Abdolreza Ohadi,

Professor (B.Sc., M.Sc., Ph.D.)

Acoustics Research Lab.

Mechanical Engineering Department

Amirkabir University of Technology (Tehran Polytechnic)

424, Hafez Ave., Tehran 15916-34311, Iran, B.O.Box:15875-4413

Phone: +98-21-6454 3484

Fax: +98-21-6641 9736

Email: a_r_ohadi@aut.ac.ir

Homepage: http://me.aut.ac.ir/A.ohadi.htm

Date: September 2018

 

 

Abdolreza Ohadi                       

Personal

First Name: Abdolreza

Last Name: Ohadi Hamadani

Nationality: Iranian

P.B: Tehran

D.B: Sep. 1967

Education

Ph.D. in Mechanical Engineering            Sharif University of Technology,

                                                                   Tehran, Iran, January 2001.

(Thesis Title: Design, Analysis and Simulation of Active Noise Control (ANC) System)

M.Sc. in Mechanical Engineering            Amirkabir University of Technology,                                          

                                                                   Tehran, Iran, February 1994.

(Thesis Title: Coupled Thermoelasticity of Shells of Revolution)

B.Sc. in Mechanical Engineering             Amirkabir University of Technology,                                          

                                                                   Tehran, Iran, February 1991.

(Thesis Title: Preparation of  Computer Code for Designing Crane’s Elevator System)

Diploma in Mathematics and Physics      Alborz High-school

                                                                   Tehran, Iran, June 1985.

Research Interests

 

 Acoustics and Vibration (Acoustics Materials, Vibro-Acoustics, Isolation, Tire Noise, …)

 Active Noise and Vibration Control

 Condition Monitoring and Fault Detection of Rotating systems

 Structural Health Monitoring (SHM)

 Smart Materials

 Structural Dynamics

 Vehicle (Noise & Vibration, Structure, Engine Dynamics, …)

 Rotor Dynamics

 Computer Aided Engineering (CAE)

Responsibilities 

 

Dean of “Mechanical, Aerospace and Marine Engineering School”, Amirkabir University of Technology, July 2018- Present.

 

Director of Graduate Studies, Amirkabir University of Technology, June 2014- June 2018.

 

Head of Acoustics Research Lab., Mechanical Engineering Department, Amirkabir University of Technology, 2007- Present.

 

Head of “Measurement of Acoustical Properties of Materials” Lab., Central Laboratory, Amirkabir University of Technology, October 2012- Present.

 

Head of Mechatronics Group, Mechanical Engineering Department, Amirkabir University of Technology, December 2013- June 2014.

 

Head of Solid Mechanics Group, Mechanical Engineering Department, Amirkabir University of Technology, September 2010- November 2012.

 

Undergraduate Dean of Mechanical Engineering Department, Amirkabir University of Technology, August 2007-August 2009.

 

Deputy Dean of Automotive Engineering Department, Iran University of Science and Technology, September 2002-February 2004.

Academic Experience

 

Amirkabir University of Technology, Mech. Eng. Dept., Professor, 2016–Present.

Amirkabir University of Technology, Mech. Eng. Dept., Associate Professor, 2007–2016.

Amirkabir University of Technology, Mech. Eng. Dept., Assistant Professor, 2004–2007.

Iran University of Science and Technology, Automotive Eng. Dept., Assistant Professor, 2001-2004.

Sharif University of Technology, Mech. Eng. Dept., Adjunct Faculty, 2001-2003.

Toosi University of Technology, Mech. Eng. Dept., Adjunct Faculty, 2000-2001.

Sharif University of Technology, Mech. Eng. Dept., Teaching Assistant, 1995-2000.

Amirkabir University of Technology, Mech. Eng. Dept., Teaching Assistant,1990-1992.

Courses Taught

 

 Undergraduate

Vibrations (current course)

Dynamics I

Dynamics II

Dynamics of Machinery 

Design of Mechanisms (current course)

Strength of  Materials

Statics

Strength of Materials Lab

Dynamics and Vibrations Lab

 Graduate

Advanced Acoustics

Vibrations of Continuous Systems (current course)

Finite Element Methods

System Dynamics

Structural Dynamics

Modern Control

Mechatronics

Design & Analysis of the Vehicle’s Body Structure

Impact Mechanics in Vehicle’s Body Structure

Vibration and Acoustics of Vehicle

 

 

Professional Experience

 Saipa Kashan

Tehran, Iran-  2009-2011

 Consultant of Saipa Kashan.

 Iran Khodro Axle Manufacturing Company (IKAMCO)

        Tehran, Iran-  2002-2004

 Consultant of Axle Research Center.

 Saipa Automotive Research and Innovation Center(AIRIC)

Tehran, Iran-  1994-2002

 Manager of Advanced Vibration and Acoustic (NVH) Laboratory Site.

 Head of CAE (Computer Aided Eng.) Dept.

 

Industry Related Projects

 

 

 

National Emission Inventory- Karaj City, Present.

Standardization of Tire Noise Tests, Present.

Health Monitoring and Inspection of Wind Turbine Blades through Mobile Robot, Present.

Compilation of Technical and Economic Specifications of the Full Hybrid Vehicle, 2016.

Design and Prototyping of New Engine for Iranian National Platform of Vehicle Class B, 2017.

Development of Technical Knowledge of Tire Noise, 2015.

Shock and Vibration Reduction of Optronic system, 2015.

Design, Construction and Test of Shock Isolators for Sensitive Electronic Devices, 2013.

Design and Construction of Smart Squeeze Film Damper Containing Magneto-Rheologic Fluid, 2013.

Fault Detection of Gearbox Using Vibration Signals and Artificial Intelligence, 2011.

Design and Analysis of the Special Purpose Vehicle’s Body Structure-Class ¾ Ton, 2008.

Structural Optimization of the Caliper’s Carrier of the Peugeot 405 Brake System, 2007.

Redesign of the Stabilized Column Due to the Catastrophic Failure, 2006.

Design and Analysis of the Special Purpose Vehicle’s Body Structure-Class ¼ Ton, 2005.

Advanced Technologies of Vehicle’s Body (Future Trend), 2005.

Finite Element Analysis (Static, Normal Mode) of a Supporting Structure, 2004.

Finite Element Analysis (Static, Normal Mode) of a Turning Table, 2004.

Finite Element Analysis (Static, Normal Mode and Thermal) of a Nozzle, 2003.

Static, Dynamic and Thermal Analysis of a Turbine, 2002.

Finite Element Analysis (Static, Buckling and Normal Mode) of a Flow Valve, 2002.

Vibration Analysis of a Heavy Duty Vehicle, 2002.

Advanced Technologies of Vehicle’s Body (Future Trend), 2001.

Management of the Project “Construction of the Semi-Anechoic Vehicle Noise Test Chamber”, 2001.

Management of the project “Design and Construction of the Torsion and Bending Test Rig for Vehicle’s Body”, 2000.

Redesign of the Distillation Tower to Bear New Function, 2000.

Redesign of the Distillation Tower Due to Catastrophic Failure, 1997.

 

Workshops and Professional Courses

 

 

Vibration Analysis – Level I

Vibration Analysis – Level II

Vibrating Condition Monitoring

Basic Concepts of Sound Control

Finite Element Method for Engineering Applications.

Advanced Technologies of Vehicle’s Body.

Modal Analysis and Test.

 

 

Publications

 

 Journal Papers

 

Iman Falsafi and Abdolreza Ohadi, “Optimization of Multistep Cavity Configuration to Extend Absorption Bandwidth of Micro Perforated Panel Absorber”, Archives of Acoustics,

Mostafa Asadi Khanouki and Abdolreza Ohadi, “Improved Acoustic Damping in Polyurethane Foams by the Inclusion of Silicon Dioxide Nanoparticles”, Advances in Polymer Technology,

Seyed Mohammad Sabet, Reza Keshavarz, and Abdolreza Ohadi, “Sound Isolation Properties of Polycarbonate/Clay and Polycarbonate/Silica Nanocomposites”, Iranian Polymer Journal,

Milad Khodabandeh, Maryam Ghassabzadeh Saryazdi, and Abdolreza Ohadi, “Fixture’s Clamp Layout Optimization for Sheet Metal with Initial Variation Based on Ant Colony Algorithm”, Modares Mechanical Engineering, (in Persian)

Abolfazl Hasani Baferani and Abdolreza Ohadi, “Analytical Investigation of the Acoustic Behavior of Nanocomposite Porous Media by using Modified Nonlocal Biot’s Equations”, Journal of Vibration and Control,

Abolfazl Hasani Baferani, Reza Keshavarz, Mostafa Asadi and Abdolreza Ohadi, “Effects of Silicone Surfactant on the Properties of Open-Cell Flexible Polyurethane Foams”, Advances in Polymer Technology,

Reza Keshavarz and Abdolreza Ohadi, “A New Analytical Approach for the Modeling of Sound Propagation in the Stratified Medium”, Applied Mathematical Modeling,

Rahime Naseri, Abdolreza Ohadi, Vahid Fakhari and Heidar Ali Talebi, “Optimal Characteristics Determination of Engine Mounting System Using TRA mode Decoupling with Emphasis on Frequency Responses”, Journal of Theoretical and Applied Vibration and Acoustics (TAVA),

Ali Kamalie Egoli, Abdolreza Ohadi, and Milad Kazemi Mehrabadi, “A Magnetorheological Fluid Damper for Robust Vibration Control of Flexible Rotor Bearing System: A Comparison Between Sliding Mode and Fuzzy Approaches”, Journal of Theoretical and Applied Vibration and Acoustics (TAVA),

Iman Falsafi and Abdolreza Ohadi, “Design Guide of Single Layer Micro Perforated Panel Absorber with Uniform Air Gap”, Applied Acoustics,

Amir Hosein Zamanian and Abdolreza Ohadi, “Application of Energies of Optimal Frequency Bands for Fault Diagnosis Based on Modified Distance Function”, Journal of Mechanical Science and Technology,

Mostafa Irannejad and Abdolreza Ohadi, “Vibration Analysis of a Rotor Supported on Magnetorheological Squeeze Film Damper with Short Bearing Approximation: A contrast Between Short and Long Bearing Approximations”, Journal of Vibration and Control,

Amirashkan Mokhtari, Abdolreza Ohadi, and Hamidreza Amindavar “Polygonal Damage Shape Reconstruction in Plates using Guided Lamb Wave”, Structural Control Health Monitoring,

Abolfazl Hasani Baferani, Ali Akbar Katbab, and Abdolreza Ohadi, “The Role of Sonication Time upon Acoustic Wave Absorption Efficiency, Microstructure, and Viscoelastic Behavior of Flexible Polyurethane/CNT Nanocomposite Foam”, European Polymer Journal,

Abolfazl Hasani Baferani, Reza Keshavarz, and Abdolreza Ohadi “Toward Mechanistic Understanding of the Relationship Between the Sound Absorption and the Natural and Resonant Frequencies of Porous Media”, Journal of Acoustical Society of America,

Ebrahim Sadeghpour, Majtaba Sadighi, and Abdolreza Ohadi, “Free Vibration Analysis of a Debonded Curved Sandwich Beam, European Journal of Mechanics – A/Solid,

Ameneh Maghsoodi, Abdolreza Ohadi, Mojtaba Sadighi, and Hamidreza Amindavar, “Damage Detection in Multilayered Fiber–Metal Laminates using Guided-Wave Phased Array”, Journal of Mechanical Science and Technology,

Seyed Mohammad Sabet and Abdolreza Ohadi, “Experimental and Theoretical Investigation of Sound Transmission Loss for Polycarbonate, Poly (Methyl methacrylate), and Glass”, Journal of Applied Polymer Science,

Mostafa Asadi, Abdolreza Ohadi and Reza Keshavarz, “Effect of Non-Acoustic Properties on the Sound Absorption of Polyurethane Foams”, Journal of Theoretical and Applied Vibration and Acoustics (TAVA),

Alireza Seyed Kanani and Abdolreza Ohadi, “Robust Identification of Smart Foam Using Set Membership Estimation in a Model Error Modelling Framework”, Journal of Theoretical and Applied Vibration and Acoustics (TAVA),

Vahid Fakhari, Abdolreza Ohadi and Heidar Ali Talebi, “A Robust Adaptive Control Scheme for Active Mount Using a Dynamic Engine Model”, Journal of Vibration and Control,

Abolfazl Hasani Baferani and Abdolreza Ohadi, “Analytical Solution of Biot’s Equations Based on Potential Functions Method”, Trans. of ASME, Journal of Vibration and Acoustics, Vol. 137, Issue 5, June 2015.

Amirashkan Mokhtari, Abdolreza Ohadi, and Hamidreza Amindavar, “Reconstructing the Damage Shape in Aluminum Plate using Guided  Lamb  Wave and Polygon Reconstruction Technique in Tomography”, Modares Mechanical Engineering, (in Persian)

Mohsen Aliabadi, Rostam Golmohammadi, Abdolreza Ohadi, Muharram Mansoorizadeh, Hassan Khotanlou and Mohammad Saber Sarrafzadeh, “Development of an Empirical Acoustic Model for Predicting Reverberation Time in Typical Industrial Workrooms Using Artificial Neural Networks”, Acta Acoustica united with Acoustica,

Mir Alireza Seyed Kanani, Hamed Niknam, Abdolreza Ohadi and Mohammad Mohammadi Aghdam, Effect of Nonlinear Elastic foundation on Large Amplitude Free and Forced Vibration of Functionally Graded Beam, Composite Structures,

Ameneh Maghsoodi, Abdolreza Ohadi and Mojtaba Sadighi,Calculation of Wave Dispersion Curves in Multilayered Composite-Metal Plates, Shock and Vibration, Vol. 2014, Article ID 410514, 2014.

Hojat Heidari Bafroui and Abdolreza Ohadi,Application of Wavelet Energy and Shannon Entropy for Feature Extraction in Gearbox Fault Detection Under Varying Speed Condition”, Neurocomputing, Vol. 133, 433-475, June 2014.

Mohammad Hassan Gharavian, Farshad Almas Ganj, Abdolreza Ohadi and Hojjat Heidari Bafroui, “Comparison of FDA-based and PCA-based features in fault diagnosis of Automobile Gearboxes, Neurocomputing, Vol. 121, 150-159, December 2013.

Naser Elmi, Abdolreza Ohadi and Behzad Samadi, “Active Front Steering Control of a Sport Utility Vehicle a Robust Linear Quadratic Regular Method, with Emphasis on the Roll Dynamics, Proc IMechE Part D: Journal of Automobile Engineering, Vol. 227, No. 2, 1636-1649, December 2013.

Masoud Hemmatian and Abdolreza Ohadi, “Sliding Mode Control of Flexible Rotor Based on Estimated Model of Magneto-Rheological Squeeze Film Damper., Trans. of ASME, Journal of Vibration and Acoustics, Vol. 135, Issue 5, October 2013.

Rostam Golmohammadi, Mohsen Aliabadi and Abdolreza Ohadi,Empirical Comparison of the in Situ Methods for Determining Sound Power of Typical Embroidery Machine Located in Industrial Workroom”, International Journal of Occupational Hygiene, Vol. 74, No. 3, 89-95, 2013.

Mohsen Aliabadi, Rostam Golmohammadi, Moharram Mansourizadeh, Hassan Khotanlou and Abdolreza Ohadi, “An Empirical Technique for Predicting Noise Exposure Level in the Typical Embroidery Workrooms using Artificial Neural Networks”, Applied Acoustics, Vol. 74, 364-374, 2013.

Vahid Dabbagh, Reza Keshavarz and Abdolreza Ohadi, “Accurate Designing of Flat-walled Multi-layered Lining System Using Genetic Algorithm for Application in Anechoic Chambers”, Advanced Materials Research, Vols. 655-657, 158-168, 2013.

Reza Keshavarz and Abdolreza Ohadi, “Effects of Compression on Sound Absorption of Transversely Isotropic Fibrous Materials at Oblique Incidence”, Applied Acoustics, Vol. 74, 383-395, 2013.

Vahid Fakhari and Abdolreza Ohadi, “Robust Control of Automotive Engine using Active Engine Mount”, Journal of Vibration and Control, Vol. 19, No. 7, 1024-1050, May 2013.

Seyed Mohammad Hadi Sadati, Mahyar Naraghi and Abdolreza Ohadi, Optimum Design, Manufacturing and Experiment of a Passive Walking Biped: Effects of Structural Parameters on Efficiency, Stability and Robustness on Uneven Trains, Modares Mechanical Engineering, Issue 6, 52-68, 2013 (in Persian).

Javad Ahmadi, Ali Khaki-Sedigh and Abdolreza Ohadi, “Robustification of Input Redundant Feedback Systems using Robust Actuator Weighting in the Control Allocation”, International Journal of Control, Available online, Vol.85, Issue 9, 1380-1400, 2012.

Navid Azadi and Abdolreza Ohadi,Filtered Gradient Active Fuzzy Neural Network Noise Control in an Enclosure Backed by a Clamped Plate”, International Journal of Adaptive Control and Signal Processing, Vol.26, Issue 5, 451-468, May 2012.

Hamed Ghaednia and Abdolreza Ohadi, “Vibration Behavior of Flexible Rotor System Mounted on MR Squeeze Film Damper with Thermal Growth Effect, Trans. of ASME, Journal of Vibration and Acoustics, Vol. 134, Issue 1, February 2012.

Vahid Tajeddini and Abdolreza Ohadi, “Three- Dimensional Vibration Analysis of Functionally Graded Thick, Annular Plates with Variable Thickness via Polynomial-Ritz Method”, Journal of Vibration and Control, Vol. 18, No.11, October 2012.

Amir Hosein Zamanian and Abdolreza Ohadi,Gear Fault Diagnosis Based on Gaussian Correlation of Vibrations Signals and Wavelet Coefficients”, Applied Soft Computing, Vol. 11, Issue 8, 4807-4819, December 2011.

Javad Ahmadi, Abdolreza Ohadi, and Mansour Kabganian “Lyapunov-based Utilization of Optimal Tire Friction Forces Considering Saturation Limits for Vehicle Lateral-plane Motion Control, Trans. of ISME, Journal of Mechanical Engineering, Accepted for Publication.

Soroush Sadeghnejad, Mojtaba Sadighi, and Abdolreza Ohadi, “Free Vibration Analysis of Composite Sandwich Plate with Viscoelastic Core, Journal of Key Engineering Materials, Vols. 471-472, 658-663, 2011.

Yadollah Rasekhipour and Abdolreza OhadiA Study on Performance of Simplified Vehicle Models in Optimization of Hydraulic Engine Mounts in Comparison with Full-Vehicle Model, International Journal of Automotive Engineering, Vol. 1, No. 2, 10-15, 2011.

Vahid Fakhari, Abdolreza Ohadi, and Payman Yousefian,Nonlinear Free and Forced Vibration Behavior of Functionally Graded Plate with Piezoelectric Layers in Thermal Environment”, Composite Structures, Vol. 93, Issue 9, 2310-2321, August 2011.

Mahdi Saeidifar and Abdolreza Ohadi, “Bending Vibration and Buckling of Non-Uniform Plate with Time-Dependent Boundary Conditions”, Journal of Vibration and Control, Vol. 17, 1371-1393, August 2011.

Vahid Tajeddini, Abdolreza Ohadi and Mojtaba Sadighi,Three-dimensional Free Vibration of Variable Thickness Thick Circular and Annular Isotropic and Functionally Graded Plates on Pasternak Foundation”, International Journal of Mechanical Sciences, Vol. 53, Issue 4, 300-308, April 2011.

Vahid Fakhari and Abdolreza Ohadi, “Nonlinear Vibration Control of Functionally Graded Plate with Piezoelectric Layers in Thermal Environment”, Journal of Vibration and Control, Vol. 17, 449-469, March 2011.

Arvin, H., Sadighi, M. and Ohadi, A.R.,A Numerical Study of Free and Forced Vibration of Composite Sandwich Beam with Viscoelastic Core”, Composite Structures, Vol. 92, Issue 4, 996-1008, March 2010.

Ohadi, A.R. and Maghsoodi, G., “Simulation of Engine Vibration on Nonlinear Hydraulic Engine Mounts”, Trans. of ASME, Journal of Vibration and Acoustics, Vol. 129, 417-424, August 2007.

Ohadi, A.R. and Moghaddami, M., “Investigating the Effects of Fibrous Material Compression on the Acoustical Behavior of Absorption and Barrier Materials”, Trans. of ASME, Journal of Vibration and Acoustics, Vol. 129, 133-140, April 2007.

Ohadi, A.R. and Moghaddami, M., “Optimization of Acoustical Behavior of Sound Absorptions Based on Finite Element Modeling”, SAE 2005 Transactions, Journal of Commercial Vehicle, Vol. 114 (2), 246-254, 2005.

Esmailzadeh, E., Ohadi, A.R. and Alasty, A., “Multi-channel Adaptive Feedforward Control of Noise in an Acoustic Duct”, Trans. of ASME, Journal of Dynamic Systems, Measurement and Control, Vol.126, 406-415, June 2004.

Esmailzadeh, E., Alasty, A. and Ohadi, A.R., “Hybrid Active Noise Control of a One-Dimensional Acoustic Duct”, Trans. of ASME, Journal of Vibration and Acoustic, Vol.124, 10-18, January,2002.

Esmailzadeh, E. and Ohadi, A.R. , “Design Aspects for Feedforward Multiple-Input Active Noise Controller”, Iranian Journal of Science and Technology, Transaction B, Vol.26, No. B3, 407-418, 2002.

Esmailzadeh, E. and Ohadi, A.R., “Vibration and Stability Analysis of Non-uniform Timoshenko Beams under Axial and Distributed Tangential Loads”, Journal of Sound and Vibration, Vol.236 (3), 443-456, 2000.

Eslami, M.R., Shakeri, M., Ohadi, A.R. and Shiari, B., “Coupled Thermoelasticity of Shells of Revolution: Effect of Normal Stress and Coupling”, AIAA Journal, Vol.37, No.4, April 1999.

Esmailzadeh, E., Ghorashi, M. and Ohadi, A.R., “Analysis of Preloaded Bolted Joints Under Exponentially Decaying Pressure”, Trans. of ASME, Journal of Pressure Vessel Technology, Vol.118, November, 1996.

Esmailzadeh, E. and Ohadi, A.R., “Longitudinal and Transversal Vibration Response of Beams by Statistical Energy Analysis (SAE)”, Estegllal Journal of Engineering, Vol.17, No.1, 1998- (in Persian).

Esmailzadeh, E. and  Ohadi, A.R. , “Exact Solution of Transversal Vibration of a Non-Uniform beam under Axial Loading”, Amirkabir Journal of Science and Technology, Vol.9, No.36, 1998- (in Persian).

 

 Conference Papers

 

Abolfazl Hasani Baferani and Abdolreza Ohadi, “Verification of Modified Biot’s Equations with Experimental Results for Modelling of Nanocomposite Porous Material”, Proceedings, The Seventh International Conference on Acoustics and Vibration (ISAV2017), Sharif University of Technology, Tehran, Iran, November 28-29, 2017 (in Persian).

Hossein Hosseinkhani and Abdolreza Ohadi, “Automobile Gearbox Compound Faults Detection Based on Empirical Wavelet Transform Method”, Proceedings, The Seventh International Conference on Acoustics and Vibration (ISAV2017), Sharif University of Technology, Tehran, Iran, November 28-29, 2017.

Anahita Habibian, Yalda Aslani, Rasool Fesharaki Fard, Abdolreza Ohadi, and Hamed Ghaffari Rad, “Structural and Dynamic Analysis of a Wheeled Mobile Robot with Different Wheel Configurations”, Proceedings, The 5th International Conference on Robotics and Mechatronics (ICROM 2017), Amirkabir University of Technology, Tehran, Iran, October 25-27, 2017.

Ebrahim Karimi, Maryam Ghasabzadeh Saryazdi, and Abdolreza Ohadi, “Design of Continuously Variable Valve Lift Mechanism for an Internal Combustion Engine”, Proceedings, The 25th Annual International Mechanical Engineering Conference (ISME2017), Tarbiat Modares University, Tehran, Iran, May 2-4, 2017 (in Persian).

Seyed Mohammad Mir Amini and Abdolreza Ohadi, “Vibration and Dynamic Analysis of Laminated Cylindrical Composite Shells Containing Incompressible Flowing Fluid”, Proceedings, The Sixth International Conference on Acoustics and Vibration (ISAV2016), KNT University of Technology, Tehran, Iran, December 7-8, 2016 (in Persian).

Somayeh Mohammadi, Reza Kheshavarz, and Abdolreza Ohadi, “Removing Balancing Shaft of Three-Cylinder Engines with Optimization of Counterweights Layout”, Proceedings, The Sixth International Conference on Acoustics and Vibration (ISAV2016), KNT University of Technology, Tehran, Iran, December 7-8, 2016.

Milad Kazemi Mehrabadi, Abdolreza Ohadi, and Ali Kamalie Egoli, “A Magnetorheological Fluid Damper for Vibration Control of Flexible Rotor Bearing System”, Proceedings, The Fifth International Conference on Acoustics and Vibration (ISAV2015), University of Tehran, Tehran, Iran, November 25-26, 2015.

Behnam Sheikh Shoaeei, Maryam Ghasabzadeh Saryazdi, and Abdolreza Ohadi, and Vahid Fakhari, “Modeling and Dynamic Simulation of Valve Chain of EF7 Internal Combustion Engine”, Proceedings, The Fifth International Conference on Acoustics and Vibration (ISAV2015), University of Tehran, Tehran, Iran, November 25-26, 2015.

Rahime Naseri, Abdolreza Ohadi, Vahid Fakhari and Heidar Ali Talebi, “Optimization of Engine Mount Characteristics Based on TRA Mode Decoupling”, Proceedings, The Fifth International Conference on Acoustics and Vibration (ISAV2015), University of Tehran, Tehran, Iran, November 25-26, 2015.

Fatemeh Seidabadi, Milad Mehranpour, and Abdolreza Ohadi, “Effect of the Carbonyl Iron Particles on Damping Properties of Magnetorheological Elastomers Based on Natural Rubber”, API Conference Proceedings 1779, Regional Conference Graz Polymer Processing Society PPS, Gras, Austria, September 21-25, 2015.

Iman Falsafi and Abdolreza Ohadi, “Improving Absorption Bandwidth of Micr-perforated Panel by Stepping the Cavity”, Proceedings, The 22nd International Congress on Sound and Vibration (ICSV22), Florence, Italy July 12-16, 2015.

Mostafa Asadi Khanouki and Abdolreza Ohadi, “Improving Sound Absorption of Polyurethane Foams by the Incorporation of Nano-Particles”, Proceedings, The 22nd International Congress on Sound and Vibration (ICSV22), Florence, Italy July 12-16, 2015.

Alireza Seyed Kanani, Abdolreza Ohadi, and Mohammad Zarenezhad, “Observations on Frequency Response and Nonlinearilties of Acoustical Bahaviour of Smart Foam Actuators”, Proceedings, The 22nd International Congress on Sound and Vibration (ICSV22), Florence, Italy July 12-16, 2015.

Seyed Mohammad Sabet and Abdolreza Ohadi, “Sound Transmission Loss Comparison for Compression Molded Polycarbonate and PMMA”, Proceedings, The 22nd International Congress on Sound and Vibration (ICSV22), Florence, Italy July 12-16, 2015.

Mostafa Asadi Khanouki, Abdolreza Ohadi, and Reza Kheshavarz, “Effect of Non-Acoustic Properties on the Sound Absorption of Polyurethane Foams”, Proceedings, The Fourth International Conference on Acoustics and Vibration (ISAV2014), Iran University of Science and Technology, Tehran, Iran, December 10-11, 2014.

Alireza Seyed Kanani and Abdolreza Ohadi, “Robust Identification of Smart Foam using Set Membership Estimation in a Model Error Modeling Framework”, Proceedings, The Fourth International Conference on Acoustics and Vibration (ISAV2014), Iran University of Science and Technology, Tehran, Iran, December 10-11, 2014.

Mohsen Lotfi and Abdolreza Ohadi, “Effect of Compression on Sound Transmission Loss Factor of Aluminum Sandwich Panel with Isotropic Porous Core in Normal Incidence”, Proceedings, The Fourth International Conference on Acoustics and Vibration (ISAV2014), Iran University of Science and Technology, Tehran, Iran, December 10-11, 2014 (in Persian).

Mohammad Saber Nemati, Abdolreza Ohadi, Hamidreza Amindavar and Hojjat Heidari Bafroui, “Performance Comparison of Various Decision-Based Neural Networks in Gearbox Fault Diagnosis”, Proceedings, The Bi-annual International Conference on Experimental Solid Mechanics (X-Mech-2014), Iran University of Science and Technology, Tehran, Iran, February 19-20, 2014.

Mostafa Irannejad Parizi and Abdolreza Ohadi, “Vibration Analysis of a Rotor-Bearing System Supported on Magnetorheological Squeeze Film Dampers with Short-Bearing Assumption”, Proceedings, The Third International Conference on Acoustics and Vibration (ISAV2013), KNT University of Technology, Tehran, Iran, December 25-26, 2013.

Shahrzad Mirhosseini, Mojtaba Sadighi and Abdolreza Ohadi, “Transverse Vibration of Composite Beams with Two Non-overlapping Delaminations using DTM”, Proceedings, The Third International Conference on Acoustics and Vibration (ISAV2013), KNT University of Technology, Tehran, Iran, December 25-26, 2013.

Zahra Ghasemi and Abdolreza Ohadi, “Nonlinear Active Noise Control Based on Virtual Sensing Technique in an Enclosure with a Flexible Panel”, Proceedings, The Third International Conference on Acoustics and Vibration (ISAV2013), KNT University of Technology, Tehran, Iran, December 25-26, 2013.

Hooman Tavasoli, Abdolreza Ohadi and Mahnaz Shamshirsaz, “Notch Detection with Circumferential Distribution in Pipe using Ultrasonic Wave and Wavelet Transformation”, Proceedings, The Third International Conference on Acoustics and Vibration (ISAV2013), KNT University of Technology, Tehran, Iran, December 25-26, 2013 (in Persian).

Seyed Shamir Shojaeei and Abdolreza Ohadi, “Hybrid Active Noise Reduction Headset Based on Fixed Point Processors”, Proceedings, The 21st Annual International Mechanical Engineering Conference (ISME2013), KNT University of Technology, Tehran, Iran, May 7-9, 2013.

Ameneh Maghsoodi, Abdolreza Ohadi and Mojtaba Sadighi,Calculation of Wave Dispersion Curves in Multi-layered Composite-metal Plates, Proceedings, The Second International Conference on Acoustics and Vibration (ISAV2012), Sharif University of Technology, Tehran, Iran, December 26-27, 2012.

Mohammad Hossein Gharavian, Abdolreza Ohadi, Hamid reza Amindavar and Babak Sakhaei,Fault Diagnosis of Internal Combustion Engine Valve Train Based on Hypothesis Tests, Proceedings, The Second International Conference on Acoustics and Vibration (ISAV2012), Sharif University of Technology, Tehran, Iran, December 26-27, 2012.

Abulfazl Hasani Baferani and Abdolreza Ohadi,Effect of In-Plane Loads on Natural Frequency of Transversely Isotropic Thick Annular Sector Plate, Proceedings, The Second International Conference on Acoustics and Vibration (ISAV2012), Sharif University of Technology, Tehran, Iran, December 26-27, 2012.

Vahid Dabbagh, Reza Keshavarz, and Abdolreza Ohadi,Accurate Designing of Flat-walled Multi-Layered Lining System using Genetic Algorithm for Application in Anechoic Chambers, Proceedings, The 41st International Congress and Exposition on Noise Control Engineering (Inter-noise 2012), NewYork, USA, August 19-21, 2012.

Masoud Hemmatian and Abdolreza Ohadi,Sliding Mode Control of Flexible Rotor using Magneto Rheological Squeeze Film Damper, Proceedings, The ASME 2012 International Design Engineering Technical Conferences (IDETC2012), Chicago, IL, USA, August 12-15, 2012.

Hojat Heidari and Abdolreza Ohadi,Fault Detection in Gearbox with Non-Stationary Rotational Speed using CWT Feature Extraction, PCA Reduction and ANN Classifier Methods, Proceedings, The ASME 2012 International Design Engineering Technical Conferences (IDETC2012), Chicago, IL, USA, August 12-15, 2012.

Soroush Sadeghnejad, Mojtaba Sadighi, and Abdolreza Ohadi, “An Extended Higher-order Free Vibration Analysis of Composite Sandwich Beam with Viscoelastic Core”, Proceedings, The 11th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2012), Nantes, France, July 2-4, 2012.

Mostafa Irannejad Parizi, Hojat Heidari and Abdolreza Ohadi “Fault Detection in SAMAND Gearbox based on Analysis of Vibration Signal using Empirical Mode Decomposition (EMD) Method”, Proceedings, The 6th Annual Conference on Condition Monitoring and Fault Diagnostic (CMFD2012), Sharif University of Technology, Tehran, March **, 2012 (in Persian).

Yadollah Rasekhipour and Abdolreza Ohadi,Evaluating Vibration Performance of a Semi-active MR Engine Mount, Proceedings, The 2nd International Conference on Control, Instrumentation, and Automation (ICCIA2011), Shiraz, Iran, December 27-29, 2011.

Naser Elmi, Behzad Samadi and and Abdolreza Ohadi,Handling Safety Improvement for Steer-By-Wire Vehicle Using Fuzzy Controller, Proceedings, The 2nd International Conference on Control, Instrumentation, and Automation (ICCIA2011), Shiraz, Iran, December 27-29, 2011.

Masoud Hemmatian and Abdolreza Ohadi,Vibration Analysis of Flexible Rotor System with Magneto-Rheological Squeeze Film Damper using Estimated Stiffness Matrix, Proceedings, The First International Conference on Acoustics and Vibration (ISAV2011), Amirkabir University of Technology, Tehran, Iran, December 21-22, 2011.

Hojjat Heidari and Abdolreza Ohadi,Application of Continues Wavelet Transform and Neural Network in Gearbox Fault Detection under Varying Speed Condition, Proceedings, The First International Conference on Acoustics and Vibration (ISAV2011), Amirkabir University of Technology, Tehran, Iran, December 21-22, 2011.

Parizad Karbasi and Abdolreza Ohadi,Active Control of Environmental Noise using Fast Filtered-X Affine Projection Algorithm, Proceedings, The First International Conference on Acoustics and Vibration (ISAV2011), Amirkabir University of Technology, Tehran, Iran, December 21-22, 2011.

Navid Azadi and Abdolreza Ohadi, “Enhanced Multi-Channel Active Fuzzy Neural Network Noise Control in an Enclosure”, Proceedings, Word Engineering Congress 2011 (WCE2011)/ The 2011 International Conference of Mechanical Engineering (ICME’11), Imperial College, London, United Kingdom, July 5-8, 2011.

Yadollah Rasekhipour and Abdolreza Ohadi,Optimization of Hydraulic Engine Mounts through Simplified and Full Vehicle Models, Proceedings, Word Engineering Congress 2011 (WCE2011)/ The 2011 International Conference of Mechanical Engineering (ICME’11), Imperial College, London, United Kingdom, July 5-8, 2011.

Soroush Sadeghnejad, Mojtaba Sadighi, and Abdolreza Ohadi, “Free Vibration Analysis of Composite Sandwich Plate with Viscoelastic Core, Proceedings, The Eighth International Conference on Composite Science and Technology (ICCST8), Kuala Lumpur, Malaysia, March 22-24, 2011.

Jalali, M., Ohadi, A.R.,Optimal Placement of Sensors and Actuators in Cluster Control of Acoustic Potential Energy in a Cavity, Proceedings, 2010 ASME International Mechanical Engineering Congress and Exposition (IMECE2010), Vancouver, British Columbia, Canada, November 12-18, 2010.

Ghaednia, H., Ohadi, A.R., “Effect of Thermal Growth on Vibration Behavior of Flexible Rotor System Mounted on MR Squeeze Film Damper”, Proceedings, The 10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2010), Istanbul, Turkey, July 12-14, 2010.

Keshavarz, R., Ohadi, A.R., “Study on Sound Absorption and Transmission Loss of Transversely Isotropic Multi Layers Porous Material”, Proceedings, The 10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2010), Istanbul, Turkey, July 12-14, 2010.

Tayefi, S., Ohadi, A.R., “The Effect of Foot Mass on Bifurcation and Chaotic Behavior of a Simple Passive Walking Biped Model”, Proceedings, The 10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2010), Istanbul, Turkey, July 12-14, 2010.

Fakhari, V., Talebi, H. A., and Ohadi, A.R.,A Robust Vibration Control of Automotive Engine, Proceedings, The 10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2010), Istanbul, Turkey, July 12-14, 2010.

Tajeddini, V., Ohadi, A.R., and Sadighi, M.,3D Free Vibration Analysis of Functionally Graded Thick Circular and Annular Plates on Elastic Foundation, Proceedings, The 10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2010), Istanbul, Turkey, July 12-14, 2010.

Ghaednia, H., Ohadi, A.R., “Analyzing Magnetorheological Squeeze Film Dampers Considering Temperature Rise”, Proceedings, The 18th Annual-International Conference on Mechanical Engineering (ISME2010), Sharif University of Technology, Tehran, May 11-13, 2010.

Zamanian, A.H., Ohadi, A.R., “Gearbox Fault Detection through PSO Exact Wavelet Analysis and SVM Classifier”, Proceedings, The 18th Annual-International Conference on Mechanical Engineering (ISME2010), Sharif University of Technology, Tehran, May 11-13, 2010.

Zamanian, A.H., Ohadi, A.R., “Smart Fault Identification in Gearbox using Maximum Gaussian Correlation between Wavelet Coefficients of IMFs and Vibration Signal”, Proceedings, The 4th Annual Conference on Condition Monitoring and Fault Diagnostic (CMFD2010), Sharif University of Technology, Tehran, March 1-3, 2010 (in Persian).

Saeidifar, M., Ohadi, A.R., “Vibrations of Partially Fluid-Filled Functionally Graded Cylindrical Shells”, Proceedings, 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE2009), Lake Buena Vista, Florida, USA, November 13-19, 2009.

Hanifzadegan, M., Ohadi, A.R., “Global Active Control of Transmitted Sound into Acoustic Cavity with Speakers and Piezoelectric Patch Actuators”, Proceedings, 2009 ASME International Mechanical Engineering Congress and Exposition (IMECE2009), Lake Buena Vista, Florida, USA, November 13-19, 2009.

Ghaednia, H., Ohadi, A.R., Vibration Analysis of a Rotor-Bearing System with Magnetorheological Squeeze Film Dampers Considering Temperature Rise in MR-SFD”, Proceedings, 16th International Congress on Sound and Vibration (ICSV16), Krakow, Poland, July 5-9, 2009.

Fakhari, V., Ohadi, A.R., Active Robust Control of Geometrically Nonlinear Vibration of FGM Plate with Piezoelectric Sensor/Actuator Layers, Proceedings, 16th International Congress on Sound and Vibration (ICSV16), Krakow, Poland, July 5-9, 2009.

Hanifzadegan, M., Ohadi, A.R., Optimal Placement of Piezoelectric Patch Actuators for Sound Field Control Inside 3D Cavity”, Proceedings, 16th International Congress on Sound and Vibration (ICSV16), Krakow, Poland, July 5-9, 2009.

Rastegar Sepehr, S., Ohadi, A.R., Adaptive Fuzzy Neural Network Control on the Acoustic Field in a 3-D Enclosure with Flexible Panel”, Proceedings, 16th International Congress on Sound and Vibration (ICSV16), Krakow, Poland, July 5-9, 2009.

Tajeddini, V., Ohadi, A.R., Three Dimensional Free Vibration Analysis of Functionally Graded Thick, Variable Thickness, Annular Plate”, Proceedings, 16th International Congress on Sound and Vibration (ICSV16), Krakow, Poland, July 5-9, 2009.

Zamanian, A.H., Ohadi, A.R., Crack Identification in Timoshenko Beam Using Local Maxima Lines of Wavelet Coefficients, Proceedings, 16th International Congress on Sound and Vibration (ICSV16), Krakow, Poland, July 5-9, 2009.

Tebyanian, a., Ohadi, A.R., “Semi-Active Vibration Control of Euler-Bernoulli Beam Under Moving Load Using Moving Absorber”, Proceedings, 17th Annual-International Conference on Mechanical Engineering (ISME2009), Tehran University, Tehran, May, 2009 (in Persian).

Hanifzadegan, M., Ohadi, A.R., “Modeling and Multi-Channel Active Noise Control of 3-D Vibro-Acoustic System Using Piezoelectric and Speaker Actuators”, Proceedings, 17th Annual-International Conference on Mechanical Engineering (ISME2009), Tehran University, Tehran, May, 2009 (in Persian).

Ghaednia, H., Ohadi, A.R., “Semi-Active Vibration Control of Cable Using Magnetorheological Dampers”, Proceedings, 17th Annual-International Conference on Mechanical Engineering (ISME2009), Tehran University, Tehran, May, 2009 (in Persian).

Saeidifar, M., Ohadi, A.R., The Forced Vibrations of Non-Uniform Plate with Time-Dependent Elastic Boundary Conditions, Proceedings, 15h International Congress on Sound and Vibration (ICSV15), Daejeon, Korea, July 6-10, 2008.

Rastegar Sepehr, S., Ohadi, A.R., Investigating the Effects of the System Parameters on the Response of a Coupled Structural-Acoustic System Using the Impedance and Mobility Approach, Proceedings, 15h International Congress on Sound and Vibration (ICSV15), Daejeon, Korea, July 6-10, 2008.

Ghasemi, A.H., Ohadi, A.R., Ghaffari Saadat, M.H., Vibration Control of a Rotor-Bearing System with Smart Bearings Using Magnetorheologic Fluids, Proceedings, 15h International Congress on Sound and Vibration (ICSV15), Daejeon, Korea, July 6-10, 2008.

Fakhari, V., Ohadi, A.R., Nonlinear Vibration Control of FGM Plate with Piezoelectric Sensor/Actuator Layers Under Thermal Gradient and Mechanical Load”, Proceedings, 15h International Congress on Sound and Vibration (ICSV15), Daejeon, Korea, July 6-10, 2008.

Farrokhsiar, M., Ohadi, A.R., Active Isolation of a Flexible Structure Using a Novel Control Algorithm”, Proceedings, 2007 IEEE International Conference on Control and Automation, Guangzhou, China, May 30 to June 1, 2007.

Hashemi, O.R., Ohadi, A.R., Active Control of Chatter Vibrations in a Turning Process Using an Adaptive FXLMS Algorithm”, Proceedings, 14th International Congress on Sound and Vibration (ICSV14), Cairns, Australia, July 9-12, 2007.

Ohadi, A.R., Maghsoodi, G., and Fakhari, V., Simulation of Engine Vibration on Nonlinear Hydraulic Engine Mounts through Full-Vehicle Model”, Proceedings, 14th International Congress on Sound and Vibration (ICSV14), Cairns, Australia, July 9-12, 2007.

Saeidifar, M., Ohadi, A.R., Investigating The Effects of The Static Cutting Force on the Chatter Vibrations of Milling Process”, Proceedings, 14th International Congress on Sound and Vibration (ICSV14), Cairns, Australia, July 9-12, 2007.

Yeilaghi Tamijani, A., Abouhamze, M., Ohadi, A.R., and Eslami, M.R., Feedback Control of Piezo-Laminate Composite Plate”, Proceedings, 14th International Congress on Sound and Vibration (ICSV14), Cairns, Australia, July 9-12, 2007.

Hashemi, Seyyed M.R., Ohadi, A.R., Multi-channel Adaptive Vibration Control of Smart Plate Using Hybrid Algorithm”, Proceedings, 14th International Congress on Sound and Vibration (ICSV14), Cairns, Australia, July 9-12, 2007.

Yeilaghi Tamijani, A., Ohadi, A.R., and Eslami, M.R.,Thermal Vibration Analysis of Functionally Graded Plates with Piezoelectric Sensors and Actuators, Proceedings, 7th International Congress on Thermal Stress (TS2007), National Taiwan University of Science and Technology, Taiwan, June 4-7, 2007.

Ohadi, A.R., Fakhari, V.,Effect of Bell Plate on Vibration Behavior of Automotive Engine Supported by Hydraulic Engine Mounts, SAE 2007 Noise and Vibration Conference and Exhibition, SAE paper 2007-01-2364, Illinois, USA, May 15-17, 2007.

Yeilaghi Tamijani, A., Ohadi, A.R., and Eslami, M.R., “Finite Element Modeling of Functionally Graded Beams with Integrated Piezoelectric Layers for Vibration Control”, Proceedings, 15th Annual-International Conference on Mechanical Engineering (ISME2007), Amirkabir University of Technology, Tehran, May 15-17, 2007.

Hashemi, Seyyed M.R., Ohadi, A.R., “Vibration Control of Smart Flexible Plate Using Multi-Channel Adaptive Feedforward Algorithm”, Proceedings, 15th Annual-International Conference on Mechanical Engineering (ISME2007), Amirkabir University of Technology, Tehran, May 15-17, 2007 (in Persian).

Tagvayipour, A., Ohadi, A.R., “Investigating the Effect of Stiffener of Flexible Panel on Interior Noise of Acoustic Cavity Using Coupled Fluid-Structure Analysis”, Proceedings, 15th Annual-International Conference on Mechanical Engineering (ISME2007), Amirkabir University of Technology, Tehran, May 15-17, 2007 (in Persian).

Sadighi, M., Arvin, H., and Ohadi, A.R., “Investigating the Damping Characteristics of Sandwich Composite Plate with Viscoelastic Mid-layer”, Proceedings, 6th. Conference of Iranian Aerospace Society, K.N. Toosi University of Technology, Tehran, Iran, Feb. 24-26, 2007 (in Persian).

Ahani, R., Gaffari Saadat, M.H., and Ohadi, A.R., Monitoring of a Rotor Bearing System with Imbalance and Clearance, Proceedings, Third International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM2006), Hamammet , Tunisia, December 17-19, 2006.

Yeilaghi Tamijani, A., Gharib, A., Ohadi, A.R., Sadough Vanini, S.A., and Eslami, M.R.,Analytical Vibration Analysis of Functionally Graded Material Beams with Bonded Piezoelectric Sensors and Actuators, Proceedings, 12th European Conference on Composite Materials (ECCM12), Biarrilz, France, 29th August -1st September, 2006.

Yeilaghi Tamijani, A., Mirzaeifar, A., Ohadi, A.R., and Eslami, M.R.,Vibration Control of FGM Plate with Piezoelectric Sensors and Actuators Using Higher Order Shear Deformation Theory, Proceedings, 8th. Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2006), Torino, Italy, July 4-7, 2006.

Ohadi, A.R., Moghaddami, M.,Sound Absorption Prediction Using Finite Element Model Based on Modified Biot Poroelastic Model, Proceedings, 8th. Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA2006), Torino, Italy, July 4-7, 2006.

Ohadi, A.R., Emadi, A.,Active Noise Control Simulation in a Passenger Car Cabin Using Finite Element Modeling, Proceedings, Canadian Society for Mechanical Engineering Conference (CSME2006), paper IVTS-2-2, Kananaskis, Calgary, Alberta, Canada, May 21-24, 2006.

§    Yeilaghi Tamijani, A., Mirzaeifar, A., Ohadi, A.R., and Eslami, M.R., “Active Control of FGM Plates Using Piezoelectric Sensor/Actuator Patches”, Proceedings, 14th Annual-International Conference on Mechanical Engineering (ISME2006), Isfahan University of Technology, Isfahan, Iran, May 16-18, 2006.

Ohadi, A.R., Moghaddami, M., “Optimization of Acoustical Behavior of Sound Absorptions Based on Finite Element Modeling”, 2005 SAE Commercial Vehicle Engineering Congress and Exhibition, SAE paper 2005-01-3580, Metro Chicago (Rosemont), Illinois, USA, Nov. 1-3, 2005.

Ohadi, A.R., Maghsoodi, G.,Simulation of Engine Vibration on Nonlinear Hydraulic Engine Mounts, Proceedings, ASME 2005 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE 2005), Long Beach, California, USA, September 24-28 2005.

Ohadi, A.R., Moghaddami, M.,Investigating the Effects of Porous Material Compression on the Acoustical Behavior of Absorption and Barrier Materials, Proceedings, ASME 2005 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE 2005), Long Beach, California, USA, September 24-28, 2005.

Hadad, H., Ohadi, A.R., and Kargarnovin, M.H,Finite Element Model Updating in a Vehicle Chassis Frame, Proceedings, International Conference on Noise and Vibration Engineering (ISMA2004), Katholieke Universiteit, Leuven Belgium, September 20-22, 2004.

Ohadi, A.R., Seraj, S., “Comparison of Vibration Behavior of Engine on Elastic and Hydraulic Mounts”, Proceedings, 12th Annual (International) Mechanical Engineering Conference (ISME2004), Tarbiat Modarres University, Tehran, May 18-20, 2004 (in Persian).

Ohadi, A.R., Hosseini Tehrani, P. and Soltani, A., “Investigating Interior Noise of an Enclosed Cavity Using Boundary Element Method”, Proceedings, 12th Annual (International) Mechanical Engineering Conference (ISME2004), Tarbiat Modarres University, Tehran, May 18-20, 2004 (in Persian).

Ohadi, A.R., Langari, J., “Prediction of Sound Pressure Level of an Acoustic Cavity in High Frequencies Using SEA Method”, Proceedings, 12th Annual (International) Mechanical Engineering Conference (ISME2004), Tarbiat Modarres University, Tehran, May 18-20, 2004 (in Persian).

Moghaddami, M., Ohadi, A.R., “Investigating Acoustical Behavior of Sound Absorption Porous Materials”, Proceedings, 12th Annual (International) Mechanical Engineering Conference (ISME2004), Tarbiat Modarres University, Tehran, May 18-20, 2004 (in Persian).

Ohadi, A.R., Mehdigholi, H., Esmailzadeh, E., “Vibration and Frequency Analysis of Non-Uniform Timoshenko Beams Subjected to Axial Forces”, Proceedings, 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, D. C., November 15-21, 2003.

Ohadi, A.R., Mehdigholi, H., Esmailzadeh, E., “Feedforward Multiple-Input Active Noise Control Systems”, Proceedings, 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, D. C., November 15-21, 2003.

Kazemi, R., Ohadi, A.R. and Soleymani, M., “Nonlinear Sliding Mode Control of Active Suspension Considering Hydraulic Actuator Dynamics”, Proceedings, 11th Annual (International) Mechanical Engineering Conference (ISME2003), Mashhad, May 13-15, 2003.

Ohadi, A.R., Kargarnovin, H. and Hadad Khodaparast, H., “Finite Element Model Updating of Vehicle’s Chassis Frame”, Proceedings, 11th Annual (International) Mechanical Engineering Conference (ISME2003), Mashhad, May 13-15, 2003 (in Persian).

Farrahi, G.H., Ohadi, A.R. and Abbasi, M.R., “Investigating the Effect of Strain Rate on Dynamical Buckling Behavior of Thin Structures Under Impact Loads”, Proceedings, 11th Annual (International) Mechanical Engineering Conference (ISME2003), Mashhad, May 13-15, 2003 (in Persian).

Ohadi, A.R., Esmailzadeh, E. and Alasty, A., “Active Noise Cancellation Using Feedforward and Hybrid Controls”, Proceedings, 2001 ASME International Mechanical Engineering Congress and Exposition, New York, New York, November 16-21, 2001.

Ohadi, A.R., Esmailzadeh, E., and Alasty, A., “Adaptive Feed Forward Active Noise Control in an Acoustic Duct”, Proceedings, 2001 ASME Design Engineering Technical Conference, Pittsburg, Pennsylvania, September 9-12, 2001.

Eslami, M.R., Shakeri, M and Ohadi, A.R., “Coupled Thermoelasticity of Shells”, Proceedings, the First International Symposium on Thermal Stress, Thermal Stress “95”, Japan, June 4-7, 1995.

Shakeri, M, Eslami, M.R. and Ohadi, A.R., “Consideration of Normal Stress in Shell Equations under Shock Loads”, Proceedings, Second Biennial European Conference on Engineering Systems Design and Analysis (ESDA1994), London, July 4-7, 1994.

Eslami, M.R., Shaker, M., Yas, M.H. and Ohadi, A.R., “Galerkin Finite Element Analysis of Shells of Revolution Under Blast Loads”, Proceedings, Second Biennial European Conference on Engineering Systems Design and Analysis(ESDA1994), London, July 4-7, 1994.

Shakeri, M., Eslami, M.R., Ghassaa, M. and Ohadi, A.R., “Cylindrical Shell Under Impact Load including Transverse Shear and Normal Stress”, Proceedings, 12th Int. Conf. on Structural Mechanics in Reactor Tech. (SmiRT-12), Univ. of Stuttgart, Germany, 1993.

Shakeri, M., Eslami, A.R. and Ohadi, A.R., “Analysis of Cylindrical Shells Under Dynamics Loading, Including the Shear Effect”, Proceedings, First Annual Conf. of ISME, Tehran Univ., Feb., 1993 (in Persian).

§     

Theses Under Supervision

 

 Ph.D. Theses

 

Manadis Ghanbarbakhsh, Detection of the Presence, Position and Size of the Fault in the tube Using Guided Ultrasound Waves with the Consideration of Adjacent Defects, Mech. Eng. Dept., Amirkabir University of Technology, At present.

Hossein Rostami, Designing, Modeling and Controlling the Active Under-Knee Prosthesis with the Ability to Walk on Flat and Steep Surfaces, Mech. Eng. Dept., Amirkabir University of Technology, At present.

Abolfazl Hassani Baferani, Experimental Study and Modeling of Acoustical Behavior of Nano-Composite Polyurethane Foams including Carbone Nano tubes, Mech. Eng. Dept., Amirkabir University of Technology, February 2017.

Vahid Fakhari, Optimization and Control Improvement of Vehicle's Active Engine Mount System, Mech. Eng. Dept., Amirkabir University of Technology, September 2013.

Javad Ahmadi, Control Structure Design Methods Applied to Centralized Control of Vehicle Dynamics, Mech. Eng. Dept., Amirkabir University of Technology, June 2011.

Mirzayei Broojeni, B., Thermal Buckling and Post Buckling Analysis of FGM Shells with Piezoelectric Layers Actuators (Advisor), Mech. Eng. Dept., Amirkabir University of Technology, November 2009.

 

 M.Sc. Theses

 

Ehsan Takaloo, Modeling and Controlling a New Moving Arm for a Wheel of Unmanned Vehicle, Mech. Eng. Dept., Amirkabir University of Technology, February 2018.

Milad Khodabande, Optimization of Fixture Layout for Auto Body Parts Welding, Mech. Eng. Dept., Amirkabir University of Technology, February 2018.

Hosein Hoseinkhani, Improvement of Automotive Gearbox Fault Detection using Modern Vibration Signal Processing Method, Mech. Eng. Dept., Amirkabir University of Technology, February 2018.

Sahar Leisi Azar, Modelling, Simulation and Intelligent Control of Power Management of Hybrid Vehicle, Mech. Eng. Dept., Amirkabir University of Technology, January 2018.

Mina Beheshti, Design and Control of an Active Knee Rehabilitation Orthodontic Device by using MR Fluid, Mech. Eng. Dept., Amirkabir University of Technology, February 2017.

Seyed Mohammad Mir Amini, Vibration Analysis of Cylindrical Composite Piezoelectric Shells Containing Incompressible Flowing Fluid, Mech. Eng. Dept., Amirkabir University of Technology, January 2017.

Somayeh Mohammadi, Optimization of Counterweights for Dynamic Balancing of a Three Cylinder Engine, Mech. Eng. Dept., Amirkabir University of Technology, October 2016.

Ebrahim Karimi, Design, Modeling, and Simulation of Variable Valve Lift Mechanism to Improve an Internal Combustion, Mech. Eng. Dept., Amirkabir University of Technology, October 2016.

Erfan Khodabakhshi, Design and Implementation of Fuzzy Neural Networks Active Noise Control in Headset, Mech. Eng. Dept., Amirkabir University of Technology, February 2016.

Behnam Sheikh Shoaeei, Modeling, Simulation and Analysis of Dynamic Behavioral of Mechanical-Hydraulic System of Continuous Variable Valve Timing, Mech. Eng. Dept., Amirkabir University of Technology, February 2016.

Rahime Naseri, Robust Control of Engine Vibration using Active Engine Mount, Mech. Eng. Dept., Amirkabir University of Technology, February 2016.

Milad Kazemi Mehrabadi, Performance Comparison of Fuzzy and Robust Controllers in Reducing Vibration of Flexible Rotor System Including Short Smart MR Bearing, Mech. Eng. Dept., Amirkabir University of Technology, February 2016.

Iman Falsafi, Investigating the Effect of Air Gap on Acoustical Behavior of Micro Perforated Panels, Mech. Eng. Dept., Amirkabir University of Technology, October 2015.

Seyed Mohammad Sabet, Improvement in Sound Transmission Loss Coefficient in Nanostructure Reinforced Polycarbonate, Mech. Eng. Dept., Amirkabir University of Technology, October 2015.

Mohsen Lotfi, Investigation of Compression on Acoustical Behavior of Multi-Layers Anisotropic Porous Materials, Mech. Eng. Dept., Amirkabir University of Technology, July 2015.

Mostafa Asadi Khanouki, Improving Acoustical Behavior of Foams using Nano-Particles, Mech. Eng. Dept., Amirkabir University of Technology, February 2015.

Amir Ashkan Mokhtari, Delamination Detection in Composite Plates by Reflected Scattered Wave, Mech. Eng. Dept., Amirkabir University of Technology, February 2015.

Mir Alireza Seyed Kanani, Experimental Identification and Improvement of Acoustical Behavior of Smart Foam, Mech. Eng. Dept., Amirkabir University of Technology, February 2015.

Ebrahim Sadeghpour, Theoretical and Experimental Free and Forced Vibration Analysis of Debonded Curved Sandwich Beams, Mech. Eng. Dept., Amirkabir University of Technology, October 2014.

Mohammad Saber Nemati, Gearbox Fault Diagnosis Based on Non-stationary Vibration Signal using Wavelet and Fuzzy Decision Neural Network (FDNN) Classification, Mech. Eng. Dept., Amirkabir University of Technology, February 2014.

Hooman Tavasoli, Fault Detection in Pipes with Ultrasonic Lamb waves, Mech. Eng. Dept., Amirkabir University of Technology, February 2014.

Seyedeh Shahrzad Mirhosseini, A Vibrational Analysis (Theoretical and Experimental) of a Fiber-Metal Laminates Beam with Pre-Delamination, Mech. Eng. Dept., Amirkabir University of Technology, January 2014.

Mostafa Irannejad Parizi, Study on Nonlinear Dynamic Behavior of a Flexible Rotor Supported on Magnetorheologic Squeeze Film Damper, Mech. Eng. Dept., Amirkabir University of Technology, November 2013.

Zahra Ghasemi, Nonlinear Active Noise Control Based on Virtual Sensing Technique in an Enclosure with a Flexible Panel, Mech. Eng. Dept., Amirkabir University of Technology, October 2013.

Vahid Hemmati, Nonlinear Vibration of a Functionally Graded Plate with Piezothermoelestric Actuators Subjected to a Mechanical Load and Transient Temperature Gradient, Mech. Eng. Dept., Amirkabir University of Technology, September 2013.

Amaneh Maghsoodi, Pre-delamination Fault Detection of Fiber-metal Laminate Plate using the Guided Lamb Wave, Mech. Eng. Dept., Amirkabir University of Technology, September 2013.

Masoud Alizadeh Arjmand, Designing and Simulating a Computer-based Robot for Arm Stiffness Measurement, Mech. Eng. Dept., Amirkabir University of Technology, August 2013.

Mohammad Hossein Gharavian, IC Engine Fault Diagnosis using Acoustic and Vibration signals, Mech. Eng. Dept., Amirkabir University of Technology, February 2013.

Alireza Nikpourian, Design and Experimental Implementation of Active Noise Control for a Cooling Fan, Mech. Eng. Dept., Amirkabir University of Technology, February 2013.

Vahid Dabbagh, An Active-passive Noise Control in an Enclosure using Smart Foam, Mech. Eng. Dept., Amirkabir University of Technology, November 2012.

Ahmad Mahdian Parani, Nonlinear Vibration Control of a Sandwich Plate with Viscoelastic Core, Mech. Eng. Dept., Amirkabir University of Technology, October 2012.

Naser Elmi, Design, Analysis and Implementation of Active Front Steering on a Rc-Car, Mech. Eng. Dept., Amirkabir University of Technology, February 2012.

Yadollah Rasekhipour, Vibration Control of Engine via MR Engine Mounting System and Verification of the Behavior of the Mount Using HILS technique, Mech. Eng. Dept., Amirkabir University of Technology, February 2012.

Masoud Hemmatian, Robust Control of Flexible Rotor System with MR Bearings, Mech. Eng. Dept., Amirkabir University of Technology, February 2012.

Parizad Karbasi, Active Noise Control in Outdoor Environment, Mech. Eng. Dept., Amirkabir University of Technology, February 2012.

Hojjat Heidari, gearbox Fault Diagnosis at a Variable Speed using Wavelet Transform and Intelligent Classification Methods, Mech. Eng. Dept., Amirkabir University of Technology, February 2012.

Seyyed Alireza Hosseini, Experimental Study of Noise Interaction Between Two Out Let of a Squirrel-Cage Fan (Advisor), Mech. Eng. Dept., Amirkabir University of Technology, February 2012.

Soroush Sadeghneja, Theoretical and Experimental Investigation of Low Velocity Impact Behavior of the Sandwich Plates with Viscoelastic Core (Advisor), Mech. Eng. Dept., Amirkabir University of Technology, February 2012.

Navid Azadi, Simulation and Experimental Investigation of Fuzzy-Neural Network Active Noise Control in a 3D Enclosure with a Flexible Panel, Mech. Eng. Dept., Amirkabir University of Technology, February 2011.

Seyed Siavash Tayefi, Chaos Analysis of Passive Biped Robot with an Upper Body on an Uneven Surface, Mech. Eng. Dept., Amirkabir University of Technology, February 2011.

Reza Keshavarz, Optimal Layer Sequencing of Anisotropic Porous Materials for Maximizing Noise Absorption, Mech. Eng. Dept., Amirkabir University of Technology, February 2011.

Milad Jalali, Optimal Placement of Sensors and Actuators in Cluster Control of Acoustic Potential Energy of a Cavity, Mech. Eng. Dept., Amirkabir University of Technology, October 2010.

Shojaei, S.S., Design of Active Noise Control Headset, Mech. Eng. Dept., Amirkabir University of Technology, July 2010.

Dojamkhoy, Y., Nonlinear Robust Controller Design for Autonomous Underwater Gliders, Mech. Eng. Dept., Amirkabir University of Technology, July 2010.

Zamanian, A.H., A Comparative Study in Fault Diagnosis in Gearbox with the Aid of Hilbert-Huang Transform and Exact Wavelet Transform, Mech. Eng. Dept., Amirkabir University of Technology, July 2010.

Ghaednia, H., Semi-active vibration control of smart rotor bearing system, Mech. Eng. Dept., Amirkabir University of Technology, June 2010.

Mahmoodi, F., A Study of Free & Forced Vibrations of Sandwich Plate with Composite Skins and Viscoelastic Core (Advisor), Mech. Eng. Dept., Amirkabir University of Technology, March 2009.

Rastegar Sepehr, S., Fuzzy-Neural Network Control on the Acoustic Field in a 3D Enclosure with Flexible Panel, Mech. Eng. Dept., Amirkabir University of Technology, February 2009.

Hanifzadegan, M., Optimal Placement of Sensors and Actuators in Active Vibro-Acoustic Control of a 3D Enclosure, Mech. Eng. Dept., Amirkabir University of Technology, January 2009.

Saeidifar, M., Hydroelastic Vibration of a Partially Filled Cylindrical Tank with an Elastic Wall, Bottom and Surface Cover, Mech. Eng. Dept., Amirkabir University of Technology, November 2008.

Ramezani, S., Development of CAE Model for Prediction and Analysis of Gearbox Whine Noise, Mech. Eng. Dept., Amirkabir University of Technology, March 2008.

Sadeghi, A.H., Vibration Control of Rotor-Bearing Systems with Smart Journal Bearings using MR Fluid, Mech. Eng. Dept., Amirkabir University of Technology, March 2008.

Fakhari, V., Nonlinear Vibration Control of a Functionally Graded Plate with Piezo-thermoelectric Actuators Subjected to a Mechanical Load and Temperature Gradient, Mech. Eng. Dept., Amirkabir University of Technology, January 2008.

Yeilaghi Tamijani, A., Vibration of FGM Beam with Piezoelectric Sensor and Actuator (Advisor), Mech. Eng. Dept., Amirkabir University of Technology, April 2007.

Hashemi, O.R., Modeling, Simulation and Control of Chatter in Machine Tools, Mech. Eng. Dept., Amirkabir University of Technology, April 2007.

Hashemi, M.R., Simulation of Active Vibration Control of a Plate using Finite Element Technique, Mech. Eng. Dept., Amirkabir University of Technology, January 2007.

Arvin, H., A Study on Material Damping of Laminated Composite Sandwich Beam with a Viscoelastic Layer (Advisor), Mech. Eng. Dept., Amirkabir University of Technology, December 2006.

Ahani, R., Monitoring of a Rotor Bearing System with Imbalancy and Clearance, Mech. Eng. Dept., Amirkabir University of Technology, February 2006.

Emadi, A., Simulation of Active Control of Cabin Noise Using Finite Element Method, Automotive Eng. Dept., Iran University of Science and Technology, May 2005.

Maghsoodi, Gh., Vibration Simulation of Nonlinear Hydraulic Engine Mount System, Automotive Eng. Dept., Iran University of Science and Technology, January 2005.

Reyhani, S., Replacement of Aluminum Parts for Axle System and Fatigue Behavior Analysis, Automotive Eng. Dept., Iran University of Science and Technology, October 2004.

Moghaddami, M., Simulation and Analysis of the Acoustical Treatment of Automotive Absorption and Barrier Materials, Automotive Eng. Dept., Iran University of Science and Technology, June 2004.

Langari, J., Structural-borne Noise Prediction Using Statistical Energy Analysis Method, Automotive Eng. Dept., Iran University of Science and Technology, February 2004.

Soltani, A., Analysis of Vehicle’s Booming Noise with Boundary Element Method, Automotive Eng. Dept., Iran University of Science and Technology, February 2004.

Seraj, S., Modeling and Analysis of Hydraulic Engine Mount, Automotive Eng. Dept., Iran University of Science and Technology, February 2004.

Talebi,A.R., Finite Element Model Updating Based on FRF Results, Automotive  Eng. Dept., Iran University of Science and Technology, September 2003

Bazazi, B., Robust Control Design for Power Steering of Passenger Car, Automotive Eng. Dept., Iran University of Science and Technology, September 2003.

Soleymani, M., Optimal and Sliding Mode Control of Vehicle’s Active Suspension System, Automotive Eng. Dept., Iran University of Science and Technology, June 2003.

Abbasi, M.R., Improvement of the Crash Behavior of the Vehicle’s Front Rail using New Design Aspects, Mechanical Eng. Dept., Sharif University of Technology, February 2003.

Aslani, A.R., Dynamic Modeling (Mathematical & Experimental) of Port Fuel Injection Engine with Sensitivity Analysis, Automotive Eng. Dept., Iran University of Science and Technology, March 2003.

Hadad Khodaparast, H., Finite Element Model Updating in Vehicle’s Chassis Frame, Mechanical  Eng. Dept., Sharif University of Technology, February 2002.

Awards

 

Supervision of Best Ph.D. Thesis (Dr. Abolfazl Hassani Baferani) in Mechanical Engineering, Awarded by Iranian Society of Mechanical Engineers (ISME), 2018.

Supervision of Best Ph.D. Thesis (Dr. Abolfazl Hassani Baferani) in Vibration and Acoustics, Awarded by Iranian Society of Acoustics and Vibration (ISAV), 2017.

Selected Professor, Amirkabir University of Technology, 2013.

Supervision of Best B.Sc. Thesis in Mechanical Engineering, Amirkabir University of Technology, 2011.

Supervision of Best B.Sc. Thesis in Mechanical Engineering, Amirkabir University of Technology, 2009.

First Rank and Outstanding Graduate Student in M.Sc., Amirkabir University of Technology, 1995.

Second Rank Graduate Student in B.Sc., Amirkabir University of Technology, 1992.

 

 

EDITORIAL BOARD

Editorial Board Member, International Journal of Theoretical and Applied vibration and Acoustics (TAVA).

Editorial Board Member, International Journal of Automotive Engineering.

Editorial Board Member, Sound and Vibration (Persian).

Reviewer, Journal of Vibration and Control.

Reviewer, Trans. of ASME, Journal of Vibration and Acoustics. 

Reviewer, International Journal of Vibration and Acoustics. 

Reviewer, Journal of Sound and Vibration.

Reviewer, Journal of Adaptive Control and Signal Processing.

Reviewer, Neurocomputing.

Reviewer, Soft Computing.

Reviewer, Shock and Vibration.

Reviewer, International Journal for Computational Methods in Engineering Science & Mechanics.

Reviewer, International Journal of Adaptive Control & Signal Processing.

Reviewer, Amirkabir Journal of Engineering, Amirkabir University of Technology.

Reviewer, International Journal of Engineering Science, Iran University of Science and Technology.

 

Memberships

 

 

 

President of Iranian Society of Acoustics and Vibration (ISAV)- 2009-2018.

Founder Member, Iranian Society of Acoustics and Vibration (ISAV).

Founder Member, Iranian Society of Automotive Engineers (ISAE).

Member, Centre of Excellence in Smart Structures and Dynamical Systems (CESSDS)

Member, Iranian Society of Mechanical Engineers (ISME).

Member, Knowledge and Industry Coordination Centre of CMQCC (Condition Monitoring and Quality Control Center)

Member, The Acoustical Society of America (ASA).

Member, American Society of Mechanical Engineers (ASME).

Member, Automotive Engineering Society (SAE).

Member, The International Institute of Acoustics and Vibration (IIAV).