E-mail Mohammad Reza Eslami, Professor
 Mechanical Engineering Department

Amirkabir University of Technology (Tehran Polytechnic), Hafez Ave.
Tehran 15914 Iran
Phone: (021) 640-5844, Fax: (021) 641-9736

EDUCATION
High School : Math. Dip., Hadaf No.1, Tehran Iran, 1963
B.Sc. : Mech Eng., Tehran Polytechnic, Iran, 1968
M.Sc. : Mech Eng., Louisiana State University,
Baton Rouge La., . USA, 1970
Ph.D : Mech Eng., Louisiana State University,
Baton Rouge La., USA, . 1973

EMPLOYMENT:

- Louisiana State University, teaching assistant, Mech Eng., 1969-1970
- NASA-LSU space shuttle team project through Manned Spacecraft Center in Houston, Research Assistant and later Associate Research, 1970-1973
- Amirkabir University of Technology, Assistant Professor Mech. Eng., 1973-1977
- Louisiana State University, Associate Professor, Mech. Eng. Dept., 1977
- Amirkabir University of Technology, Associate Professor 1978-1989; Professor since 1989
- Consultant, Ministry of Defence, 1983-1991
- Chairman, Engineering section, Academy of Sciences of Iran, 2003-2005.

 

CONSULTING:

  Major consulting projects are:

1 - Farmanfarmaian Consulting Engineering (Kamiran), consulting on Neka thermal power   plant, 1974.

2 - Jovan Consulting Engineering, 1- Design of hot crude oil pipeline of Abbadan-Mahshahr. 2- Pipeline cost optimization to Ahwaz and Marrun area related to the gas injection project.   1975.  

3 - Iran Delta Consulting Engineering, Sabzevar-Mashad pipeline: 1- Hydraulic gradient analysis, 2- Pressure surge analysis. 1976.

4 - Vazne Engineering, Design of moving cranes with span of 5 to 30 meters and 0.5 to 50 tons capacity. A computer code was developed based on AISC code to design the cranes of box construction, 1981.

5 - Feasible Consulting Engineering, Pipeline flexibility analysis of Gachsaran Compressor Station Number 2, 1984.

6 - Machine Sazi Arak, Design of natural gas transport pressure vessels (based on DOT and ASME Sec. VIII, Div. 1), 1986.

7 - Ghods Niru Consulting Engineering, Rasht Industrial city combined power plant project. Joint work with Siemens (of Germany) to overcome the design problems of the power plant    structures. The ASME Sec.VIII Div. 2 was used. 1992-1993.

8 - Consulting for Tavanir to overcome turbine problems  manufactured and installed by Mitsubishi (of Japan) in Shahid Rajai and Gharb power plants. 1994.

9 - Arak oil refinary, redesign of the distillation tower due to catastrophic failure, 1995.

10 - Tehran oil refinary, redesign of the distillation  tower to bear new function. 1997.

11 - Tehran oil refinary, redesign of the stabilized  column due to the catastrophic failure, 2006.

    
SOCIETY MEMBERSHIP:

ASME Fellow; American Society of Mechanical Engineers 
AIAA Associate Fellow; American Institute of Aeronautics & Astronautics
Member; Society for Design and Process
Science (SDPS)
Member; Iranian Society of Mechanical Engineers

Who's Who:

- MARQUIS Who's who ; Biography appeared in:
Who's who in Engineering & Science, 1992
Who's who in the World, 1998
Who's who in Finance and Industry, 1988
- American Biographical Institute ; Biography appeared in: International Who's Who of Contemporary Achievement.
- International Biographical Center, Cambridge ;
Biography appeared in:
Dictionary of International Biography, 27 Ed.
International Who'sWho of Intellectuals, 13 Ed.
-Rifacimento Int.,New Delhi, India;Biography appeared in:Asian/American Who's who, Vol. III
-Asian's Who's Who of Men and Women of   Achievement,2003.

 

RECOGNITION AND AWARDS:

- ASME Fellow member
- AIAA Associate Fellow member
- Fellow Iran Academy of Science,
Head of mechanical engineering branch (1992-95),Chairman of Engineering section (2003..)
- National Secretary of the
ISME Honor members committee.
- Distinguished Professor ; Amirkabir University of Tech
1991, and 1997,2002
- ASME 1994 Award Plaque, American Society of Mech. Eng.
(ASME), ASME-ESDA Conf. London, July 1994
- ISME 1996 Plaque recipient, National distinguished
Professor
- ASME 1996 Award plaque ASME-ESDA conf. Montpellier, France, July
1996
- ASME honorarium of US$500, for US Chair for Computational Mechanic
Symposium, ASME-ESDA Conf. Monpellier, France, July 1996
- 1998 ESDA Award PLaque, Society for Design and Process
Science, Third World Conference on Integrated Design and Process Tech.,
1998, Berlin, Germany.
- ASME Award PLaque, American Society of MechanicalEngineers,
Petroleum Div., ESDA 2000 Conference, Montreux, Switzerland, July 10-13,2000.
- ASME Petroleum Div. Medal, American Society of
Mechanical Engineers, Petroleum Div., ESDA 2000 Conference, Montreux,
Switzerland, July 10-13, 2000.
-Nationally distinguished researcher, Ministry of Higher Education,
Islamic Republic of Iran, 2002.
-Nationally distinguished Professor, Ministry of Higher Education, Islamic Republic of Iran, 2003.

       


EDITORIAL BOARD OF JOURNALS AND CONFERENCES

- Editor-in-Chief, Transactions of Iranian Society of Mech. Eng.
- Board of Editor, Journal of Theraml Stresses, Taylor &
Francis, New York.
- Board of Editor, Journal of Engineering, Ministry
of Science & Higher Education, Islamic Republic Iran
- Board of Editor, Amirkabir Journal of Engineering,
Amirkabir University of Technology
- Board of Editor, Scientia Iranica. Sharif Univ. of
Tech., Tehran.
- Conference Chairman, 3rd. Azarab Industries Conf.
on Pressure Vessel Technology, Sept. 1992
- Conference Chairman, 1st. Winter Annual Conference
Iranian Society of Mechanical Engineers, Feb. 1993,
Member of Scientific Committee of 2nd ISME-1994, Chairman
of Scientific Committee of 3rd ISME-1995.
- ASME-ESDA European Conference, Program Committee
member, 1994, London
- U.S. Chairman of Computational Mechanic Symposium, ASME-ESDA96
Montpellier, France, July 1-4, 1996
- Program Committee member, The Third World Conference on Integrated
Design and Process Technology, Society of Design & Process Science Joint conf
with ASME-ESDA, 1998, Berlin, Germany
- ASME-ESDA European Conference, Program Committee
member and chairman of Solid Mechanics Symposium, Montreux, Switzerland,
July 10-13, 2000.
- ASME-ESDA European Conference, Program Committee
member and chairman of Solid Mechanics Symposium, Istanbul, Turkey,
July, 2002.
- Reviewer, Int. J. Solid and Structure, U.S.A
- Reviewer, Tran. ASCE, J. Engineering Mech., U.S.A
- Reviewer, Tran. ASME, J. Applied Mech., U.S.A
- Reviewer, International J. of Mechanical Sciences, UK
- Int. J. Pressure Vessel and Piping, UK.
- Structural Engineering and Mechanics, An Int. J.,South Korea
- Mechanics, Research Communications, Basic and Applied, USA
- Reviewer, AIAA J., U.S.A

     - Board of Editor, International Journal of Mechanics and Solids,

     Delhi, India.

       
COURSES TAUGHT:

Undergraduate :

1- Dynamics
2- Kinematics
3- Advance Dynamics
4- Vibration
5- Machine Design 1
6- Machine Design 2
7- Advance Strength of Mat.
8- Instrumentation
9- Advance Fluid Mech.
10-Orbit Mechanics
11-Advance Fluid Mech.
 

Graduate:

1- Plasticity
2- Thermoelasticity
3- Finite Element 1
4- Finite Element 2
5- Theory of Plates
6- Continuum Mechanics
7- Advance Dynamics
8- Numerical Analysis
9- Stability, Dynamic sys.
10-Elasticity

 

Professional Courses:

1- ASME Pressure Vessel Code Sec.VIII, Div. 1
2- ASME Pressure Vessel Code Sec.VIII, Div. 2
3- Piping Flexibility Analysis, & ASME B31

Books; International:

1- Editor: " Design: Analysis, Synthesis, and Application, Vol. C "
Pub. ASME, New York, 1994
2- Co-Editor: " Design: Analysis, Synthesis, and Application, Vol. A"
Pub. ASME, New York, 1994
3- Co-Editor: " Design: Analysis, Synthesis, and Application, Vol. B"
Pub. ASME, New York, 1994
4- Editor: " Computational and Thermomechanic, Proc. ASME-ESDA conf.
ASME, New York, 1996
5 - Co-Editor: " General Design Analysis, Considerations and
Applications - Education. , Vol. 6, SDPS, Texas, 1998.
6- Author: Theory of Thermoelasticity, (in english), to be
published by Amirkabir Univercity Press.
7 -Author: A First Course in Finite Element Analysis, (in English), Amirkabir University Press,2003
8 - Co-Author with Professor R. B. Hetnarski, Rochester Inst. of Tech., New
York, Thermoelasticity and Creep, Soon to be published, Lastran Corp. New
York.


CONFERENCE PUBLICATIONS

1 - Eslami, M.R., Wind Tunnel Balance System for Determination of Wind Induced Vibrations of a Rigid Shuttle Model in the Lunch Configuration ", Presented to NASA- Manned Spacecraft Center in Houston, NASA Contract No.NAS-9-10464, 1971

2 - Eslami, M.R., Booster Water Impact, Analytical and Numerical Studies (Space Shuttle Project ) ", Presented to NASA Houston Space Center, NASA Contract No.NAS-9-12352, 1973

3 - Sabbaghian, M., Eslami, M.R., Creep Relaxation of Axisymmetric Thermal Stresses in a Thick Walled Cylindrical Pressure Vessel " ASME Paper No. 74-PVP-9, June 1974

4 - Eslami, M.R., Creep Analysis of Spherical Vessels Subjected to Inside Pressure and Radial Temperature Variations ", Proceedings, Int. Conf. Nonlinear Mech. Shanghai, China, Oct. 28-31, 1985

5- Eslami, M.R., Salehzadeh, A., Application of Galerkin Method to Coupled Thermoelastic Problems ", Proc. 5th Int. Modal Analysis Conf.,London, England, April, 6-9, 1987

6- Eslami, M.R., Loghman, A., Thermoelastic-Plastic-Creep Analysis of Thick Cylindrical Pressure Vessels of Strain Hardening Materials", Proceedings, ASME-PVP Conf., Honolulu, Hawaii, July 23-27, 1989

7- Eslami, M.R., Vahedi, H. , A Galerkin Finite Element Formulation of Coupled Thermoelasticity Spherical Problems", Proceedings, ASME-PVP Conf., Honolulu, Hawaii, July 23-27, 1989

8- Eslami, M.R., Tafreshi, A., Thermoelastic-Plastic Analysis of Beams, Proceedings, Int. Conf. of Constitutive Laws in Engineering Materials, Chongqing, China, Aug. 10-13, 1989

9- Eslami, M.R., Yazdan, M.R., Salimi, E., Elastic-Plastic-Creep Analysis of Thick Cylinders and Spheres of Strain Hardening Materials , Proceedings, Int. Congress of Applied Mech., Beijing, China, Aug.21-25, 1989

10- Eslami, M.R., Pazira, A.B., An Algorithm for The Slip-Line Field of a Strain Hardened Materials ",Proceedings, 3rd. Int. Conf. of Tech.of Plasticity, Kyoto, Japan, July 1-6, 1990

11- Eslami, M.R., A Comparison of Displacement and Stress Formulation in General Dynamic Thermoelasticity Problems Using Galerkin Finite Element ", Proc. CSME Forum 1990, Univ. of Toronto, Canada, June 3-9, 1990

12- Eslami, M.R., Ahmadian, H, Ayatollahi, M.R., Static and Dynamic Finite Element Solution of Plate and Shell of Revolution on Elastic Foundation ", Proceedings, ASME-PVP, Conf, Nashville, TN., June 17-21 1990

13- Eslami, M.R., Alizadeh, S.H., Galerkin Finite Element Formulation of Spherical Shells Under Non-Axisymmetric Loadings ", Proceedings, ASME-PVP Con., Nashville, TN, June 17-21, 1990

14- Eslami, M.R., Shariyat, M., An Isoparametric Finite Element Solution of Shell of Revolution on Elastic Foundation ", Proceedings, Int. Conf. on Computational Science, Melbourne, Australia, 12-16 Aug., 1991, Pub. Springer Int.

15- Shakeri, M., Eslami, M.R., Babai, R., Galerkin Finite Element of Cylindrical Shells Under Impact Loads ", Proceedings, Sixth Int. Conf. in Australia on Finite Element Method, Sydney, July 8-10, 1991

16- Eslami, M.R., Ayatollahi, M.R., Dynamic Analysis of Shell of Revolution by Modal Analysis ", Proceedings, ASME-PVP Conf., San Diego, CA, June 23-27, 1991

17- Eslami, M.R., Shariyat, M. The Primary and Secondary Stresses in Pressure Vessels ", Proceedings, ASME-PVP Conf., San Diego, CA, June 23-27, 1991

18- Eslami, M.R., Shariyat, M., em Elasto-Plastic Buckling of Cylindrical Shells, Proceedings, ASME Joint European Conf. on Engineering System Design and Analysis, Istanbul Turkey, June 29-July 3, 1992

19- Eslami, M.R., Shariyat, M., A Variational Approach to Buckling of Cylindrical Shells ", Proceedings,7th. Int. Conf. on Pressure Vessel Tech., Dusseldorf, Germany, May 31-June 5,1992

20- Eslami, M.R., em A Note on Finite Element of Coupled Thermoelasticity, Proceedings, Int. Conf. on Engineering Application of Mech., Sharif University of Tech., Tehran Iran, June 9-12, 1992

21- Eslami, M.R., Sajedi, A.R., Haghdoost, P., Application of Weighted Residual Method to Shells ", Proceedings, Int. Conf. on Engineering Application of Mech., Sharif University of Tech., Tehran, Iran, June 9-12, 1992

22- Eslami, M.R.,Shakeri, M., Sedaghati, R., Thermal Stress Waves in Cylindrical Shells ", Proceedings, ASME-PVP Conf., New Orleans, LA, June 21-25, 1992

23- Eslami, M.R., Ziaii, A.R., Thermal Buckling of Cylindrical Shells ", 3rd Conf. of Pressure Vess.
& Boilers, Azarab Industries, 10-12 Shah., Arak 1371 (1992), (in Persian).

24- Shakeri, M., Eslami, M.R., Ghassaa, M., A Review of Linear Shell Theories; Analysis of Cylindrical Shells Under Internal Pressure Shock ", 3rd Conf. of Pressure Vessel & Boiler, Azarab Ind., 10-12 Shah., 1371 (1992), (in Persian).

25- Eslami, M.R., Ghorbanpour, A., Thermal Buckling of Ring and Stringer Stiffened Cylindrical Shell " 3rd Conf of Pressure Vessel & Boiler, Azarab Ind. 10-12 Shah., 1371 (1992), (in Persian).

26- Shakeri, M., Eslami, M.R., Babai, R., Elastic Analysis of Conical Shells Under Impact Loads ", Proceedings, Int. Congress, on Computational Meth.in Engineering, May 3-6, 1993, School of Engineering Shiraz University, Iran

27- Eslami, M.R., Nakhaie-Jazar, G., Series Solution of General 3-Body Problem ", Proc. ICNM II, Aug. 23-26, Beijing, China, 1993

28- Shakeri, M., Eslami, M.R., Ghassaa, M., Cylindrical Shell Under Impact Loads Including Transverse Shear and Normal Stress ", Proceedings, 12 th.Int. Conf. on Structural Mechanics in Reactor Tech. Stuttgart, Aug. 15-20, 1993, Germany

29- Shakeri, M., Eslami, M.R., Ohadi, A.R., Analysis of Cylindrical Shells Under Dynamic Load Including Transverse Shear; A Comparison of Different Theories, Proceedings, Winter Annual Conf., Iranian Society of Mech. Eng., 24-29 Bah., 1371 (1993), (in Persian).

30- Shakeri, M., Eslami, M.R., Yas, M.H., Analysis of Cylindrical Shells Under Dynamic Load: Comparison of Different Theories ", Proceedings, Winter Annual Conf., Iranian Society of Mech. Eng., 24- 29 Bah., 1371 (1993), (in Persian).

31- *** ( Invited Lecture ) *** Eslami, M.R., A Review on Finite Element and Boundary Element Methods ", Proc. National Conf. on Manufacturing Methods, Tehran Polytechnic, Mehr, 1372 (1993), (in Persian).

32- Saffar-Avval, M., Damangir, E., Eslami, M.R., Sorooshe, A.A., "em Finite Element Formulation of Blood Flow in Bifurcation of Femoral Artery to Predict Atherosclerosis Plaque Formation "Proc. ASME-ESDA 1994 Conf.London.

33- Eslami, M.R., Shakeri, M., Yas, M., Ohadi, A., The Influence of Transverse Shear Deformation and Normal Stress and Comparison of Different Theories ", Proc. ASME-ESDA 1994 Conf., London

34- Shakeri, M., Eslami, M.R., Yas, M., Analysis of Thin Spherical Shell Under Dynamic Load Involving Transverse Shear Deformation ", Proc. ASME-ESDA 1994 Conf., London.

35- Eslami,M.R., Bakhtiary-Nejad, F., Ghassemi, M.R., " em Experimental Modal Analysis of Tail Vibration ",Proc., Vol.1, 2nd ISME Conf., Sharif Univ. of Tech., May 2-5, 1994, Tehran, (in Persian).

36- Eslami, M.R., Rafeeyan, M., Thermal Buckling of Conical Shells ", Proc. Vol.1, 2nd ISME Conf., Sharif Univ., May 2-5, 1994, Tehran, (in Persian).

37- Eslami, M.R., Shakeri, M., Yas, M.H., Analysis of Cylindrical Shells With Viscoelastic Layer ". Proc. Vol.2, 2nd ISME Conf., Sharif Univ., May 2-5, 1994,Tehran, (in Persian).

38- *** (Keynote Speaker)*** Eslami, M.R., Shakeri, M., Ohadi, A.R., Coupled Thermoelasticity
of Shells ", Proc. Thermal Stresses-95 Conf., Japan, June 4-7, 1995.

39- Shakeri, M., Eslami, M.R., Yas, M.H., Three Dimensional Free Vibration Analysis of Orthotropic Multiplier Cylindrical Shells ", Proc. 3rd ISME Conf. Tehran Polytechnic, Spring 1995, (in Persian).

40- Shakeri, M., Eslami, M.R., Yas, M.H., Three Dimensional Elasticity Solution of Orthotropic
Multiplier Cylindrical Shells Under Impulsive Load " , Proc. 3rd ISME Conf. Tehran Polytechnic, Spring 1995, (in Persian).

41- Geramipanah, F., Eslami, M.R., Memarian, M, Ghodrati, H., A Three Dimensional Finite Element of Maxilofacial Prosthesis Patients " , Proc.3rd ISME Conf., Tehran Polytechnic, Spring, 1995, (in Persian).

42- *** Keynote Speaker *** Eslami, M.R., Stress Classification, A New Design Concept ", Proc. 3rd ISME Conf., Tehran Polytechnic Spring, 1995, (in Persian).

43- Eslami, M.R., Shakeri, M., Shiari, B., Dynamic Analysis of Composite Shells of Revolution Under Blast Loads ", Proc. Symposium on Shell Analysis, Gillan University, Rast, Iran, June, 1995, (in Persian).

44- Eslami, M. R., Rafeeyan, M., Thermal and Mechanical Buckling of Conical Shells ", Proc. 8th Int. Conf.of Pressure Vessel Tech. Montreal, Canada, 1996.

45- Eslami, M.R., Shakeri, M., Shiari, B., Coupled Thermoelasticity of Composite Cylindrical Shells ", Sub. ASME-ESDA96 Conf., France, July July 1-4, 1996.

46- Yas, M.H., Shakeri, M., Eslami, M.R., Elasticity Solution For Laminated Orthotropic Cylindrical Shells Under Dynamic Local Patch Load ", Sub., ASME-ESDA96, Conf. France, July 1-4, 1996.

47- Damangir,E., Mehdinejad, V., Marivani, M., Eslami, M.R.Saffar-Avval,M. Numerical Solution of Pulsatile Blood Flow in a Bifurcation With Elastic Wall " Proc., ASME-ESDA96 Conf., France, July 1-4, 1996.

48- Eslami, M.R., Shariyat, M., Mirzazare, , Cyclic Loading of Thick Cylinder of Isotropic Hardening ", Proc. Int. ISME Conf., Univ. of Shiraz, May 1996.


49- Shakeri, M. Eslami, M.R, Yas, M.H., Three Dimensional... ", Proc. Int. ISME Conf., Univ. of Shiraz, May 1996, (in Persian).

50- Shakeri, M., Eslami, M.R., Fariborz, S.,Yas. M.H., Analytical Elasticity Solution for Laminated Orthotropic Cylindrical Shell Under Impulse ", Proc. The Third Asian-Pacific Conference on Computational Mechanics (APCOM'96), Seoul, Korea, Sept.16-18, pp. 1591-1596, 1996

51- Shakeri, M., Eslami, M.R., Fariborz, S., Yas. M.H.,  Three -Dimensional Vibration of Orthotropic and Cross-Ply Laminated Cylindrical Shells With Clamped Ends, Proc. The Third Asian-Pacific Conference on Computational Mechanics (APCOM'96), Seoul, Korea, Sept.16-18, pp. 1647-1652, 1996
 

52- Eslami, M.R., Shakeri, M., Shiari, B., Coupled Thermoelasticity of Composite Spherical Shells ", Proc., SMiRT 14, Aug.17-22, Lyon, France, 1997

53- Eslami, M.R., Shiari, B., Yousefzadeh, A., Eslami, H., Thermal Stresses of Laminated Composite Plates and Shells ", Proc. Thermal Stress 97, Rochester, N.Y., 1997

54- Eslami, M.R., Yousefzadeh Naghdi, A., Shiari,B., Thermo-elastic Analysis of Composite Beams Using Layer wise Theory.1st National Aeronautics & Astronautics Conf. Amirkabir Univ.
Tech., Dec. 31-Jan1, 1997, (in Persian).

55- Eslami, M.R., Shiari, B., Yousefzadeh Naghdi,em Thermoelastic Analysis of composite Cylindrical Shells Based on Layerwise Theory 1st National Aeronautics & Astronautics Conf. Amirkabir Univ. Tech., Dec.31-Jan1, 1997, (in Persian).

56- Eslami, M.R., Nayebi, A., Analysis of Thermal and Mechanical Cyclic Loading of Beams Based on Nonlinear Kinematic Hardening" ISME Annual Conf., May 1997, Tabriz, Iran, (in Persian).

57- Eslami, M.R., Yousefzadeh Naghdi, A., Shiari, B., Dynamic Analysis of Thermal Stresses in Thick Multi layer Beams Using Layer wise Theory ", ISME Annual Conf., May 1997, Tabriz, Iran, (inPersian).

58- Yas, M.H., Shakeri, M., Eslami, M.R., "em ISME Annual Conf., May 1997, Tabriz, Iran, (in Persian).

59 - Eslami, M.R., Shahsiah, R., "em Thermal Buckling of Imperfect Thin Cylindrical Shells , Proc. ISME, Annual conf. Tehran May 1998, (inPersian).

60 - Eslami, M.R., Yousefzadeh Naghdi, A. , Shiari, B. Static Analysis of Thermal Stresses in Thick Multi layer Plates Using Layer wise Theory ", ISME Annual Conf., May 1998, Tehran, Iran. (in Persian).

61 - Eslami, M.R., Rastegar-Agah, em Coupled Thermoelasticity of Composite Plates Using Third Order Equivalent Single Layer Theory " ISME Annual Conf., May 1998, Tehran, Iran, (in Persian).

62- Shakeri, M., Eslami, M.R., Yas, M.H., Kashani, M., "em Dynamic Analysis of Laminated Orthotropic Hemispherical Shells", Proc. 3rd. Int. Conf. on Modern Practice in Stress and Vibration Analysis, Dublin, Ireland, Sept. 3-5, pp. 497-501, 1997.

63- Shakeri, M., Eslami, M.R., Alibiglu, A., Dynamic Analysis of Thick Laminated Anisotropic Cylindrical Panel", Under review, The 6th. Asian-Pacific Con. on Structural Eng. & Construction., Taipei, Taiwan, Jan. 14-16, pp. 719-725, 1998.

64- Eslami, M.R., Tehrani, P.,"em Two Dimensional Time Harmonic Thermoelasticity Analysis and Design by BEM Formulation, Abstract submitted to 3rd World Conf. Integrated Design & Process Tech., Berlin, Germany, July 6-9, 1998.

65- Shakeri, M., Eslami, M.R., Alibiglu, A. em Elasticity Solution for Laminated Anisotropic Cylindrical Panel Under Impulse, Proc. 1 st. Asian-Australasian Cof. on Composite Materials (ACCM-1), October 7-9, Osaka, Japan, pp. 746-1 - 746-6, 1998.

66- Shakeri, M., Eslami, M.R., Alibiglu, A. em Dynamic Analysis of Orthotropic and Cross-Ply Thick Laminated Cylindrical Panels , Proc. Int. Conf. Computational Structures Tech., Heriot-Watt Univ., Edinburgh, UK, Aug. 18-20, 1998.

67- Eslami, M.R., Tehrani, P.,"em Propagation of Thermoelastic Waves in a Two Dimensional Domain, Proc. 3rd. Int. Con." Thermal Stresses 1999", June 13-17, 1999, Krowcow, Poland.

68- Hetnarski, R.B., Hector, Jr., L.G., Tehrani, P.H., and Eslami, M.R., em Thermal Stresses Due to Laser Pulse, Coupled Solution,Proc. 3rd. Int. Con." Thermal Stresses 1999", June 13-17, 1999, Kracow, Poland.

69- Eslami, H., Mizuno, M., and Eslami, M.R., em Thermal Postbuckling with Shear Deformation Effect of Composite Beams Using a 20 DOF, Proc. 3rd. Int. Con." Thermal Stresses 1999", June 13-17, 1999, Kracow, Poland.

70- Tehrani, P.H., Eslami, M.R., Daghyani, H., em Fracture Evaluation of Cracked Bodies Under Thermal Shock, Proc., ASME-ESDA 2000 Conf., Switzerland.

71- Eslami, M.R., Mossavarali, A., and Saheli, G.P., em Thermoelastic Buckling of Isotropic and Orthotropic Plates, Proc, ASME-ESDA 2000 Conf., Switzerland.

72- Reisi-Najafi, A., Eslami, S., Shams, I., and Eslami, M.R., em Relative Rigidity of External Fixator During Calus Developement,Proc, ASME-ESDA 2000 Conf., Switzerland.

73- *** (Keynote Speaker)*** Naderan-Tahan, K., Eslami, M.R., and Mahbadi, H., em Cyclic Loading Analysis of Structures of Strain Hardening Material, Proc, ISME2000 Conf., Sharif Univ. of Tech., Tehran, 2000. (in english).

74- Eslami, M.R., and Abedi, M.R., em Thermoelastic Buckling of Composite Conical Shells, Proc., ISME2000 Conf., Sharif Univ. of Tech.,Tehran, 2000, (in Persian).

75- Shakeri, M., Eslami, M.R., Yas, M.H., Alibiglu, A., and Barzekar A.R., em A Galerkin Finite Element Dynamic Analysis of Multilayer Composite Cylindrical Shells, Proc., IASS-IACM 2000, 4th. Int.Colloquium on Computation of Shell and Special Structures, Chania-Crete, Greece, June 4-7, 2000.

76- Shakeri, M., Eslami, M.R., and Alibiglu, A. em Dynamic Analysis of Multilayer Anisotropic Shallow Cylindrical Panels, Proc., IASS-IACM 2000, 4th. Int. Colloquium on Computation of Shell and Special Structures, Chania-Crete, Greece, June 4-7, 2000.

77 - Majd. A.G., Najafi, A.R., Eslami, M.R., and Shams, I, em Numerical Stress Analysis of External Fixators Used on Tibia-Rigidity versus Design Parameters, Proc., 12 th. Conf. European
Society of Biomechanics, Aug. 27-30, Dublin, Ireland, 2000.

78 - Tehrani, P.H., Hector, L., Hetnarski, R.B., and Eslami, M.R., em Boundary Element Analysis of Lord and Shulman Theory due to a laser Pulse Train Heating, Proc., Thermal Stresses 2001
conf., Osaka, Japan, June 8-11, 2001.

79 - Javaheri, R., and Eslami, M.R., em Buckling of Functionally Graded Platers Under Uniform Temperature Difference, Proc., Thermal Stresses 2001 conf., Osaka, Japan, June 8-11,2001.

80 - Shahsiah, R, and Eslami, M.R., em Thermal Buckling of Imperfect Spherical Shells, Proc., Thermal Stresses 2001 conf. , Osaka, Japan, June 8-11, 2001.

81 - Javaheri, R, and Eslami, M.R., em Determination of Equilibrium and Stability Equations for Functionally Graded Plates Based on Higher Order Theory, Proc., ISME Conf., Gillan Univ., May
2001.

82 - Eslami, M.R., and Mahbadi, M.H., em Load and Deformation Controlled Cyclic Loadings, Proc., Thermal Stresses 2001 conf. , Osaka, Japan, June 8-11, 2001.

83 - Najafizadeh, M.M., Zakerzadeh, A., and Eslami, M.R., em Thermoelastic Stability of Isotropic Homogeneous Circular Plates,Proc., ISME Conf., Gillan Univ., May 2001.

84 - Shakeri, M., Eslami,. M.R., and Alibiglu, A., em Dynamic Analysis of Multilayer Anisotropic Shallow Cylindrical Panels Under Thermal Load, Proc. EASEC-8, Singapore, Dec. 5-7, 2001.

85 - Jabbari, M., Sohrabpour, S., and Eslami, M.R., em General Solution of Mechanical and Thermal Stresses in Isotropic Hollow Cylinder Due to Asymmetric Loads, Submitted for presentation, ASME-ESDA conf. Istanbul, Turkey, July 2002.

86 - Mohammadi, R., and Eslami, M.R., em Coupled Thermoelasticity of Laminated Composite Plates, Submitted for presentation, ASME-ESDA conf., Istanbul, Turkey, July 2002.

87 - Davami, P., Ghaderi, R., Mohammadi, R., and Eslami, M.R., em Transfinite Element Analysis of Two-Dimensional Generalized Thermoelasticity Based on GL Model, Submitted for presentation, ASME-ESDA, conf., Istanbul, Turkey, July 2002.

88 - Safari, R., Mahbadi, H., and Eslami, M.R., em On Classification of Bree Stresses, Submitted for presentation, ASME-ESDA, conf., Istanbul, Turkey, July 2002.

89 - Javaheri, R., and Eslami, M.R., em Determination of Equilibrium and
Stability Equations for Functionally Graded Plates Based on General
Higher Order Theory, ISME10, KNT University, Tehran, 2002.

90-Shakeri, M., Eslami, M.R., and Alibiglu, A.,Elasticity Solution for Thick Laminated Circular Cylindrical Panels Under Dynamic Patch Load, Proc. 1st. Int. Conf. on Advances in Structural Eng. and Mech., Vol. 2, Aug. 23-25, Seoul, Korea, 1999.

91- Shakeri, M., Eslami, M.R., and Alibiglu, A., Elasticity Solution for Thick Laminated Shallow Circular Cylindrical Panels Under Dynamic Patch Load, Proc., The Second Asian-Australian
Conf. on Composite Materials (ACCM), Vol. II, Aug. 18-20, Kyongiu, Korea, 2000.

92 - Mahbadi, H., and Eslami, M.R., Bree Diagram for Cyclic Loading of Beams Based on the Chaboche Kinematic Hardening Model, Submitted for presentation, ASME-ESDA, conf.,Istanbul,
Turkey, July 2002.

93 - Shahsiah, R., and Eslami, M.R., Thermal Instability of Rings made of Functionally Graded Materials, Accepted for presentation, ASME-ESDA Conf., Istanbul, Turkey, July 2002.

94 - Taheri, H.A., Fariborz, S., and Eslami,M.R., Solution of Generalized Coupled Thermoelasticity of a Layer Based on Green-Naghdi Model, ISME10, KNT University, Tehran,2002.

95 - Shakeri, M., Eslami, M.R., and Alibiglu,A, Dynamic Analysis of Multilayered Anisotropic Cylindrical Panels Under Thermal Load,Proceedings, Fourth Int. Conf. on Composite Science
and Tech.,Durban, South Africa, Jan. 21-23, 2003.

96 - Eslami, S. and Eslami, M.R., Static Analysis of Euler-Bernoulli Beams with Piezoelectric Layer for the Lateral Deflection Control, 5th. Iranian Manufacturing Engineering Conf.,Amirkabir Univ. of Tech., Beb. 17-20,2003.

97 - Agha-Ebrahimi, M., and Eslami, M.R.,Static and Dynamic Analysis of  Thermoiezoelectric Euler-Bernoulli Beams, 5th. Iranian Manufacturing Engineering Conf.,Amirkabir Univ.of Tech., Beb. 17-20,2003.

98 - Bagri, A., and Eslami, M.R., Generalized Thermoelasticity  of Layers, 4th. Iranian Aerospace Conf.,Amirkabir Univ. of Tech.,2003.

99 - Mahbadi, H., and Eslami, M.R., Load and Deformation Controlled Cyclic Loading of Thick Vessesls, Submitted for review,ICPVT-10, Vienna Univ. of Tech., Austria,July 7-10, 2003.

100 - Shahsiah, R. and Eslami, M.R.,  Axisymmetric Mechanical Buckling of Functionally Graded Cylindrical Shell Based on Timoshenko Technique,Submitted for review, ICPVT-10,
Vienna Univ. of Tech., Austria, July 7-10,2003. 

101 - Mahbadi, H., and M.R. Eslami,Elastic-Plastic-Creep Cyclic Loading of Thick Pressure Vessels Based on the Frederick-Armstrong Kinematics Hardening Model, Proc.,SMiRT 17, Czech Republic, August 17-22, 2003.

102 - Heidary, F., and M.R. Eslami, Dynamic Analysis of Coupled Piezothermoelastic Composite Plate Using First-Order Shear Deformation Theory, Proc., SMiRT 17,Czech Republic, August 17-22, 2003.

103 - Mahbadi, M.H., and Eslami, M.R., Residual Stresses Caused by Thermal Loading of Thick Walled Spherical Vessels, Proc. ISME,Tarbiat Moddarres Univ., May 2004.

104 - Javaheri, R. and Eslami, M.R., Buckling of Functionally  Graded Plates under In-Plane Compressive Loading Based on Various Plate Theories, Proc. ISME,Tarbiat Moddarres Univ., May 2004.

105 - Heidari, F., and Eslami, M.R., Dynamic Behavior of Distributed Piezoelecteric Composite Plate under Heat Loading,Proc.Complex Systems,Intelligence and Modern Technology Applications, An International Conference Normandy, France, Sept.19-22,2004.

106 - Mahbadi, M.H., and Eslami, M.R., Residual Stress Analysis of Thick Walled Cylindrical Vessels, Proc.Complex Systems,Intelligence and Modern Technology Applications, An International Conference, Normandy, France,Sept.19-22, 2004.

107 - Mahbadi, M.H., and Eslami, M.R., A Numerical Method for Cyclic Loading Analysis of Beams, Int. Conf. on Computational Methods in Science and Engineering, Greece, Nov. 19-23, 2004.

108 - Eslami, M.R., Fariborz, S., Bagri, A., and Taheri, H., A Comparison of the Generalized Thermoelasticity Theories for a Layer, Submitted for review, 5th. Int. Conf. on Composite Science and Technology, American Univ. of Sharjah, UAE, Feb. 1-3, 2005.

109 - Eslami, M.R. and Bagri, A., Higher Order Elements for the Analysis of the Generalized Thermoelasticity of Disk Based on the Lord Shulman Model,Proc., Int. Conf.on Computational Methods in  Science and Engineering,Greece, Nov.19-23, 2004.

110 - Eslami, M.R. and Javaheri, R., Buckling of Functionally Graded Plates,Proc., Int. Conf. Recent Advances in Composite Materials, Banaras Hindu Univ.Inst. of Tech., Varanasi,India, Dec. 17-19, 2004.

111 - Eslami, M.R., and Samsam, B., Buckling of Functionally Graded Plates under In-plane Compressive Loads Based on the First-Order Plate Theory, Proc. 5th. Int. Con.Composite Science and Tech.,Feb. 1-3, Sharjah, UAE, 2005.

112 - Eslami, M.R., and Bagri, A., Analysis of Machining Tools Made of Functionally Graded Materials, Proc.5th. Int. Con. Composite Science and Tech.,Feb. 1-3, Sharjah, UAE,2005.

113 - Heidari, F., and Eslami, M.R., Dynamic Behavior of Distributed Composite Plate under Heat Loading, Proc.5th. Int. Con. Composite Science and Tech., Feb. 1-3,Sharjah, UAE, 2005.

114 - Eslami, M.R., and Bahtui, A., Coupled Thermoelasticity of Functionally Graded Cylindrical Shells,Proc., Thermal Stresses 2005,Viena, Austria, May 26-29,2005.

115 - Bagri, A., Eslami, M.R., and Samsam-Shariat, A., Coupled Thermoelasticity of Functionally Graded Layer, Proc. Thermal Stresses 2005, Viena,Austria,May 26-29, 2005.

116 - Samsam-Shariat, A., Eslami, M.R., and Bagri, A., Thermal Buckling of Functionally Graded Plates Based on the First Order Plate Theory, Proc.Thermal Stresses 2005, Viena, Austria, May 26-29, 2005.

117 - Heidari, F., and Eslami, M.R., Dynamic Coupled Piezothermoelasticity of Pyroelectric Composite Plate, Proc. 18th. Int. Conf. SMiRT, Beiging,August 7-12, 2005.

118 - Mahbadi, H., Eslami, M.R., and Kamran, M.,Analysis of Rotating; Disks under Cyclic Thermal and Mechanical Loads, Proc., Advanced Problems of Mechanics, 2005,Moscow, Russia, 2005.

119 - Mirzavand, B., and Eslami, M.R., Effect of Imperfection on Buckling of Functionally Graded Cylindrical Shells under Axial Compression, Proc.,ISME, Isfahan, Iran,May 17-19, 2005.

120 - Bahtui, A., Jabbari, M., and Eslami, M.R., Thermal Stresses in Thick FGM Pressure Vessesls, Proc, Int. Conf. \& Exhibition on Pressure Vessel and Piping, OPE 2006, 7-9 Feb. 2006, Chennai, India.

121 - Mahbadi, M.H., Kamran, A., and Eslami, M.R., Analysis of  Rotating Disks under Cyclic Thermal and Mechanical Loads, Proc., Int. Conf.  Exhibition on Pressure Vessel and Piping,    OPE 2006, 7-9, Feb. 2006, Chennai, India.

122 - Farmanzad, F., Najarian, S., Eslami, M.R., and Sadighi, A.S.,Determination the Effect of Intraventricular Pressure on Brain Deformation in Epidural Hematoma,12th. Conference, Iranian Medical Engineering Society. Sahand Tech. Univ., 2005.

123 - Raeisi Najafi, A., Arshi, A.R., Eslami, M.R., Fariborz, S., and Moeinzadeh, M.H.,  Micromechanics Fracture of Haversian Cortical Bone: A System of Singular Integral        Equations, 12th. Conference, Iranian Medical Engineering Society, Sahand Tech. Univ., 2005.

124 - Raeisi Najafi, A., Arshi, A.R., Eslami, M.R., Fariborz, S.,and Moeinzadeh, M.H., Micromechanics Fracture of Haversian Cortical Bone: A Finite Element Method Analysis,        12th. Conference, Iranian Medical Engineering Society, Sahand Tech. Univ., 2005.

125 - Samsam-Shariat, B., and Eslami, M.R., Thermoelastic Stability Analysis of Functionally Graded Plates, Proc. 14th.ISME Annual conf., Isfahan University of Tech., May 2006.

126 - Yeilaghi Tamijani, A., Mirzaeifar, A., Ohadi, A.R., and Eslami, M.R., Active Control of FGM Plates Using Piezoelectric Sensor/Actuator Patches, Proc. 14th.ISME Annual conf., Isfahan University of Tech., May2006.

127 - Yeilaghi Tamijani, A., Mirzaeifar, R., Ohadi, A.R., and Eslami, M.R., Vibration Control of FGM Plate with Piezoelectric Sensors and Actuators using Higher Order Shear Deformation Theory, Proc. ASME-ESDA Conf., Torino, Italy,July 4-7, 2006.

128 - Samsam-Shariat, B., Bagri, A., and Eslami, M.R.,Thermoelastic Stability of Imperfect Functionally Graded Plates Based on the Third Order Shear Deformation Theory, Proc.          ASME-ESDA Conf., Torino, Italy, July 4-7, 2006.

129 - Mahbadi, H., and Eslami, M.R., Cyclic Loading of Thick Pressure Vessels, Proc., 11th. ICPVT, Vancouver,Canada, July 25-27, 2006.

130 - Bahtui, A., and Eslami, M.R., Second Sound Effect  of FG Pressure Vessels: Effective Stiffness Matrix Normalization Method, Proc. Conference on the Mathematics of Finite Element and Applications, Brunel University, West London, 13-16 June, 2006.

131 - Yeilaghi Tamijani, A., Abouhamze, M., Mirzaeifar, R., Ohadi, A.R., and Eslami, M.R., Feedback Control for a Piezo-Laminate Composite Plate, Proc. 8th. Int. Conf. Computational Structures Technology,12-15, Gran Canaria, Spain, 2006.

132 - Shakeri, M., Sedighi, M.R., Daneshmehr, A.R., and Eslami, M.R., A Three-Dimensional Elasticity Solution of a Single Layer Piezielectric Panel, Proc., Eighth Int. Conf.Computational Structural Tech., Gran Canaria, Spain,Sep. 12-15, 2006.

 


Guest Speaches and Lectures

1 - Coupled Thermoelasticity of Plates and Shells, Polish Academy of
Science, (IPPT-PAN), Warsaw, June 22, 1998.

2 - A New Approach to the Numerical Solutions of Coupled
Thermoelasticity, Polish Academy of Science, (IPPT-PAN), Warsaw,
June 26, 1998.

3 - Thermoelasticity with Second Sound Effect, Keynote Speach, ISME
7th Annual National conference, University of Sistan and Baluchestan,
April 16, 1999, Zahedan, Iran.

4 - Cyclic Loading of Structures With Starin Hardening Materisls,
Keynote Speach, ISME2000, The International Conference,
Sharif University of Technology,
May, 2000, Tehran, Iran.

5 - Cyclic Loading Behavior of Thermal Stresses, Invited as "
Principal Keynote Lecturer ", Int. Congress on Thermal Stresses, Osaka,
Japan, June 8-11, 2001.

6 - Cyclic Loading of Load and Deformation Controlled Stresses,
Keynote Lecture, ISME Annual Conference, Gillan Univbersity, June 2001.

7 - The Role of Engineering Societies, Keynote Speech, 6th. Iranian  Manufacturing Conference, Amirkabir Univ. of Tech., 2004.



JOURNAL PUBLICATIONS

1 - Eslami, M.R., em Rectangular Plate on a Variable Modulus Elastic
Foundation Subjected to a Transverse Load Over a Strip,
AIAA Regional Student Competition Conf Dallas, Texas, April 1969,
(Published in Iranian Journal of Science & Tech., Vol. 52, pp. 1-12,
1977)

2 - Sabbaghian M., Eslami, M.R., em Creep Relaxation of
Non-Axisymmetric
Thermal Stresses in a Thick Walled Cylindrical Pressure Vessel,
AIAA Journal, Vol. 12, pp. 1652-1658, Dec. 1974. (1)

3 - Eslami, M.R., em Creep Relaxation of Beam of General Cross Section
Subjected to Mechanical And Thermal Loads, Trans. ASME, J.
Mech., Design, Vol., 100 No. 4, pp. 626-629, Oct. 1978. (2)

4 - Eslami, M.R., em Creep Linearization of Non-Axisymmetrically Heated
Cylinders, AIAA Journal, Vol. 18, No.7 pp. 862-864, July 1980.
(3)

5 - Eslami, M.R., em Creep Relaxation Analysis of Thick
Spherical Vessels Under Internal Pressure and Temperature
Loadings, Amirkabir Journal of Science
and Tech., Vol. 1, No. 2, 1364 (1985)

6 - Eslami, M.R., Vahedi, H., em Coupled Thermoelasticity Beam
Problems, AIAA Journal, Vol. 27, No.5, pp. 662-665, May 1989.
(4)

7 - Eslami, M.R., Vahedi, H., em A General Finite Element Stress
Formulation
of Dynamic Thermoelastic Problems Using Galerkin Method, J.
Thermal Stresses, Vol.14, May 1991.

8 - Eslami, M.R., Vahedi, H., em Galerkin Finite Element Displacement
Formulation of Coupled Thermoelasticity Spherical Problems, Trans.
ASME, Journal of Pressure Vessel Tech. Vol. 14, No.3, PP. 380-384,
1992. (6)

9 - Eslami, M.R., Ayatollahi, M.R., em Modal Analysis of Shells of
Revolution, Int. Journal of Pressure Vessel & Piping,
1993.(7)

10- *** ( Invited Paper ) ***
Eslami, M.R., em Finite Element, Present and Future
Part 1, Trans. Iranian Society of Mechanical Eng.,
Vol.1, No.1, 1371 (1993)

11- *** ( Invited Paper ) ***
Eslami, M.R., em Finite Element, Present and Future
Part 2, Trans. Iranian Society of Mechanical Eng.
Vol.2, No.1, 1372 (1993)

12- Eslami, M.R., Shakeri, M, and Sedaghati, R., em Coupled
Thermoelasticity of
Axially Symmetric Cylindrical Shell, J. Thermal
Stresses, Vol. 17, No.1, pp. 115-135, 1994. (8)

13- *** (Invited paper) ***
Eslami, M.R., Alizadeh, S.H., em Mixed Galerkin Finite Element Analysis
of Non-Axisymmetrically Loaded Spherical Shells, Scientia Iranica,
Vol. 1, No.2, pp. 183-191, 1994

14- Eslami, M.R., Shariyat, M., em A Technique to Distinguish the
Primary and Secondary Stresses, Trans, ASME, Journal of Pressure
Vessel Tech., Vol. 117, pp. 197-203, Aug. 1995. (9)

15- *** (Invited Paper)***
Eslami, M.R., Rafeeyan, M., em Buckling of Truncated Conical Shells
Based on Improved Stability Equations, Asian Journal of Structural
Eng. Vol.1, No.2, pp. 129-148, 1995

16- Eslami, M.R., Shariyat, M., em Third Order Finite Element Analysis
of Shell of Revolution, Int. Journal of Engineering Analysis &
Design, 1995. (10)

17- Eslami, M.R, Ziaii, A.R., Ghorbanpour, A., em Thermo-Elastic Buckling
of Thin Cylindrical Shells Based on Improved Stability Equations,
J. Thermal Stresses, Vol.19, No. 4, PP. 299-316, 1996. (11)

18- Eslami, M.R., Shariyat, M., em Isoparametric Finite Element
Thermoelastic-Plastic Creep Analysis of Shells of Revolution,
Int. Journal of Pressure Vessels and Piping, 1996. (12)

19- Eslami, M.R., Shariyat, M., em Elastic-Plastic and Creep Analysis of
Imperfect Cylinders Under Mechanical and Thermal Loadings,
Trans. ASME, J. Pressure Vessel Tech., Vol. 118, 1996. (13)

20- Eslami, M.R., Jafari, A., Mossavarali, A. em Thermoelastic
Buckling of Ring and Stringer Stiffened Thin Cylindrical Shells,
Trans, ISME, J. of Mechanical Eng., Vol.1, No.1, 1997.

21- Eslami, M.R., Shariyat, M., Shakeri, M.,, em Dynamic Buckling of
Analysis of Composite Cylindrical Shells Under Mechanical Loads Based on
Layerwise Theory, AIAA Journal, Vol. 36, No. 10, pp. 1874-1882.
1998. (14)

22- Tehrani, P., Eslami, M.R., em Two Dimensional Time Harmonic Dynamic
Coupled Thermoelasticity Analysis by Boundary Element Method
Formulation, Journal of Engineering Analysis with Boundary
Element, 22, pp. 245-250. 1998. (15)

23- Shakeri, M., Eslami, M.R.,Yas, M.H., em Elasticity Solution and
Free Vibration Analysis of Laminated Anisotropic Cylindrical
Shells, Structural Eng. and Mechanic, Int. J., Vol. 6,
No. 6, 1998. (16)

24 - Bakhtiary-Nejad, Eslami, M.R., Ghassemi, M.R., em Force Prediction
Analysis by Modal Testing, Int. J. of Science and Tech.,
Vol. 3, Tehran, 1998.

25- Eslami, M.R., Shakeri, M., Shariyat, M., em A High-Order
Theory for Dynamic
Buckling and Post buckling Analysis of Laminated Cylindrical Shells,
Trans, ASME, J.
Pressure Vessel Tech., Vol. 121, Feb. 1998, pp. 94-102. (17)

26 - Shiari, B., Eslami, M.R., em Transfer Matrix for Modeling
Thermoelastic Waves in Multilayered Media, J. Iranian
Mechanical Eng., Vol. 3, pp. 65-71, Fall 1998.

27- Eslami, M.R., Shakeri, M., Ohadi, A.R., Shiari, B. em Coupled
Thermoelasticity of Shells, Effect of Normal Stress,
AIAA Journal, Vol. 37, No. 4, pp. 496-504, 1999. (18)

28- Eslami, M.R., Javaheri, M.R., em Thermal and Mechanical Buckling
of Composite Cylindrical Shells, Journal of
Thermal Stresses, Vol. 22, No. 6, pp. 527-545, Aug. 1999. (19)

29- Eslami, M.R., Shariyat, M., em Dynamic Buckling and Postbuckling
of Imperfect Orthotropic Cylindrical Shells Under Mechanical and
Thermal Loads Based on the Three-Dimensional Theory of Elasticity,
Trans ASME, J, Appl. Mech, Vol. 66, pp. 476-484.
June 1999. (20)

30- Shariyat, M., Eslami, M.R., Discussion on Paper: em Dynamic
Buckling and Postbuckling
of Imperfect Orthotropic Cylindrical Shells Under Mechanical and
Thermal Loads Based on The Three Dimensional Theory of Elasticity,
Trans ASME, J, Appl. Mech, Vol. 66, Dec, 1999. (21)

31 - *** Invited Paper ***
Eslami, M.R., Shiari, B., em Coupled Thermoelasticity With Special
Reference to Shells, Amirkabir Journal of Science and Tech.,
Vol. 11, No. 41, pp. 1-24, 1999.

32 - Shariyat, M., Eslami, M.R., and Shakeri, M., em Elastic-Plastic
Dynamic Buckling
Analysis of Imperfect Cylindrical Shells, Amirkabir
Journal of Science and Tech. Vol. 11, No. 42, pp. 35-46, 1999.

33 - Tehrani, P., Eslami, M.R., em Boundary Element Analysis of Coupled
Thermoelasticity With Relaxation Times in Finite Domain,
AIAA Journal, Vol. 38, No. 3, pp. 534-541, 2000.

34- Eslami, M.R., Shariyat, M., em On Thermal Dynamic Buckling
Analysis of Imperfect Laminated Cylindrical Shells,
ZAMM, Vol. 80, No. 3, pp. 171-182, 2000.

35 - Tehrani, P., and Eslami, M.R., em BEM Analysis of
Thermal and Mechanical Shock in a Two-Dimensional
Finite Domain Considering Coupled Thermoelasticity,
J. Engineering Analysis with Boundary Elementd, 24, pp.
249-257, 2000.

36 - Tehrani, P., and Eslami, M.R., em Boundary Element Analysis of
Green and Lindsay Theory Under Thermal and Mechanical Shocks in a
Finite Domain, J. Thermal Stresses, Vol. 23, No. 8,
pp.773-792, 2000.

37- Eslami, M.R., Mossavarali, A., and Saheli, G.P., em Thermoelastic
Buckling of Isotropic and Orthotropic Plates with Imperfections,
J. Thermal Stresses, Vol. 23, No. 9, pp. 853-872, 2000.

38 - Shakeri, M, Eslami, M.R., and Yas, M.H., em Elasticity Solution of
Laminated Composite Orthotropic Shells Under Blast Load, Accepted,
Transactions, ISME, English edition, 2000.

39 - Eslami, M.R., and Shahsiah, R., em Thermal Buckling of Imperfect
Cylindrical Shells, J. Thermal Stresses, Vol. 24, No. 1, pp.
71-90, 2001.

40 - Shakeri, M. Eslami, M.R., Alibiglu, A., em Dynamic Analysis of
Orthotropic Cylindrical Panel, Transaction, ISME,
Persian edition, Vol. 3, No. 1, pp. 24-33, 1380, 2001.

41 - Tehrani, P., Eslami, M.R., and Daghyani, H.R. em Dynamic Crack
Analysis Under Coupled
Thermoelastic Assumption, Trans. ASME, J. Appl. Mech, Vol. 68,
pp. 584-588, July 2001.

42 - Mossavarali, A., and Eslami, M.R., em Thermoelastic Buckling of
Orthotropic Plates Based on Higher Order Displacement Field,
Scientia Iranica, Vol. 8, No. 2, pp. 149-157, 2001.

43 - *** Invited Paper ***
Eslami, M.R., and Mahbadi, M.H., em Cyclic Loading of Theraml
Stresses, J. Theraml Stresses, Vol. 24, No. 6, pp. 577-603,
2001.

44 - Tehrani, P.H., Hector, Jr., L.G., Hetnarski, R.B., and Eslami, M.R.,
em Thermal Stresses Due to Laser Pulse Train, Coupled Solution,
Trans. ASME, J. Appl. Mech, May 2001.

45 - Alibiglu, A.Shakeri, M., and Eslami, M.R., em Elasticity Solution
for Thick Laminated Circular Cylindrical Shallow and Non-Shallow
Pannels Under Dynamic Loads, Accepted, J. Materials: Design and
Applications, Proc. I.Mech.E, Part L., 2001.

46 - Eslami, M.R., Shakeri, M., and Ghorbani, H.R., em Thermoelastic
Buckling ot Thin Spherical Shells, J.
Thermal Stresses, Vol. 24, No. 12, pp. 1177-1198, 2001.

47 - Alibiglu, A., Shakeri, M., and Eslami, M.R.,
Elasticity Solution for Thick Laminated Anisotropic Cylindrical
Panels Under DynamicLoad, J. Mechanical Eng. Science, Proc.
I.Mech.E, Vol. 216,Part C, pp. 315-324, 2002.  

48- Alibiglu, A., Shakeri, M., and Eslami,M.R., Analysis of
Multi-layered Shallow Panels Under Dynamic Thermal Load Based
on the Theory of Elasticity, Iranian J. Science and Engineering,
Transaction B, Vol. 26, No. B3, pp.441-454, 2002.

49 - Javaheri, R., and Eslami, M.R., Thermal Buckling of
Functionally Graded Plates,AIAA J., Vol. 40., No. 1.,
pp. 162-169,2002.

50 - Javaheri, R., and Eslami, M.R., Buckling of Functionally
Graded Plates Under In-PLane Compressive Loading, ZAMM. 82, 4,
pp. 277-283, 2002.

51 - Mahbadi, M.H., and Eslami, M.R., Load and Deformation
Controlled Cyclic Loading of Beams Based on Isotropic Hardening
Model,ISME Transaction,Vol. 3, No. 1, pp. 28-46, 2002.

52 - Najafizadeh, M.M., and Eslami, M.R.,Thermoelastic
Stability of Circular Plates Composed of Functionally
Graded Materials Based on First Order Theory, AIAA J.,
Vol. 40, No. 7, pp. 444-1450,July 2002.

53 - Shakeri, M., Eslami, M.R., and Alibiglu,A.,Elasticity
Solution of Multi-layered Shallow Cylindrical Panels Subjected
to Dynamic Loading, Steel and Composite Structures,Vol. 2,
No. 3, pp.195-208, 2002.

54 - Shakeri, M., Eslami, M.R.,and Alibiglu,A.,Three-Dimensional
Elasticity Solution of Orthotropic Cylindrical Panels Under Dynamic
Loads, Amirkabir Journal of Science and Tech.,Vol. 13, No. 50,
pp. 242-249, 2002.

55 - Javaheri, R., and Eslami, M.R., Thermal Buckling of Functionally
Graded PLates Based on Higher Order Theory,J. Thermal Stresses,
Vol. 25, No. 7, pp.603-625, 2002.

56 - Mossavarali, A., and Eslami, M.R.,Thermoelastic Buckling of
Plates with Imperfection Based on Higher-Order Displacement Field,
J. Thermal Stresses, Vol. 25, No. 8, pp.745-771, 2002.

57 - Najafizadeh M.M. and Eslami M.R,Thermoelastic Stability of
Orthotropic  Circular Plates,  J. Thermal stresses, Vol. 25,
No. 10, pp. 985-1005, 2002.

58 - Mahbadi, M.H., and Eslami, M.R., Cyclic Loading of Beams Based on
Prager and Grederick-Armstrong Kinematic Hardening Models, Int. J.
Mechanical Sciences, 44, pp. 859-879, 2002.

59 - Jabbari, M., Sohrabpoor, S., Eslami, M.R.,Mechanical and Thermal
Stresses in Functionally Graded Hollow Cylinder Due to Symmetric
Loading, Int. J. Pressure Vessel and Piping, 79, pp. 493-497, 2002.

60 - Najafizadeh, M.M., and Eslami, M.R.,  Buckling Analysis of Circular
Plates of Functionally Graded Materials under Uniform Radial Compression,
Int. J. Mechanical Science}, 44, pp. 2479-2493,Dec. 2002.

61 - Jabbari, M., Sohrabpoor, S., Eslami, M.R.,General Solution of Mechanical
and Thermal Stresses in Functionally Graded Hollow Cylinder Due to Non
axisymmetric Steady-State Loads,   Trans. ASME,J. Appl. Mech.,
Vol. 70, pp. 111-118, Jan. 2003.

62- Shiari, B., Eslami, M.R., and Shakeri, M.,Thermomechanical Shocks in
Composite Cylindrical Shells; A Coupled Thermoelastic Finite Element
Analysis, J. Scientia Iranica, Vol. 10, No. 1,pp. 13-22, 2003.

63 - Shahsiah, R., and Eslami, M.R., Thermal Buckling of Functionally
Graded Cylindrical Shells, J. Thermal Stresses},Vol. 26, No. 3, pp. 277-295, 2003.

64 - Tehrani, P., and Eslami, M.R., Boundary Element Analysis of Finite
Domain under Thermal and Mechanical Shock with the Lord - Shulman Theory,
Proceedings of I.Mech.E, Journal of Strain Analysis,Vol. 38, No. 1, 2003.

65 - Mahbadi, M.H., and Eslami, M.R., Load and Deformation Controlled
Cyclic Loading of Thick   Vessels Based on the Isotropic Hardening
Model, Trans.ISME, Vol. 4, No. 1, pp. 5-25, 2003.

66 - Shahsiah, R., and Eslami, M.R., Thermal and Mechanical Buckling of
Imperfect Spherical Cap, J. Thermal Stresses, Vol.26, No. 7,pp. 723-737, 2003.

67 - Hosseini-Tehrani, P., Eslami, M.R., and Shojaeefard, M.H.,Generalized
Thermoelastic Analysis of Layer Interface Excited by Pulsed Laser Heating,
J. Engineering Analysis with Boundary Elements, Vol. 27, Issue 9,
pp. 863-869, Oct. 2003.

68 - Shahsiah, R., and Eslami, M.R., Thermal Instability of Functionally
Graded Cylindrical Shell Based on the Improved Donnell Equations,
AIAA Journal, Vol. 41, No. 9, pp. 1819-1827, 2003.

69 - Heidary, F., and Eslami, M.R., Dynamic Analysis of Distributed
Piezothermoelastic Composite Plate Using First-Order Shear Deformation
Theory, J. Thermal Stresses, Vol. 27, No. 7, pp. 585-606, 2004.

70 - Mahbadi, M.H., and Eslami, M.R.,Elastic-Plastic-Creep Cyclic Loading of Beams Based on the Prager Kinematic Hardening Model,To be appeared in IMechE, 2004.

71 - Bagri, and Eslami, M.R., Generalized Coupled Thermoelasticity of Disks Based on the Lord-Shulman Model, To be appeared in J. Thermal Stresses, 2004.

72 - Taheri, H., Fariborz, S., and Eslami, M.R.,Thermoelasticity Solution of a Layer Using Green-Naghdi Model,J. Thermal Stresses,Vol. 27. No. , pp. 1-15, 2004.

73 - Mahbadi, M.H.,and Eslami, M.R., Elastic-Plastic-Creep Cyclic Loading of Beams Based on the Isotropic Hardening Model,ISME,Vol. 5, No. 1, pp. 61-75, 2004.

74 - Heidari, F. and Eslami, M.R., Pyroelectric Effect on Dynamic
Response of Coupled Distributed Piezothermoelectric Composite Plate,
J. Thermal Stresses, Vol. 28, No. 3,pp. 285-300, 2005.

75 -Hosseini-Tehrani, P., and Eslami, M.R., Stress and Temperature 
Distribution at Layer Interface Excited by Pulsed Laser Heating, IMechE,
J. Strain Analysis, Vol. 40, No. 5, pp. 395-402, 2005.

76 - Javaheri, R.,and Eslami, M.R., Buckling of Functionally Graded
Plates Under In-Plane Compressive Loading Based on Various Theories,
Transactions of ISME, Vol. 6,No. 1, pp. 76-93,March, 2005.

77 - Eslami, M.R.,Babaei, M.H., and Poultangari, R., Thermal and Mechanical
Stresses in a Functionally Graded Thick Sphere, Int. J. Pressure Vessels
and Piping, Vol.82, pp. 522-527, 2005.

78 - Samsam Shariat, B.A., Javaheri, R., and Eslami, M.R., Buckling of Imperfect Functionally Graded Plates Under In-Plane Compressive Loading, Thin-Walled Structures, Vol. 43/7, pp. 1020-1036, 2005.

79 - Taheri, H., Fariborz, S., and Eslami, M.R.,Thermoelastic Analysis of an Annulus using the Green-Naghdi Model,J. Thermal Stresses, Vol. 28, No. 9 pp. 911-927, 2005.

80 - Fathalizadeh, M., Salehzadeh, A., and Eslami, M.R., Layerwise  Analysis of Piezoelectric Composite Beams, Trans. ISME (Persian edition), Vol. 7, No. 1, pp. 24-51, 2005.

81 - Mirzavand, B., Eslami, M.R., and Shahsiah, R, Effect of Imperfection on Thermal Buckling of Functionally Graded Cylindrical Shells, J. AIAA, Vol. 43, No. 9, pp. 2073-2076, 2005.  

82 - Samsam, B., and Eslami, M.R., Effect of Initial Imperfections on Thermal Buckling of Functionally Graded Plates, J. Thermal Stresses, Vol. 28, No. 12, pp. 1183-1198, 2005.

 83 - Raeisi Najafi, A., Arshi, A.R., Eslami, M.R., Fariborz, S., and Moeinzadeh, M.H., Microcrack Interaction in Haverian Cortical Bone, Amirkabir J. Science and Engineering, Vol. 16, No. 61-A, pp. 47-55, 2005.

84 - Mirzavand, B., and Eslami, M.R., Thermal Buckling of Imperfect Functionally Graded Cylindrical Shells Based on the Wan-Donnell Model, J. Thermal Stresses, Vol. 29, No. 1, pp. 37-55, 2006.

85 - Hosseini-Tehrani, P., Eslami, M.R., and Azari, S.,Analysis of Thermoelastic Crack Problems Using Green-Lindsay Theory, J. Thermal Stresses, Vol. 29,No. 4, pp. 317-330, 2006.

86 - Bagri, A., Taheri, H., Eslami, M.R., and Fariborz, S., Generalized Coupled Thermoelasticity of a Layers, J.Thermal Stresses, Vol. 29, No. 4. pp. 359-370, 2006.

87 - Heidary, F., and Eslami, M.R., Piezo-Control of Forced Vibration of a Thermoelastic Composite Plate, Composite Structures,Vol. 74, Issue 1, pp. 99-105, July 2006.

88 - Bakhshi, M, Bagri, A., and Eslami, M.R., Coupled Thermoelasticity of Functionally Graded Disk,Mechanics of Advanced Materials and Structures, Vol. 13, No. 3, pp. 219-225, 2006.

89 - Samsam, B. and Eslami, M.R., Thermal Buckling of Imperfect Functionally Graded Plates, Int. J.Solids and Structures, Vol. 43, Issue 14-15, pp. 4082-4096, 2006.

90 - Shafii, H., Naii, M.H., and Eslami, M.R., Mechanical Buckling of Curved Beams made of FGM, Int. J.Mechanical Sciences, Vol. 48, Issue 8, pp. 907-915, 2006.

91 - Jabbari, M., Bahtui, A., and Eslami, M.R., Axisymmetric  Mechanical and Thermal Stresses in Thick long FGM Cylinders, J. Thermal Stresses, Vol. 29, No. 7, pp. 643-663, 2006.

92 - Mahbadi, M.H., and Eslami, M.R., Load and Deformation Controlled Cyclic Loading of Thick Pressure Vessels Based on Kinematic Hardening Model, Int. J. Pressure Vessels and Piping, Vol. 83, pp. 409-419, 2006.

93 - Shahsiah, R, Eslami, M.R., and Naj, R., Thermal Instability of Functionally Graded Shallow Spherical Shell,  J. Thermal Stresses, Vol. 29, No. 8, pp. 771-790,  2006.

94 - Mahbadi, H., and Eslami, M.R., Elastic-Plastic-Creep Analysis of Thick Vessels Based on the Isotropic Hardening Model,Trans. ISME ,Vol.7, No.1, pp. 78-93, 2006.

95 - Raeisi Najafi, A., Arshi, A.R., Eslami, M.R., Fariborz, S., and Moeinzadeh, M.H., Micromechanics Fracture of Haversian Cortyical Bone: An Analytical Approach,  Trans. ISME, Vol.7, No.1, pp.17-30, 2006.

96 - Bahtui, A. and Eslami, M.R., Coupled Thermoelasticity of Functionally Graded Cylindrical Shells, Accepted, Mechanics,Research Communications.

97 - Fathalizadeh, M., Salehzadeh, A., and Eslami, M.R., Free Vibration Analysis of Composite Beams using the Layerwise Theory, Accepted, Trans. ISME, (Persian edition).

98 - Samsam, B. and Eslami, M.R., Buckling of Thick Functionally Graded Plates under Mechanical and Thermal Loads,Accepted, J. Composite Structures.

99 - Shakeri, M., Eslami, M.R., and Daneshmehr, A., Dynamic Analysis of Thick Laminated Shell Panel with Piezoelectric Layer Based on Three-Dimensional Elasticity Solution, Accepted, Computer and Structure.

100 - Farmanzad, F., Najarian, S., Eslami, M.R., and Sadighi, A.S., Investigating the Biomechanical Behavior of Brain Tissue Based on the Comparison of Elastic and Hypereslastic Finite Element Models,(in Persian) Under review, Journal of Biomedical Engineering.

101 - Farmanzad, F., Najarian, S., Eslami, M.R., and Sadighi, A.S.,Determination of an Optimum Elastic Model for Biomechanical Behavior of Brain Tissue, (in Persian) Accepted, Amirkabir J. Science and Tech.

102 - Bahtui, A., and Eslami, M.R., Generalized Coupled Thermoelasticity of Functionally Graded Cylindrical Shells, Accepted, Int. J. for Numerical Methods in Engineering.

103 - Raeisi Najafi, A., Arshi, A.R., Eslami, M.R., Fariborz, S., and Moeinzadeh, M.H., Modeling of Osteonal Cortical Bone Micromechanics Fracture: General Solution of Microcracks    Interaction, Under review, Trans ASME, J. Biomechanical Engineering.

104 - Raeisi Najafi, A., Arshi, A.R., Eslami, M.R., Fariborz, S.,and Moeinzadeh, M.H., The Interaction Between Microcrack Propagation Trajectory and Microstructure and Material         Property of Haversian Cortical Bone, Accepted,Iranian J. Medical Engineering, (in Persian).

105 - Raeisi Najafi, A., Arshi, A.R., Eslami, M.R., Fariborz, S., and Moeinzadeh, M.H., Micromechanics Fracture in Osteonal Cortical Bone: A Study of the Interactions Between Microcrack Propagation, Microstructure and Material Property, Under review, J. Biomechanics.

106 - Sabzicar boroujerdy, M., and Eslami, M.R., Thermal Instability of Functionally Graded Truncated Conical Shells, Prepared for publication.

107 - Shahsiah, R., Nikbin, K., and Eslami, M.R.,Buckling Analysis of Beams made of Functionally Graded Material under Thermal Loading and with Various Boundary Conditions, Prepared for publication.

108 - Bagri, A., and Eslami, M.R., Generalized Coupled Thermoelasticity of Functionally Graded Annular Disk Considering the Lord-Shulman Theory, Submitted fro Review, Int. J. Solids &          Structures.



SOCIAL SERVICES

1 - President: Iranian Society of Mechanical Engineers
(ISME).
2 - Member, Board of Governors, Mahinieh Charity Clinic, Zarinnaal, Tehran.
The clinic provides almost free of charge medical services.
3
- Director, Mahinieh Charity Clinic, Zarinnaal, Tehran.
The clinic provides almost free of charge medical services.