CURRICULUM VITAE

 

Manouchehr SALEHI BSc (Hons), MPhil, PhD,

Professor

                                           

 

 

 

 

 

 

Contact details:

             

Mechanical Engineering Department,

Amirkabir University of Technology,

424 Hafez Avenue,

P.O. Box 15875-4413,

Tehran, IRAN.

 

 Email: msalehi@aut.ac.ir

 

 EDUCATION

 

 B.Sc.(Hons):    Production Engineering, Leeds Polytechnic 1984

 M.Phil.:           Mechanical Engineering, Leeds Polytechnic 1987

 Ph.D.:             Mechanical Engineering, Lancaster University 1990

 

 RESEARCH INTERESTS

                   

 

·      Application of Dynamic Relaxation (DR) to plate and shell problems.

·      Design and Analysis of composite structures with elastic and viscoelastic behaviour.

·      Structures made of Shape Memory Alloys and Functionally Graded Materials.

·      FRP strengthening of concrete structures

·      Nanomechanics and Nanostructures

 

 

 MEMBERSHIP OF SOCIETIES

  

·         Member of the Iranian Society of Mechanical Engineers (ISME)

·         Member of the Iranian Society of Aeronautical Engineers (ISAE)

 

EDITORIAL BOARD OF CONFERENCES

 

·         The 15th Annual (International) Conference on Mechanical Engineering, Iranian Society of Mechanical Engineers, Amirkabir University of Technology, Tehran, Iran, 15th – 17th May 2007

 

·         The 1st Conference on Rotating Equipment in Oil and Power Industries, Razi Conference Centre, Tehran, Iran, 18th-19th October 2008

 

·         The 12th International Conference on Civil, Structural and Environmental, Engineering Computing, Funchal, Madeira, Portugal, 1-4 September 2009

 

·         The 2nd  Conference on Rotating Equipment in Oil and Power Industries, Razi Conference Centre, Tehran, Iran, 16th-17th May 2010

 

·         The 13th International Conference on Civil, Structural and Environmental, Engineering Computing, Chania, Crete, Greece, 6-9 September 2011

 

·         The 3rd Conference on Rotating Equipment in Oil and Power Industries, Razi Conference Centre, Tehran, Iran, 2nd-3rd January 2011

 

 

 

 

 WORK EXPERIENCE

 

 

 Sept.84-Aug.90  Undertook various part-time posts as a Teaching

                            Assistant at Leeds Polytechnic in computing

                            tutorial and at Lancaster University in

                            Engineering Laboratories.

 

 Sept.90-Feb.91   Lecturer, Mechanical Engineering Department,

                            Amirkabir University of Technology (Tehran

                            Polytechnic), Tehran.

 

 Feb.91-Sept.02   Assistant Professor, , Mechanical Engineering

                            Department, Amirkabir University of Technology (Tehran

                            Polytechnic) Tehran.

Feb.92-Nov.93    At the same time Assistant Professor at the Department

                            of Aeronutical Engineering, Air University, Tehran.

                            Taught Statics and Strength of Materials.

 

 Jun.92-Sept.93   Consultant, Iran Khodro Manufacturing Company,

                            Tehran, Iran.

 

 Sept.02-Dec.14   Associate Professor, Mechanical Engineering Department,

                            Amirkabir University of Technology (Tehran Polytechnic)

                            Tehran.

                            

 Jan.15- Date      Professor, Mechanical Engineering Department,

                           Amirkabir University of Technology (Tehran Polytechnic)

                           Tehran.

                           Teach the following subjects at undergraduate level:

                           Statics, Dynamics, Strength of Materials, Mechanics

                           of Composite Materials, Technical English Language,

                           Strength of Materials Laboratory.

 

                            At postgraduate level:

                            Experimental Stress Analysis, Theory of Elasticity

                            and Continuum Mechanics.

 

 

 

VISITING APPOINTMENT

 

February 2005 – February 2006

Visiting Principal Fellow, School of Civil, Mining and Environmental Engineering, Faculty of Engineering, University of Wollongong, Wollongong, NSW, Australia

 

MANAGERIAL RESPONSIBILITIES

 

Oct.97-Jan.05   Head of departmental library

Oct.99-Oct.01   Department deputy for finance and personnel

Oct.02-Jan.05   Department deputy for academic affair

Mar.06-Feb.15  Head of department computer centre

Oct.07-Jul. 08   Department deputy for finance and personnel

Nov.10-Jan.15  Director of Postgraduate Course in Composite Materials Eng

Oct.12- Date     Head of Solid Mechanics Group

July 14- Date    Director, Centre of Excellence in Smart Structures and

                         Dynamical Systems

 

PROJECTS

 

B.Sc. Projects:

 

                        I have supervised more than 40 undergraduate

                        final year projects.

M.Sc. Projects:

                        I have supervised more than 50 M.Sc. projects in the fields of

                        Plate and shell analysis, composite plate analysis, mechanics of

                        carbon nanotubes and viscoelastic behaviour of plates.

                        Currently I have 13 students under my supervision, 7 jointly

                        with other colleagues in the Mechanical, Textile and

                        Polymer Engineering Departments.

 

Ph.D. Project Completed:

1.    S.R. Falahatgar, ‘Buckling and Postbuckling of Fiber-reinforced Laminated Sector Plates with Polymeric Matrix’

2.    Javad Teimouri-Shandi

3.     Seyed Hassan Mohseni Salehi

4.    Kamran Asemi

5.    Abbas Assadi

6.    Abbas Bahri

 

 

Current Ph.D. Students: 4 Students, Hamid Salehi, Hamid Rajabpour-Shirazi, Arya Azari and Navid Ghourbani

 

 

Industrial Projects: Feasibility study on laser spot welding in Irankhoudro Car

                                Manufacturing Company, Tehran, Iran (2005),  Three

                                projects were carried out.

 

PUBLICATIONS

BOOKS

 

1

Bavi, O. and Salehi, M. ‘Genetic Algorithms and Optimization of Composite Structures, 1st Edition, Abed Publications, Tehran, Iran, (2009),(in Persian).

2

Bavi, O. and Salehi, M. ‘Genetic Algorithms and Optimization of Composite Structures, 2nd Edition, Abed Publications, Tehran, Iran, (2010), (in Persian).

 

 

 

JOURNAL PAPERS

 

 

1

Turvey, G.J. and Salehi, M., "DR Large Deflection Analysis of Sector Plates", Computers and Structures, Vol. 34, No.1, 101-112, (1990).

2

Turvey, G.J. and Salehi, M., “Computer-Generated Elasto-Plastic Design Data For Pressure Loaded Circular Plates”, Computers and Structures, Vol. 41, No. 6, 1329-1340,(1991).

3

Salehi, M. and Turvey, G.J., "Elastic Large Deflection Response of Annular Sector Plates- A Comparison of DR Finite-Difference, Finite- Element and Other Numerical Solutions", Computers and Structures, Vol. 40, No. 5, 1267-1278, (1991).

4

Salehi, M. and Shahidi, A. G., "Large Deflection Analysis of Sector Mindlin Plates", Computers and Structures,Vol. 52, No. 5, pp. 987-998, (1994).

5

Turvey, G.J. and Salehi, M., "Circular Plates With One Diametral Stiffener- An Elastic Large Deflection Analysis", Computers and Structures, Vol. 63, No. 4, 775-783,(1997).

6

Turvey, G.J. and Salehi, M., "Elastic Large Deflection Analysis of Stiffened Annular Plates", International Journal of Mechanical Sciences, Vol. 40, No. 1, 51-70, (1998).

7

Turvey, G.J. and Salehi, M., "Large Deflection Analysis of Eccentrically Stiffened Sector Plates", Computers and Structures, Vol. 68, 191-205, (1998).

8

Turvey, G.J. and Salehi, M.,"Elasto-Plastic Response of Uniformly Loaded Sector Plates:Full-Section Yield Model Predictions and Spread of Plasticity", Computers and Structures, Vol. 79, 2335-2348,(2001).

9

Salehi, M. and Salehi-Sadeh M., "Geomerically Non-Linear Analysis of Axisymmetric Tappered Circular Plates", International Journal of Engineering Sciences, Vol. 14, No.3, 101-118, (2003).        

10

Salehi,M. and Sobhani, A.R., "Elastic Linear and Nonlinear Analysis of Fiber-Reinforced Symmetrically Laminated Sector Mindlin Plates" Composite Structures, Vol. 65, Issue 1, 65-79, (2004).

11

Salehi, M. and Aghaei, H. "Dynamic Relaxation large deflection analysis of circular viscoelastic plates", Computers and Structures, 83, 1878-1890, (2005).

12

Turvey, G.J. and Salehi, M., "Annular sector plates: Comparison of full-section and layer yield predictions", Computers and Structures, 83, 2431-2441, (2005).

13

Salehi, M. and Ansari, F., "Viscoelastic Buckling of Euler-Bernoulli and Timoshenko Beams Under Time Variant General Loading Condition", Iranian Polymer Journal, 15(3), pp 183-193, (2006)

14

Gharib, A., Salehi, M. and Fazeli, S. "Deflection control of functionally graded material beams with bonded piezoelectric sensors and actuators", International Journal, Materials Science and Engineering: A, 498, 110-114, (2008)

15

 

Salehi, M,  Bakhtiari-Nejad, F and  Besharati, A.”Time-Domain Analysis Of Sandwich Shell With Passive Constrained Viscoelastic Layer” Scientia Iranica, Vol. 15, No. 5, 637-643, (2008).

16

Turvey, G.J., Salehi, M. “Elasto-Plastic Large Deflection Response of Pressure Loaded Circular Plates Stiffened by a Single Diametral Stiffener, International Journal of Thin-Walled Structures, 46, 991-1002, (2008).

17

Falahatgar, S.R., Salehi, M. and Aghdam, M.M. “Nonlinear Viscoelastic Response of Unidirectional Fibre-Reinforced Composites in Off-Axis Loading”, International Journal of Reinforced Plastics and Composites, Vol. 28, Bo. 15, pp. 1793-1811, (2009).

18

Falahatgar, S.R. and Salehi, M., “Dynamic Relaxation Nonlinear Viscoelastic Analysis of Annular Sector Composite Plate”, Journal of Composite Materials, 43(3), 257-275 (2009).

19

B. Behjat, M. Salehi*, M. Sadighi, A. Armin And M. Abbasi,  “Static, Dynamic and Free Vibration Analysis of Functionally Graded Piezoelectric Panels Using Finite Element Method” J. Intelligent Materials Systems and Structures, Vol. 20, pp. 1635-1646, (2009).

20

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Analytical and numerical techniques to predict the interfacial stresses of wavy carbon nanotube/polymer composites”, J. Mechanics of Composite Materials, 45(2), 207-212, (2009).

21

Salehi, M. and Falahatgar, S.R. “Geometrically non-linear analysis of unsymmetrical fiber- reinforced laminated annular sector composite plates”, Transaction B: Mechanical Engineering, Scientia Iranica, 17(3), 205-216, (2010).

22

Falahatgar, S.R., Salehi, M and Aghdam, M.M. "Micro- to- Macro analysis of nonlinear viscoelastic composite plate using DR method” Applied Composite Materials, 17, 427-440, (2010).

23

Behjat, B., Salehi, M., Armin, A., Sadighi, M. And Abbasi, M. “Static and dynamic analysis of functionally graded piezoelectric plates under mechanical and electrical loading”, Scientia Iranica, Trans. B: Mechanical Engineering, 18(4), pp. 986-994, August (2011).

24

Asemi, K., Salehi, M., Akhlaghi, M. ‘Elastic solution of two-dimensional functionally graded thick truncated cone with finite length under hydrostatic combined loads’, Acta Mechanica, DOI 10.1007/s00707-010-0380-z, (2010).

25

Asemi, K., Akhlaghi, M., Salehi, M., Hosseini zad, S.K. ‘Analysis of functionally graded thick truncated cone with finite length under hydrostatic internal pressure’, Archive of Applied Mechanics, DOI: 10.1007/s00419-010-0472-1, (2010).

26

Akbarzadeh, I., Attarha, M. J., Salehi, M., Sattari-Far, I., ‘Numerical and Experimental Study on the Effect of Post-Weld Heat Treatment Parameters on the Relaxation of Welding Residual Stresses’, Journal of Strain Analysis for Engineering Design, DOI: 10.1177/2041313010392867, 46(2), 79-86 (2011).

27

Akbarzadeh, I., Sattari-Far, I., Salehi, M., Numerical and Experimental Study of the Effect of Short-Term and Long-Term Creep Modeling in Stress Relaxation of a Multi-Pass Welded Austenitic Stainless Steel Pipe’, International Journal, Materials Science and Engineering: A, 528, 2118-2127, (2011).

28

Asemi, K., Salehi, M., Akhlaghi, M., ‘Dynamic analysis of a functionally graded thick truncated cone with finite length’, International Journal of Mechanics and Materials in Design, 6(4), 367-378, (2011).

29

Asemi, K., Akhlaghi, M., Salehi, M., ‘Dynamic analysis of thick short length FGM cylinders, Meccanica, DOI 10.1007/s11012-011-9527-9, (2011).

30

Falahatgar, S.R., Salehi, M., ‘Nonlinear viscoelastic response of unidirectional polymeric laminated composite plates under bending loads, Applied Composite Materials, online, doi: 10.1007/s10443-011-9212-0, (2011).

31

Akbarzadeh, I., Sattari-Far, I., Salehi, M., ‘A New Method for

Determination of Combined Convection Coefficient for Welding

Simulation’, Accepted in International Journal of Academic Research.

33

Behzadpoor, H., Masoumi, S., Salehi, M. ‘Micromechanical Analysis of nonlinear viscoelastic unidirectional fibre-reinforced composites’, Applied Mechanics and Materials, Vols. 110-116, pp. 1166-1170, October (2011).

34

Masoumi, S., Salehi, M., Akhlaghi, M. ‘Multiscale analysis of viscoelastic laminated composite plates using generalized differential quadrature’, Acta Mechanica, Vol. 223, pp 2459-2476 (2012), DOI 10.1007/s00707-012-0710-4

35

Masoumi, Akhlaghi, M., S., Salehi, M. ‘Multi-Scale Analysis of Viscoelastic-Viscoplastic Laminated Composite Plates Using Generalized Differential Quadrature Method’, Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, DOI:10.1177/0954406212464929.

36

Ashrafi, H., Asemi, K.,  Shariyat, M., Salehi, M. ‘Two-Dimensional Modeling of Heterogeneous Structures Using Graded Finite Element and Boundary Element Methods’, Meccanica, DOI 10.1007/s11012-012-9623-5, (2012).

37

Falahatgar, S.R. and Salehi, M. ‘Dynamic Relaxation Nonlinear Viscoelastic Bending Analysis of Higher Order Annular Sector Plates’, International Journal for Computational Methods in Engineering Science and Mechanics, Accepted for publication, doi: 10.1080/15502287.2013.784379, (2013).

38

Asemi, K., Ashrafi, H., Salehi, M., Shariyat, M., ‘Three-dimensional static and dynamic analysis of functionally graded elliptical plates, employing graded finite elements’, Acta Mechanica, doi: 10.1007/s00707-013-0835-0, (2013).

39

Pejman, R., Salehi Mohseni, H and Salehi, M. ‘Numerical study of interfacial crack growth effects on nanoindentation mechanical properties in presence of pre-existing defect, Thin Solid Films, Vol. 545, pp. 408-413, (2013).

40

Timouri Shandi,J, Ahmadi Najafabadi, M., Salehi, M., ‘Tribological Behavior of Sheet Metal Forming Process Using Acoustic Emission Characteristics, Tribology Letters, Vol. 51, No. 2, pp. 1-15, (2013).

41

Timouri Shandi,J, Ahmadi Najafabadi, M., Salehi, M., ‘Investigation of surface damages during sheet metal forming using acoustic emission, Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, Vol. 227, No. 3, pp. 286-296, (2013).

42

Asemi, K., Shariyat, M., Salehi, M., Ashrafi, H., ‘A full compatible three-dimensional elasticity element for buckling analysis of FGM rectangular plates subjected to various combinations of biaxial normal and shear loads’, Finite Elements In Analysis And Design, Vol. 74, No. 1, pp. 9-21, (2013).

43

Timouri Shandi,J, Ahmadi Najafabadi, M., Salehi, M., ‘Wavelet-Based  acoustic emission characterization of surface damages during experimental simulation of sheet metal forming’, Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, Vol. 227, No. 3, pp. 286-296, (2013).

44

Bahri, A., Salehi, M., Akhlaghi, M., ‘Using a pseudo-functionally graded interlayer in order to improve the static and dynamic behavior of wind turbine blade T-bolt root joints’, Composite Interfaces, Vol. ??, No. ??, pp. 1-22, (2014).

45

Fatemifar, F., Salehi, M., Adibipoor, R., Kordani, N., ‘Three-phase modeling of viscoelastic nanofiber-reinforced matrix, Journal of Mechanical Science and Technology, Vol. 28, No. 3, pp. 1039-1044, (2014).

46

Asemi, K., Salehi, M., Akhlaghi, M., ‘Three-dimensional natural frequency analysis of anisotropic functionally graded annular sector plates resting on elastic foundations’, Sci Eng Compos Mater, Vol. ??, No. ??, pp. ??, (2014)

47

Asemi, K., Jedari Salami, S., Salehi, M., Sadighi, M., Dynamic and Static analysis of FGM Skew plates with 3D Elasticity based Graded Finite element Modeling’, Latin American Journal of Solids and structures, Vol. 11, No. 1, pp. 504-533, (2014).

48

Zafarmand, H., Salehi, M., Asemi, K., ‘Three dimensional free vibration and transient analysis of two directional functionally graded thick cylindrical panels under impact loading‘, Latin American Journal of Solids and structures, Vol. x, No. x, pp. x-x, (201x).

49

Asemi, K., Abedi, M., Akhlaghi, M., Salehi, M., ‘Natural frequency analysis of two dimensional functionally graded thick truncated cone, Caspian Journal of Applied Sciences Research, Vol. 3, No. 4, pp. 30-43, (2014).

50

Maleki Moghadam, R., Hosseini, S. A., Salehi, M., ‘The influence of Stone–Thrower–Wales defect on vibrational characteristics of single-walled carbon nanotubes incorporating Timoshenko beam element‘, Physica E, Vol. 62, No. 1, pp. 80-89, (2014).

51

Salehi, S. H., Salehi, M., ‘Numerical investigation of nanoindentation size effect using micropolar theory‘, Acta Mech, Vol. X, No. X, pp. X-X, (201X).

52

Asemi, K., Salehi, M., Akhlaghi, M., Transient thermal stresses in functionally graded thick truncated cones by graded finite element method‘, International Journal of Pressure Vessels and Piping, Vol. 119, No. 1, pp. 52-61, (2014).

53

Salehi, S. H., Salehi, M., ‘Finite element study for conical indentation of elastoplastic micropolar material‘, International Journal of Solids and Structures, Vol. 51, No. 1, pp. 3987-3995, (2014).

54

Mouloodi, S., Mohebbi, S., Khojasteh, J., Salehi, M., ‘Size-dependent static characteristics of multicrystalline nanoplates by considering surface effects‘, International Journal of Mechanical Sciences, Vol. 79, No. 1, pp. 162-167, (2014).

55

Mouloodi, S., Khojasteh, J., Salehi, M., Mohebbi, S., ‘Size dependent free vibration analysis of multicrystalline nanoplates by considering surface effects as well as interface region, International Journal of Mechanical Sciences, Vol. 85, No. 1, pp. 160-167, (2014).

56

Rasti, A., Sattarifar, I., Salehi, M., Karimnia, V., ‘Stress analysis of welded joints in internal stiffener rings in an aluminum cylinder, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, Vol. X, No. X, pp. X-X, (201X).

57

Zamani, H. A., Bodaghi, M., Aghdam, M. M., Salehi, M., ‘Accurate damping analysis of viscoelastic composite beams and plates on suppressive foundation‘, Journal of Composite Materials, Vol. X, No. X , pp. X-X, (2014).

58

Asemi, K., Salehi, M., Akhlaghi, M., ‘Post-buckling analysis of FGM annular sector plates based on three dimensional elasticity graded finite elements‘, International Journal of Non-Linear Mechanics, Vol. 67, No. 1, pp. 164-177, (2014).

59

Asemi, K., Salehi, M., Sadighi, M., ‘Three dimensional static and dynamic analysis of two dimensional functionally graded annular sector plates‘, Structural Engineering and Mechanics, Vol. 51, No. 6, pp. 1067-1089, (2014).

60

 Assadi, A., Salehi, M., Akhlaghi, M., ‘Orientation dependent size effects in single crystalline anisotropic nanoplates with regard to surface energy‘, Physics Letters A, Vol. 379, No. 1, pp. 1437-1444, (2015).

61

Assadi, A., Akhlaghi, M., Salehi, M., ‘Some modifications in evaluation of the size effects related to surface stresses in nanostructures‘, Physica E, , Vol. 68, No. 1, pp. 190-201, (2015).

62

Asemi, K., Salehi, M., Akhlaghi, M., ‘Three dimensional biaxial buckling analysis of functionally graded annular sector plate fully or partially supported on Winkler elastic foundation‘, Aerospace Science and Technology, Vol. X, No. X, pp. X-X, (2014).

63

Bahri, A., Salehi, M., Akhlaghim M, ‘Using a pseudo-functionally graded interlayer in order to improve the static and dynamic behavior of wind turbine blade T-bolt root joints’, Composite Interfaces, (2014).

 

 

 

 

 

 

CONFERENCE PAPERS

 

 

1

Turvey, G.J. and Salehi, M., “Computer Generated Elasto-Plastic Design Data For Pressure Loaded Circular Plates”,in Proceedings of the Fourth International Conference on Civil and Structural Engineering Computing, Edinburgh, U.K., Edited by B.H.V. Topping, Vol. 2, pp. 89-102,(1989).

2

Turvey, G.J. and Salehi, M., "Diametrally Stiffened Circular Plates- An Elastic Large Deflection Analysis",in Proceedings of the Fifth International Conference on Civil and Structural Engineering Computing, 17-19 August 1993, Edinburgh, Edited by B.H.V. Topping, Vol. 2, pp. 151-158, (1993).                

3

Salehi, M and Shahidi, A.G., "Elastic Response of Moderately Thick Sector Plates", Proceedings of the Fifth International Conference on Civil and Structural Engineering Computing, 17-19 August 1993, Edinburgh, Edited by B.H.V. Topping, Vol. 2, pp. 159-169, (1993).                

4

Salehi, M. and Shahidi, A.G., "Transverse Shear Deformability of Sector Plates-New Results", Proceedings of the 1994 ASME Engineering Systems Design and Analysis (ESDA) Conference in London, PD Vol. 64-8.3, pp. 545-552,4-7 July (1994).

5

Turvey, G.J. and Salehi, M. "Large Deflection Analysis of Eccentrically Stiffened Sector Plates", Developments in Computational Techniques for Civil Engineering, Civil-Comp Press, Edinburgh, U.K., pp. 243-253, (1995).

6

Turvey, G.J. and Salehi, M., "Full-Section Yield Analysis of Uniformly Loaded Sector Plates", ANS Symposium, Trends in Structural Mechanics, Theory, Education and Practice", University of Waterloo, Canada, pp. 289-298, 10th-12th July (1997).

7

Salehi, M., Shakeri, M. and Khorsandi, A., "Small Deflection Analysis of Fiber-Reinforced Laminated Sector Mindlin Plates", Proceedings of the Fourth International Conference On Computational Structures Technology, Advances in Computational Structural Mechanics, Civil-Comp Press, Edinburgh,U.K., Edited by B.H.V. Topping, pp.199-208, 18th-20th August, (1998).

8

Turvey, G.J. and Salehi, M., "Elasto-Plastic Response of Uniformly Loaded Sector Plates: Full-Section Yield Model Predictions and Spread of Plasticity", Computing Developments in Civil and Structural Engineering Conference, Edited by B. Kumar and B.H.V. Topping, pp. 157-169, (1999).

9

Salehi, M. and Sobhani, A.R., "Initial Flexural Failure Prediction of Fiber-Reinforced Laminated Sector Mindlin Plates", in Proceedings of the Sixth International Conference on Computational Structures Technology, B.H.V. Topping and Z. Bittnar, (Editors), Civil-Comp Press, Stirling, United Kingdom, Paper 78, 2002.

10

Turvey, G.J. and Salehi, M., "Annular Sector Plates: Comparison of Full-Section and Layer Yield Predictions",in Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing, B.H.V. Topping, (Editor), Civil-Comp Press, Stirling, United Kingdom, Paper 35, 2003.

11

Salehi, M. and Tayefeh, M., "Micro as Required for Macromechanics of Circular, Annular and Sector Plates", in Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing, B.H.V. Topping, (Editor), Civil-Comp Press, Stirling, United Kingdom, Paper 33, 2003.

12

Salehi, M. and Tayefeh, M., "Non-Linear Finite Element Analysis of Functionally Graded Material Sector Plates", in Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing, B.H.V. Topping, (Editor), Civil-Comp Press, Stirling, United Kingdom, Paper 32, 2003.

13

Salehi, M. and Safi-Djahanshahi, A.,"Dynamic Relaxation Buckling Analysis of Viscoelastic plates", in Proceedings of the Seventh  International Conference on Computational Structures Technology, B.H.V. Topping and C.A. Mota Soares,(Editors), Civil-Comp Press, Stirling, United Kingdom, Paper 256, 2004.

14

Besharati, A., Bakhtiari-Nejad, F. and Salehi, M. “Investigation of vibration and non-active dampers in three layers cylindrical shells under dynamic excitations” 8th International and 12th Annual Iranian Mechanical Engineering Society Conference, University of Gilan, (2004) Rasht, Iran.

15

Sazegar, A, Salehi, M and Lyaghat, A, “Numerical solution of thick cylinder subject to internal blast loading using Finit Difference and Comparison with Finite Element Method (LS-Dyna)” 9th International and 13th Annual Iranian Mechanical Engineering Society Conference, Isfahan University of Technology,  (2005), Isfahan, Iran.

 

16

Besharati, A., Bakhtiari-Nejad, F. and Salehi, M. “Determination of dynamical parameters of viscoelastic material by analysing experimental frequency response data” 9th International and 13th Annual Iranian Mechanical Engineering Society Conference, Isfahan University of Technology,  (2005), Isfahan, Iran.

 

17

Salehi, M and Falahatgar, SR, “Deflection measurement and numerical analysis of metallic and  Fibre-reinforced laminated plates, Australian Structural Engineering Conference, Newcastle, Australia, Paper No. 15, (2005)

 

18

Salehi, M, Aghdam, M.M. and, Falahatgar, S.R. "Simplified unit cell method for micromechanical studies of viscoelastic properties of unidirectional fibre-reinforced composites", in Proceedings of the Eighth  International Conference on Computational Structures Technology, B.H.V. Topping, G Montero and R. Montenegro,(Editors), Civil-Comp Press, Stirling, United Kingdom, Paper No. 261, 2006.

 

19

Salehi, M. and Falahatgar, S.R. "Creep response of nonlinear viscoelastic fibre-reinforced composites using micromechanical approach", in Proceedings of the 2nd International Conference on Recent Advances in Composite Materials, February  20-23 2007, Institute of Technology, Banaras Hindu University, Department of Mechanical Engineering, Varanasi – 221 005, INDIA.

 

20

Fazeli, S., Gharib, A. and Salehi, M. "Thermomechanical analysis of smart functionally graded rectangular plates using GDQ method", in Proceedings of the 2nd International Conference on Recent Advances in Composite Materials, February  20-23 2007, Institute of Technology, Banaras Hindu University, Department of Mechanical Engineering, Varanasi – 221 005, INDIA.

 

21

Gharib, A., Fazeli, S. and Salehi, M. "Deflection control of functionally graded material beams with bonded piezoelectric sensors and actuators", in Proceedings of the 2nd International Conference on Recent Advances in Composite Materials, February  20-23 2007, Institute of Technology, Banaras Hindu University, Department of Mechanical Engineering, Varanasi – 221 005, INDIA.

 

22

Bafekrpour, E., Salehi, M., Khanjani, M. and Abdoulahpur, A. "Tensile and shear strength of spot weld and laser weld", in Proceedings of the 8th Iranian National Conference on Welding and Inspection, 1 – 3 May 2007, Tehran, Iran Welding and NDT Society (in Persian).

 

23

Bafekrpour, E., Salehi, M. and Khanjani, M. "Numerical modeling of laser welding", in Proceedings of the 8th Iranian National Conference on Welding and Inspection, 1 – 3 May 2007, Tehran, Iran Welding and NDT Society (in Persian).

 

24

Bavi, O. and Salehi, M. "Analysis of stress wave propagation due to impact on nanocomposite plates", In: Proceedings of the 15th Annual (International) Conference on Mechanical Engineering, 15 – 17 May 2007, Mechanical Engineering Department, Amirkabir University of Technology, Tehran, I.R. Iran (in Persian).

 

25

Salehi, M. and Hadi, M.S.N., "Continuous unidirectional carbon fibre-reinforced concrete beam", in Proceedings of the Eleventh International Conference on Civil, Structural and Environmental Engineering Computing, B.H.V. Topping, (Editor), Civil-Comp Press, Stirling, United Kingdom, Paper 168, 2007.

 

26

Bafekrpour, E., Salehi, M. “Continuum modeling of nanocomposites with various carbon nanotube types using F.E.M.”, 7th International Conference of Iranian Aerospace Society, February  19-21 2008, Sharif University of Technology, Tehran, Iran

 

27

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Effect of wall thickness on the mechanical properties of single-walled carbon nanotubes”, 7th International Conference of Iranian Aerospace Society, February  19-21 2008, Sharif University of Technology, Tehran, Iran

 

28

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Mechanical properties of single-walled carbon nanotubes”, 7th International Conference of Iranian Aerospace Society, February  19-21 2008, Sharif University of Technology, Tehran, Iran

 

29

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Nondimensional analysis of interfacial stresses of wavy CNT/polymer composites using a new RVE”, 7th International Conference of Iranian Aerospace Society, February  19-21 2008, Sharif University of Technology, Tehran, Iran

 

30

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Effect of nonbouded interactions on the mechanical properties of single-walled carbon nanotubes“ In: Proceedings of the 16th Annual (International) Conference on Mechanical Engineering, 13 – 15 May 2008, Mechanical Engineering Department, Shahid Bahonar  University of Kerman, Tehran, I.R. Iran.

 

31

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Analytical and numerical techniques to predict wavy carbon nanotubes properties“ In: Proceedings of the 16th Annual (International) Conference on Mechanical Engineering, 13 – 15 May 2008, Mechanical Engineering Department, Shahid Bahonar  University of Kerman, Tehran, I.R. Iran.

 

32

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Fiber pull-out modeling of wavy CNT/Polymer composites” In: Proceedings of the 2nd International Conference on MEMS and Nanotechnology, ICMN 08, 13-15 May 2008, Kuala Lumpur, Malaysia.

 

33

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Influence of Van Der Waals interaction on the mechanical properties of SWCNTs with introducing effective wall thickness” In: Proceedings of the 2nd International Conference on MEMS and Nanotechnology, ICMN 08, 13-15 May 2008, Kuala Lumpur, Malaysia.

 

34

Bafekrpour, E., Salehi, M. “Analysis of microstructural parameters in the mechanical properties of polymer nanocomposites” In: Proceedings of the 15th International Conference on Mechanics of Composite Materials, 26 – 30 May, 2008, Riga, Latvia.

 

35

Shirani, M Salehi, M. Sadighi, M. “Elastoviscoelastic-viscoplastic behaviour of a polypropylene plate: computational modeling and experimental approach”, In: Proceedings of the 15th International Conference on Mechanics of Composite Materials, 26 – 30 May, 2008, Riga, Latvia.

 

36

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “ Analytical and numerical techniques to predict the interfacial stresses of wavy carbon nanotube/polymer composites”, In: Proceedings of the 15th International Conference on Mechanics of Composite Materials, 26 – 30 May, 2008, Riga, Latvia.

 

37

Shirani, M Salehi, M. Sadighi, M. “Predicting the properties of a reinforced thermoplastic composite from a representative volume element”, In: Proceedings of the 15th International Conference on Mechanics of Composite Materials, 26 – 30 May, 2008, Riga, Latvia

 

38

Yazdchi, K., Salehi, M. “Nondimensional analysis of interfacial stresses of wavy CNT/polymer composites, In: (ed.) Mechanics of Solids, Structures and Fluids, ASME International Mechanical Engineering Congress and Exposition, Boston, Massachusetts (2008). The American Society of Mechanical Engineers, New York, 31st October – 6th November, (2008).

 

39

Yazdchi, K., Salehi, M. and Shokrieh, M.M. “Three dimensional finite element modelling of single-walled carbon nanotubes” In: (ed.) Nanoparticles & Nanocomposites, The 1st International Conference on Composites: Characterization, Fabrication and Application (CCFA-1). Kish Island, Iran, 15th – 18th December, (2008).

 

40

Falahatgar, S.R., Salehi, M and Aghdam, M.M. "Micro- to- Macro analysis of nonlinear viscoelastic composite plate using DR method” In: (ed.) The 7th International Conference on Composite Science and Technology (ICCST7). Sharjah, United Arab Emirates, (2009). [20th – 22nd Jan.]

 

41

Akherat-Doust, H. and Salehi, M. “Spectral Finite Element Analysis of Transverse Elastic Wave Propagation in Composite Plates”, In: Proceedings of the 17th Annual (International) Conference on Mechanical Engineering, 19 – 21 May 2009, Mechanical Engineering Department, University of Tehran, Tehran, I.R. Iran (in Persian).

 

42

Salehi, M., Bidi, A and Bafekrpour, E., “Comparison of Tensile and Shear Strength of Resistance Welding with Laser Welding”, In: Proceedings of the 17th Annual (International) Conference on Mechanical Engineering, 19 – 21 May 2009, Mechanical Engineering Department, University of Tehran, Tehran, I.R. Iran (in Persian).

 

43

Bavi, O., Salehi, M. and Tarkesh-Isfahani, R., “Identifications and Optimizations of Effective Parameters in the Mechanical Properties of Nanocomposite Plates Using Genetic Algorithms”, In: Proceedings of the 17th Annual (International) Conference on Mechanical Engineering, 19 – 21 May 2009, Mechanical Engineering Department, University of Tehran, Tehran, I.R. Iran (in Persian).

 

44

Falahatgar, S.R., Salehi, M and Aghdam, M.M., “Dynamic Relaxation Creep Buckling Analysis of Annular Sector Composite Plates”, In: Proceedings of the Twelfth International Conference on Civil, Structural and Environmental, Engineering Computing, Funchal, Madeira, Portugal, 1-4 September 2009, Paper No. 200

 

45

B. Behjat, B., Salehi, M., Sadighi, M., Khoshravan, M.R. and Armin, A., “Static and Dynamic Analysis of FGM panels with piezoelectric Layers under Mechanical and Electrical Loadings”, In: Proceedings of the Twelfth International Conference on Civil, Structural and Environmental, Engineering Computing, Funchal, Madeira, Portugal, 1-4 September 2009, Paper No. 164

 

46

Salehi, M. and Akharatdoost, H. “Stress Wave Propagation in Shape Memory Alloy Reinforced Rectangular Composite Plates”, In: Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 6-8 September 2010.

 

47

Fazeli, S., Salehi, M., Zamani, A. and Zamani, F. “Application of Generalized Differential Quadrature Method to Bending Analysis of Laminated Thick Plates with Mixed Boundary Conditions” In: Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 6-8 September 2010.

 

 

Turvey, G.J. and Salehi, M. “Cross-Stiffened Circular Plates – An Elasto-Plastic Large Deflection Analysis”, In: Proceedings of The Tenth International Conference on Computational Structures Technology, Valencia, Spain 14-17 September 2010, Paper No. 289

 

49

Asemi, K., Salehi, M., Akhlaghi, M., ‘Two Dimensional Wave Propagation in Thick Short Length FGM Cylinders’, In: Proceedings of The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2). Kish Island, Iran, 27th – 30th December (2010).

 

50

Zamanian, H., Salehi,M.,’Stress Concentration in an Orthotropic Lamina with circular hole using finite element method’, In: Proceedings of the 19th Annual Conference on Mechanical Engineering, May 2011, Faculty of Engineering, Birjand University, Birjand, I.R. Iran (in Persian).

 

51

Asemi, K., Salehi, M., Akhlaghi, M., ‘Comparison of three different functionally graded materials for thick hollow cylinders of finite length’ In: Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental, Engineering Computing, Chania, Crete, Greece, 6-9 September (2011).

 

52

Masoumi, S., Behzadpoor, H., Salehi, M., Akhlaghi, M., ‘ Multi-scale analyses of viscoelastic laminated composite plate’, In: Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental, Engineering Computing, Chania, Crete, Greece, 6-9 September (2011).

 

53

Amid, H.,  Asgharian Jeddi, A.A.,  Salehi, M.,  Dabiryan, H. ‘Suitability of Tubular Woven Fabric as the Reinforcement of Composite Pipes’ In: Proceedings of The 11th Asian Textile Conference Knowledge Convergence in Textiles for Human and Nature, EXCO, Daegu, Korea, November 1 – 4, (2011).

 

54

Pejman, R., Salehi, H., Salehi, M. ‘The effect of crack nucleation and growth on the mechanical properties in nanoindentation test’, In: Proceedings of The Twentieth Annual International Conference on Composites/Nano Engineering, Bejing, China, July 22-28, (2012).

 

55

Masoumi, S., Behzadpour, H., Salehi, M. ‘Development of simplified unit cell method for micromechanical analysis of viscoelastic-viscoplastic’, In: Proceedings of The Twentieth Annual International Conference on Composites/Nano Engineering, Bejing, China, July 22-28, (2012).

 

56

Asemi, K., Salehi, M., Akhlaghi, M. ‘Free Vibration Analysis of Two Dimensional Functionally Graded Plates Based on Three Dimensional Theory of Elasticity And Graded Finite Element Method’, In: Proceedings of The Twentieth Annual International Conference on Composites/Nano Engineering, Bejing, China, July 22-28, (2012).

 

57

Asemi, K., Salehi, M., Akhlaghi, M. ‘Natural frequency analysis of functionally graded thick truncated cones’, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), December 18-19 2012, Tehran, Iran.

 

58

Asemi, K., Salehi, M., Akhlaghi, ‘Natural frequency analysis of functionally graded plate with circular cutout’, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), December 18-19 2012, Tehran, Iran.

 

59

Fatemifar, F., Salehi, M., Bahrami, B. ‘Effects of interphase gradient on viscoelastic properties of nanocomposites’, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), December 18-19 2012, Tehran, Iran.

 

60

Hassanli, E., Salehi, M., Sadough-Vanini, S. A. ‘Buckling analysis of multilayer composite curved panel with embedded shape memory alloy’, The 3rd International Conference on Composites: Characterization, Fabrication and Application (CCFA-3), December 18-19 2012, Tehran, Iran.

 

61

Masoumi, S., Salehi, M., ‘Nonlinear Viscoelastic Analysis of Laminated Composite Plates – A Multi Scale Approach’, The First International Conference on Recent Trends in Mechanical Engineering, May 18-19, 2013, Dubai, UAE.

 

62

Asemi, K., Salehi, M., Akhlaghi, M., ‘Three dimensional static analysis of two dimensional functionally graded plates’, The First International Conference on Recent Trends in Mechanical Engineering, May 18-19, 2013, Dubai, UAE.

 

63

Asemi, K., Salehi, M. ‘Three-Dimensional Shear Post-Buckling of Functionally Graded Material Annular Sector Plates, In: Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing, Prague, Czech Republic, 1 – 4 September, (2015).

 

64

Salehi, M., Azari Barzandigh,  ‘A ‘Reliability based Maintenance’ Model for Industrial Gas Turbines in Natural Gas Transmission Process with Life Extension Prospects’ In: Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing, Prague, Czech Republic, 1 – 4 September, (2015).

 

 

SEMINARS

 

·         Dynamic Relaxation Method, Islamic Azad University, Tehran, Iran, Summer, 2001

·         Fibre-reinforced laminated plates and Dynamic Relaxation Method, School of Civil, Mining and Environmental Engineering, Faculty of Engineering, University of Wollongong, Australia, November 2005.

 

 

 

 

 

 

 

 

VOLUNTARY CONTRIBUTIONS

 

Reviewer for the following national and international journals and conferences:

 

·         International Journal of Computational and Applied Mathematics, Elsevier publication

·         International Journal of Computers and Structures, Elsevier publication

·         International Journal of Solids and Structures, Elsevier publication

·         International Journal, Materials Science and Engineering A, Elsevier publication

·         International Journal of Mechanics Research Communications, Elsevier publication

·         International Journal of Engineering Sciences, Iran University of Science and Industry publication, Iran

·         Amirkabir Research Journal, Amirkabir University of Technology publication, Iran

·         Iranian Society of Mechanical Engineering Conferences

·         International Journal of Non-Linear Mechanics, Elsevier publication

·         WSEAS (The World Scientific and Engineering Academy and Society) Conferences