  A. Abdullah, A. Alinaghipour “Heat Treatment and Metallurgy of 2V-Permendure” the 3rd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Dec. 1996 (Persian Lan.)

13.  A. Abdullah, A. Alinaghipour “Heat Treatment and Magnetic Properties of 2V-Permendure” the 3rd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Dec. 1996 (Persian Lan.)

14.  A. Abdullah “Manufacturing Processes Trends” one day workshop, the 3rd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Jan. 1997 (Persian Lan.)

15.  A. Abdullah “Metrology Calibration and Standards” keynote speech, the 3rd Production and Manufacturing Engineering Conference, Amirkabir Univ., Tehran-Iran, Dec. 1996 (Persian Lan.)

16.  A. Abdullah, R. Eyvazi “Water Jet Cutting Process and Parameters” the 5th National Mech. Eng. Conf., Tabriz Univ., Iran, May 1997, (Persian Lan.)

17.  A. Abdullah, R. Mahdavinejad “Silicon Carbide Machining” 1st Refractory Materials Conference, Tehran Univ., Tehran-Iran, Jan. 1998 (Persian Lan.)

18.  M.R. Behzadipour, B. Arezo, A. Abdullah “Three Dimensional Static Modeling of effect of Fixture Auxiliary Supports on machined-surface flatness of elastic work piece” 5th International and 9th annual Mechanical Engineering Conference, Guilan University, Rasht-Iran, May 2001. (Persian Lan.)

19.  Amir Abdullah, Mohsen Bahrami, Yousef Hojjat, Mojtaba Ghodsi “Force Determination in Variable Reluctance Linear Stepper Motor Comparison of Analytical, Numerical and Experimental Results” 5th Manuf. Engineering Conference, 17th Feb. 2003 (English Lan.)

20.  D. Javabvar, G.H. Liaghat, A. Darvizeh, A. Abdullah “An Analytical Method for investigating forming process of cone” 5th Manuf. Engineering Conference, 17th Feb. 2003 (Persian Lan.)

21.  A. Abdullah, M. Koukabi M. Nosratkhah “Turbo-Charger Blade Manufacture using SiC” 5th Manuf. Engineering Conference, 17th Feb. 2003 (Persian Lan.)

22.  Amir Abdullah, Abbas Pak “Grinding wheel Redial Wear and Temperature Error in Creep-feed Grinding” 5th Manuf. Engineering Conference, 17th Feb. 2003 (Persian Lan.)

23.  Mahdi Shahsavari, Naser Fatoraie, Amir Abdullah “Design and Manufacture of a Grinding Machine for Surgical Blade Sharpening” 5th Manuf. Engineering Conference, 17th Feb. 2003 (Persian Lan.)

24.  H. Haghighat, M. H. Sadeghi, B. Arezo, A. Abdullah “A Solid Modeler Based Ball-end Milling Process Simulation” 5th Manuf. Engineering Conference, 17th Feb. 2003 (English Lan.)

25.  A. Abdullah, A. Pak, M. Farahi, M. Barzegari “Profile Wear of Resin-Bond Diamond Wheel and Roughness in Creep-Feed Grinding of Tungsten Carbide” 6th Manuf. Engineering Conference, 22nd – 24th Dec. 2003 (English Lan.)

26.  A. Abdullah, A. Pak, M. Farahi, M. Barzegari “Force and Specific Energy in Creep-Feed Grinding of Tungsten Carbide by using Resin–Bond Diamond wheel” 6th Manuf. Engineering Conference, 22nd – 24th Dec. 2003 (English Lan.)

27.  Y. Hojjat, M. Karimi, M. Bahrami, A. Abdullah, “Design and Manufacture of a linear DC Motor” 8th International Mechanical Engineering Conference, 19th – 21st May 2004, TehranIran (Persian Lan.)

28.  R. Salami, M.H. Sadeghi, A. Abdullah “Static Rigid Force Model for 3-Axis Ball-end Milling of Sculptured Surfaces”1st Tehran International Congress on Manufacturing Engineering, Tehran-Iran, December 12-15, 2005 (English Lan.)

29.  Amir Abdullah, Mohammad R. Shabgard “Effect of Ultrasonic Vibration of  Tool on Electrical Discharge Machining of Cemented Tungsten Carbide (WC-Co)” 1st Tehran International Congress on Manufacturing Engineering, Tehran-Iran, December 12-15, 2005 (English Lan.)

30.  Y. Hojjat, A. Abdullah, M. Sheikhi, S. Mohajerzade, Kh. Ghorlivand “Design and manufacturing of an ultra sensitive seismic sensor” 1st Tehran International Congress on Manufacturing Engineering, Tehran-Iran, December 12-15, 2005  (English Lan.)

31.  S. Amini, H. Zarepour, A. Abdullah, D. Shariari, M. Mehrara “Design, Manufacturing and Tests of 4000Bars Hydraulic Seals” 14th International Conference of Mechanical Engineering of I-R-Iran, Isfahan University of Technology, May 2006 (Persian Lan.)

32.  M. Farsi, A. Abdullah “Investigating the effect of Electro-chemical Engraving Parameters on Hardened materials” The 1st Conference of Metal Forming of the Iranian Society of Mechanical Engineers, Tehran, Iran, 27-28 Dec. 2006 (Persian Lan.)

33.  Ahmad Eskandari, Amir Abdullah, “Increase of Fatigue Strength of Welded Joints by Ultrasonic Peening”, 8th National Welding and Inspection Conference of Iran, Tehran-Iran, May 2007 (Persian Lan.)

34.  . Y. Hojjat, A. Abdullah, M.H. Ajdast “Theoretical and Practical Investigation of Beating in Liquids under Ultrasonic Wave Action and its Influence on the Surface of Aluminum Components” 15th  Annual Iranian Mechanical Engineering Conference, Amirkabir University of Technology, 15-17th May 2007 ( Persian Lan.)

35.  Amir Abdullah, Abbas Pak, Alireza Shahidi, “Equivalent Electrical Simulation of a High-Power Ultrasonic Piezoelectric Transducer by Using Finite Element Analysis” 15th  Annual Iranian Mechanical Engineering Conference, Amirkabir University of Technology, 15-17th May 2007 (English Lan.)

36.  E. Rohani, M.J. Nategh, A. Abdullah “Design and Optimization of Structure of an Electro-chemical Machine” 15th Annual Iranian Mechanical Engineering Conference, Amirkabir University of Technology, 15-17th May 2007 (Persian Lan.)

37.  H. Jalali Aghchai, A. Abdullah “Study and Testing of an Effective Adhesive used in Assembling the High Power Magnetostriction Ultrasonic Transducer” Tehran International Congress on Manufacturing Engineering (TICME 2007), Tehran-Iran, December 10-13, 2007 (Persian Lan.)

38.  Y. Hojjat, M. Modabberifar, A. Abdullah, M. Dadkhah, M. Hajimohammadi  “A Device for Particle Handling by an AC Electric Field and Statistical Analysis on Mean Linear Velocity of a Typical Ferrous Powder” Tehran International Congress on Manufacturing Engineering (TICME 2007), Tehran-Iran, December 10-13, 2007 (Persian Lan.)

39.  H. Jalali Aghchai, A. Abdullah “Design of an Equivalent Electrical Circuit for Magnetostriction Ultrasonic Transducer Based on its Equivalent Mechanical Circuit” Tehran International Congress on Manufacturing Engineering (TICME 2007), Tehran-Iran, December 10-13, 2007 (English Lan.)

40.  Modabberifar M., Hojjat Y., Abdullah A., Dadkhah M., Hajimohammadi M., “Design and manufacturing of a device for powder transportation by transient electrical wave” published in ICEE2008 conference (Iranian conference on electrical engineering), 2008 (Persian Lan.)

41.  Modabberifar M., Hojjat Y., Abdullah A., Dadkhah, “Powder Transportation by Transient Electric Wave” published in 1st Annual Conference of Petro-Chemisty of Iran IPC, 2008 (Persian Lan.)

42.  A. Abdullah, R. Abedini, V. Fartashvand, “Al6082 Welding Strength Processed by Ultrasonic Peening” published in 10th Manuf. Engineering Conference, Noshirvani University of Tech., Babol – Iran, Feb. 2010 (Persian Lan.)

43.  A. Abdullah, M. Malaki, “Damping in Ultrasonic Head Elements – Theoretical and Experimental Approach” published in 10th Manuf. Engineering Conference, Noshirvani University of Tech., Babol – Iran,  Feb. 2010 (Persian Lan.)

44.  H. Ghafari Rad, Seyed M. Rezaee, A. Abdullah, M. Zareie Negad, “Design of an Adaptive Visual Controller for Micrometer Positioning by Piezo-Electric Actuator” published in 10th Manuf. Engineering Conference, Noshirvani University of Tech., Babol – Iran,  Feb. 2010 (Persian Lan.)

45.  A.   Abdullah,  R. Abedini, A. Pak, “Design-Simulation and Manufacturing of a 1 kW Ultrasonic Transducer by Finite Element Method”, 18th Annual Iranian Mechanical Engineering Conference, ISME2010, Sharif University of Technology, Tehran, Iran, 10-12 May 2010

46.  M. Malaki, A.   Abdullah,  A. Pak, “Analytical Design of a High Power Ultrasonic Transducer with Considering Damping”, 18th Annual Iranian Mechanical Engineering Conference, ISME2010, Sharif University of Technology, Tehran, Iran, 10-12 May 2010

47.  S. Amini, M. J. Nategh, A. Abdullah, “Turing Assisted by Longitudinal Ultrasonic Vibration” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

48.  S. Amini, M. J. Nategh, A. Abdullah, “Low Carbon Steel Turning Assisted by Bending Ultrasonic Waves” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

49.  R. Sorie Solute, A. Abdullah, M. Malaki, “Design and Manufacturing of a Test System for Ultrasonic Wave Transmission in Pours Materials under ISO-Hydrostatic Pressure” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

50.  A. Abdullah, A. R. Hajali Mohammadi, A. Pak. S. Foroughi, “Design and Manufacture of Solid Matching Transducers for Ultrasonic Cleaning” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

51.  H. Ghafari Rad, Seyed M. Rezaee, A. Abdullah, M. Zareie Negad, “Design of Visual Sliding Mode Controller for Positioning of Piezo-Electric Actuator in Interaction with Surunding with External Force Estimation” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

52.  A. Abdullah, M. Sotoodeh Zadeh, R. Abedini, V. Fartashvand, “Ultrasonic Assisted Creep-Feed Grinding of Al7075” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

53.  A. Abdullah, M. Sotoodeh Zadeh, R. Abedini, V. Fartashvand, “Ultrasonic Effect on Tensile Strength of Al2024” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

54.  A. Abdullah, S. Foroughi, A. Pak, A. R. Hajali Mohammadi, “Finite Element Analyzes of Ultrasonic Transducers Array for Cleaning Purpose” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

55.  H. Abyar, A. Abdullah, J. Parvizian, A. R. Fadaee Tehrani, “Investigation of Corner Cutting Accuracy in WEDM and Relation between Corner Radius Error and Residual Layer” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

56.  A. Abdullah, N. Banimostafa Arab, M. Sohrabifard, M. Mahmoodi Nosheh, “Analytical Evaluation of Ultrasonic Assisted Deep Drawing” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

57.  A. Abdullah, E. Baghizadeh, M. Malaki, “Theoretical Analysis and Experimental Measurement of Cavitation Bubble Energy for Body Stone Breacking” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

58.  M. Malaki, A. Abdullah, “Nyquist Diagram Application in Extracting Modal Parameters of High Power Ultrasonic Head” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

59.  M. Shalvandi, A. Abdullah, A. Pak, “Improvement of Fatigue Strength of Welded Joints in Stainless Steel by Ultrasonic Peening” published in 11th Manuf. Engineering Conference, Tabriz- Iran, Oct. 2010 (Persian Lan.)

60.  G. Tahmasebipour, M. H. Ghajar and A. Abdullah, “Growth of Carbon Nanotube on STM Tungsten Nanotip”, International Congress on Nanoscience and Nanotechnology, Shiraz-Iran, 2010/11/9-11

61.  A. Abdullah, A. Pak, R. Abedini, “Design, Modelling and Fabrication of Ultrasonic Peening Tool Using FEM”, 1st  National Congress of Aging of Space Structures and Old and Worn Industrial Parts, Sharif University, Tehran-Iran, June. 2011

62.  M. Maleki, E. Baghizadeh, A. Abdullah, Z. Heidari, “Complications due to Extracorporeal Shock Wave Lithotripsy and Role of Cavitation Bubles Impacts”, Proceedings of the 17th Iranian Conference of Biomedical Engineering (ICBME2010), Isfahan-Iran, 2010/11/3-4

63.  M. Paknejad, A. Abdullah, A. Pak, S. Dashti, “Theoretical Analysis of Ultrasonic Assisted Indentation Forming of Tube”,  5th National Conference of Metals and Materials Forming, MATFORM'90, Sharif University, Tehran-Iran, Oct. 2011

64.  S. Dashti, A. Abdullah, A. Pak, M. Paknejad, “FEM Simulation of Ultrasonic Assisted Indentation Forming of Tube”, 5th National Conference of Metals and Materials Forming, MATFORM'90 , Sharif University, Tehran-Iran, Oct. 2011

65.  F. Bakhtiyari Nejad, A. Abdullah, V. Fartashvand, R. Abedini, “Vibro-acoustography a new technology of imaging based on Ultrasonic”, 1st International Conference on Acoustics and Vibration, ISAV 2011, Tehran, Iran, Dec. 2011

66.  B. Tajik, A. Abassi, M. Safaraval, A. Abdullah, “An Experimental Investigation of Heat Transfer Enhancement of Water by using Acoustic Waves Streamings”, 1st International Conference on Acoustics and Vibration, ISAV2011, Tehran, Iran, Dec. 2011

67.  M. Kazemi, A. Abdullah, I. Sattarifar, “Modeling of Ultrasonic Effects on Residual Stresses of Welding”, 1st International Conference on Acoustics and Vibration, ISAV 2011, Tehran, Iran, Dec. 2011

68.  S. Dashti, A. Abdullah, M. Paknejad, A. Pak, A. R. Mohammad Beigi, “Finite Element Analysis of Ultrasonic Vibration on Tube Indentation Forming”, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011), Tehran University, Tehran-Iran, Dec. 2011

69.  J. Jangorbaniyan, M. R. Razfar, A. Abdullah, “Tool Life in Ultrasonic Assisted Milling”, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011),  Tehran University, Tehran-Iran, Dec. 2011

70.  M. Kazemi, V. Shokri, H. Savadkohiyan, A. Abdulalah, I. Sattarifar, “Modeling of Ultrasonic Effects on Residual Stresses of Welding”, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011),  Tehran University, Tehran-Iran, Dec. 2011

71.  M. Paknejad, A. Abdullah, S. Dashti, A. Pak, A. R. Mohammad Beigi, “Theoretical-Experimental Analysis of Ultrasonic Assisted Tube Forming”, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011),  Tehran University, Tehran-Iran, Dec. 2011

72.  A. Pak, A. Abdullah ,“Modeling, Fabrication and Test of High power Ultrasonic Transducer with a Central Mass and Variable Resonance Frequency”, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011),  Tehran University, Tehran-Iran, Dec. 2011

73.  A. Abdullah, V. Tavakolkhah, R. Abedini, N. Parvin “Analytical Model for Hot Ti-6Al-4V Powder Compaction and comparison with Experimental Results”, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011),  Tehran University, Tehran-Iran, Dec. 2011

74.  V. Tavakolkhah, V. Fartashvan, A. Abdullah, Seyed A. Sadogh Vanini, “Mechanical Properties and Surface Quality of  Graphite-Polyethylene Composite produced by Friction-Agitation-Heat process”, Analytical Model for Hot Ti-6Al-4V Powder Compaction and comparison with Experimental Results”, 3rd International and 12th National Conference on Manufacturing Engineering (ICME 2011),  Tehran University, Tehran-Iran, Dec. 2011

75.  A. Eskandari, A. Abdullah, R. Abedini, “Experimental Reserch on Effects of Ultrasonic Waves on Quality and Strength of Welded Structures”, 12th National Conference on Welding and Inspection, Isfahan-Iran, Dec. 2011

76.  M. Ranjbari, A. Abdullah, “Recognition of Design Aspects and Geometric Errors in Turbine Vane Reverse Engineering”, 3rd Conference on Rotating Equipment in Oil & Power Industrie, Tehran-Iran, Jan. 2011

 

Written and published Educational Texts (All in Persian):

1.      “Heat Transfer in Condensation with Special Reference to Some Condensers” Ministry of Power of I-R-Iran, 1979 (90 Pages)

2.      “Heat Transfer in Boiling with Special Reference to Drum-Type and Benson Boilers” Ministry of Power of I-R-Iran, 1979 (80 Pages)

3.      “Thermodynamics of Steam Power Plants” Ministry of Power of I-R-Iran, 1979 (50 Pages)

4.      “Performance of Heat Exchangers” Ministry of Power of I-R-Iran, 1980 (50 Pages)

5.      “Steam Power-Plant Energy Balance” Ministry of Power of I-R-Iran, 1980 (50 Pages)

6.      “Steam Power Plant Pumps” Ministry of Power of I-R-Iran, 1980 (70 Pages)

7.      “Steam Turbines” Ministry of Power of I-R-Iran, 1980 (70 Pages)

8.      “Stacks, Blowers & Draft in Steam Power Plants” Ministry of Power of I-R-Iran, 1981 (70 Pages)

9.      “Pneumatic, Hydraulic and Mechanical Flight-Control Systems in Aircraft” I-R-Iran Aircraft Industries, 1982 (400 Pages)

10.  “Ultrasonic Machining, Theory and Applications” Tarbiat Modarres University, Tehran-Iran, 1992 (120 Pages)

11.  “Chemical Machining” Tarbiat Modarres University, Tehran-Iran, 1993 (80 Pages)

12.  “Modern Manufacturing Processes” Published by Mech. Eng. Dept. of Tabriz University, 1994 (400 Pages)

13.  “Electro-Chemical Machining, Theory and Applications” Tarbiat Modarres University, Tehran-Iran, 1996 (100 Pages)

14.  “Electrical-Discharge Machining, Theory and Applications” work in hand at the moment in English Language (Almost 550 Pages expected)

15.  “Standard of Quality Assurance for Metrology Equipment based on ISO 10012” Education and Research Studies Institute of Ministry of Industries of I-R-Iran, 1997 (80 Pages)

16.  “Testing Machine Tools” Tarbiat Modarres University, Tehran-Iran, 1999 (200 Pages)

 

 To my late Mother and Father

 

(Revised in 15th June 2012)